![Sample our Physical Sciences journals, sign in here to start your FREE access for 14 days]({"type":"image" , "src" : "/sda/110819/TOC-Subject-Sample-2021-Physical-Sciences.jpg"})
Abstract
The effect of tapering the ends of the adherend on the joint strength and joint deformation behavior of a single lap joint geometry was studied. The joints were geometrically modeled using finite element (FE) techniques involving linear, as well as nonlinear (bilinear) material behavior. The FEA results were then compared with the experimental results for different single lap configurations, which had aluminum and steel adherends with different surface etch conditions, bonded using two different adhesives. The FEA results were found to be consistent with the experimental results with the normal and shear stresses significantly decreasing in the modified (tapered) geometries over those in unmodified geometries. The joint strength increased with decreasing taper angle, reaching a maximum at the smallest value considered (~10°).
