Inoculation and its effect on primary solidification structure of hypoeutectic grey cast iron

Abstract

The solidification of grey cast iron is controlled by the addition of inoculants. This is done in order to provide nucleation sites and hence facilitate the formation of eutectic cells and decrease the degree of undercooling. The number of eutectic cells and the graphite morphology affect the final properties of the casting. Preceding the nucleation of graphite and the eutectic cells is the nucleation of the primary austenite. It was found that the addition of inoculants also influences the primary solidification. The largest effect on the primary dendrites is obtained by inoculation using pure iron powder. It was also shown how the columnar to equiaxed transition (CET) depends on the number of equiaxed dendrites per unit volume. In addition, the primary structure was found to influence the eutectic solidification. The relationship between the secondary dendrite arm spacing and the eutectic cell size was found to correlate well with the work of others.

Keywords:

• GREY CAST IRON
• EQUIAXED DENDRITES
• CET
• PRIMARY AUSTENITE
• INOCULATION
• EUTECTIC CELLS