![Sample our Engineering & Technology journals, sign in here to start your access, latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/5933/TOC-Subject-Sample-2021-Engineering-Tech.jpg"})
Abstract
Australia is a major world producer of heavy minerals from mineral sand deposits, but to maintain its premier position in the world market place, the development of large resources such as in the Murray Basin will be necessary. There are two types of deposits in the Murray Basin, the fine-grained (20–80 μm) WIM-type deposits and those with coarser mineralisation (90–300 μm), similar to other Australian deposits. Only the higher grade, coarse-grained deposits have been exploited, with little or no value realised from the majority ilmenite component because of its complex mineralogy.
Compositional data for ilmenites from deposits across the basin are presented and potential processing options for them taking into account the grain size, composition and impurity element contamination are discussed. In particular, processes to lower chromia levels and fluidised bed and kiln-based processes to upgrade weathered ilmenites to suitable pigment feedstocks are discussed. Recommendations regarding further research required to enable commercial development of Murray Basin ilmenites are given.
Acknowledgements
Discussions with Sean Rooney, Renee Kjar and Peter Dudzinski of the Victorian Department of State Development, Business and Innovation and with CSIRO colleagues David Freeman, Dr Ian Grey and Dr Seng Lim in the preparation of this document are gratefully acknowledged. The assistance of CSIRO library staff at Clayton in obtaining references for the review is acknowledged. This paper is published with the permission of the Victorian Department of State Development, Business and Innovation.