Mechanical performance of three thickness resistance spot welded low carbon steel

Abstract

Resistance spot welding is the dominant process for joining sheet metals in automotive industry. Despite the application of three thickness resistance spot welds in this industry, present guidelines and recommendations are limited to two thickness spot welds. Study towards better understanding of weld nugget growth and mechanical properties is the first step to understanding the welding behaviour and developing proper guidelines for the three thickness resistance spot welding. In this paper, weld nugget growth, mechanical performance and failure behaviour of three thickness low carbon steel resistance spot welds are investigated. Macrostrcutural and microstructural investigations, microhardness tests and quasi-static tensile–shear tests were conducted. Mechanical performance of the joint was described in terms of peak load, energy absorption and failure mode. In order to understand the failure mechanism, micrographs of the cross-sections of the spot welded joints during and after tensile–shear are examined by optical microscopy. Unlike two thickness resistance spot welded joint, weld nugget was formed in the geometrical centre of the joint (i.e. centre of the middle sheet). Weld nugget size along sheet/sheet interface was greater than that of along geometrical centre of the joint. Increasing welding time leads to increases in peak load and energy absorption of the joint and transition of interfacial failure mode to pullout failure mode, primarily due to the enlargement of weld nugget size along sheet/sheet interface.

Keywords:

• Resistance spot welding
• Three thickness spot weld
• Weld nugget growth
• Failure mode