Transformation of austenite remaining after intercritical rolling to ferrite

Abstract

The impact of austenite deformation in the intercritical range on the rate of transformation in continuous cooling to ferrite, pearlite, bainite or martensite has been studied. The austenite associated with the rolled ferrite is much higher in carbon content, which does not influence the pearlite transformation but retards bainite and martensite. Furthermore, in comparison with rolling of stable austenite the increased strain hardening of the intercritically cooled austenite accelerates the formation of ferrite and pearlite (+ 10–30°C) and refines them but retards the bainite and martensite transformations (−20–40°C). At the intermediate cooling rate near 16 K s⁻¹, these several influences combined with near doubling of the ferrite production give rise to the suppression of bainite formation and to maximum increased delay of martensite start.

Keywords:

• LOW CARBON STEEL
• ROLLING
• INTERCRITICAL RANGE
• PHASE TRANSFORMATIONS