19
Views
8
CrossRef citations to date
0
Altmetric
Articles

Predicting optimum hollowness of normally loaded cylindrical rollers using finite element analysis

&
Pages 176-183 | Published online: 19 Jul 2013
 

Abstract

Fatigue life investigations have been made for hollow rollers in pure normal loading. Different hollowness percentages between 20 and 80% have been tested to find the optimum percentage hollowness that gives the longest fatigue life. Two main models were built for this purpose: model 1 with two identically sized rollers and model 2 with two non-identically sized rollers. In each model, two cases have been studied: when both rollers are hollow and when one roller is hollow while the other one is solid. The Ioannides–Harris (IH) theory was used to calculate the relative fatigue life of the hollow rollers with respect to solid rollers under the same loading. Investigations have been made for five different materials: CVD 52100, carburised steel, VIMVAR M50, M50NiL and induction hardened steel. The finite element package ABAQUS has been used to study the stress and deformations in the loaded rollers. In general, the optimum hollowness percentage with the longest fatigue life ranges between 60 and 70% based on the kind of the material, whether the rollers are of the same or different size and whether one or both rollers are hollow. Using the IH theory for fatigue life calculation resulted in having infinite fatigue life for those rollers made of induction hardened steel that relatively has high fatigue limit value. Rollers in the optimum range are flexible enough to get the best redistribution of stress in the contact zone. For models of a hollow cylindrical roller in contact with a solid roller, the optimum hollowness is around 70%. When both cylindrical rollers are hollow, the optimum hollowness decreases between 60 and 65%. At the optimum hollowness, small differences in the fatigue life have been found between models of one hollow roller and models of two hollow rollers, even though having both hollow rollers means less weight, thus saving more material and more stability for the system.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.