Development of high performance Mg–Al₂O₃ composites containing Al₂O₃ in submicron length scale using microwave assisted rapid sintering

Abstract

In the present study, magnesium composites reinforced with different volume fraction of submicron size Al₂O₃ particulates were synthesised using powder metallurgy technique incorporating an innovative microwave assisted rapid sintering technique. The sintered materials were subsequently hot extruded for characterisation in terms of microstructural, physical and mechanical properties. Microstructural characterisation results revealed a reasonably uniform distribution of Al₂O₃ particulates, minimal porosity and good matrix reinforcement interfacial integrity. The average coefficient of thermal expansion (CTE) value for Mg–Al₂O₃ composites was found to decrease with increasing amount of submicron Al₂O₃ particulates. Mechanical characterisation of the composites revealed an increase in hardness, elastic modulus, 0·2% YS and ultimate tensile strength (UTS) with the increase in amount of alumina particulates. Ductility exhibited the reverse trend. An attempt is made in the present study to correlate the effect of the presence of submicron alumina and its increasing amount with the microstructural, physical and mechanical properties of magnesium.

Keywords:

• POWDER METALLURGY
• MICROWAVE SINTERING
• METAL MATRIX COMPOSITES
• MICROSTRUCTURE
• MECHANICAL PROPERTIES