Influence of heating source position and dilution rate in achieving overmatched dissimilar welded joints

Abstract

The investigation addresses the overall performance of black and white joints (BWJ) of low carbon steel (LCS) and stainless steel thin sheets achieved by laser hybrid welding. Assuming that the structural integrity is directly influenced by the processing temperature, a thermal simulation of BWJ of thin sheets was developed. Afterwards, the base metals apportionment at joint formation, namely their distinct dilution rate, was originally estimated from the top surface temperature variation. Defect-free laser hybrid dissimilar welds were experimentally obtained using the selected filler metal and the energetic input from the process simulation, even for a critical analysed case of heat source displacement from the weld gap centreline towards LCS. Detailed macro and microstructural examination of the BWJ and related microhardness analysis results are presented. The tensile tests results indicate that in the case of transversally loaded BWJ, the positive difference in yield between the weld metal and the base materials protects the weld metal from being plastically deformed; the flat transverse tensile specimens loading up to failure reveals large strains in LCS, far away from the weld.

Keywords:

• BLACK AND WHITE JOINT
• FEM
• LASER HYBRID WELDING
• OVERMATCHING JOINT
• HARDNESS
• TENSILE TEST