Gold nanoparticle-based colorimetric method for the detection of prostate-specific antigen

Abstract

Background

Prostate-specific antigen (PSA), a serine protease, is a biomarker for preoperative diagnosis and screening of prostate cancer and monitoring of its posttreatment.

Methods

In this work, we reported a colorimetric method for clinical detection of PSA using gold nanoparticles (AuNPs) as the reporters. The method is based on ascorbic acid (AA)-induced in situ formation of AuNPs and Cu²⁺-catalyzed oxidation of AA. Specifically, HAuCl₄ can be reduced into AuNPs by AA; Cu²⁺ ion can catalyze the oxidation of AA by O₂ to inhibit the formation of AuNPs. In the presence of the PSA-specific peptide (DAHSSKLQLAPP)-modified gold-coated magnetic microbeads (MMBs; denoted as DAHSSKLQLAPP-MMBs), complexation of Cu²⁺ by the MMBs through the DAH–Cu²⁺ interaction depressed the catalyzed oxidation of AA and thus allowed for the formation of red AuNPs. However, once the peptide immobilized on the MMB surface was cleaved by PSA, the DAHSSKLQ segment would be released. The resultant LAPP fragment remaining on the MMB surface could not sequestrate Cu²⁺ to depress its catalytic activity toward AA oxidation. Consequently, no or less AuNPs were generated.

Results

The linear range for PSA detection was found to be 0~0.8 ng/mL with a detection limit of 0.02 ng/mL. Because of the separation of cleavage step and measurement step, the interference of matrix components in biological samples was avoided.

Conclusion

The high extinction coefficient of AuNPs facilitates the colorimetric analysis of PSA in serum samples. This work is helpful for designing of other protease biosensors by matching specific peptide substrates.

Keywords:

• colorimetric assay
• gold nanoparticles
• prostate-specific antigen
• ascorbic acid
• Cu²⁺ ion

Introduction

Prostate cancer is one of the most prevalent forms of silent killers among men worldwide. It accounts for up to 29% of all cancer cases and 13% of deaths.¹ Prostate-specific antigen (PSA) is a 33-kDa androgen-regulated serine protease of the kallikrein family that is secreted by the epithelial cells of the prostate gland. Normally, a healthy prostate releases <4 ng/mL PSA into the circulatory system.^1,2 However, the PSA concentrations are often elevated in the presence of prostate cancer or other prostate disorders. Thus, PSA has been believed to be the current gold standard biomarker for preoperative diagnosis and screening of prostate cancer and monitoring of its posttreatment.¹ For example, in the USA, the US Food and Drug Administration has approved the PSA test for annual screening of prostate cancer in men aged ≥50 years. The patient needs to be informed of the risks and benefits of PSA testing prior to performing the test. However, the conventional methods for PSA detection are time-consuming, laborious, and expensive and require fluorescent- or enzyme-labeling and complicated instruments, including enzyme-linked immunosorbent assays, fluorescence immunoassays, electrochemical immunoassays, colorimetric immunoassays, and chemiluminescence immunoassays.^1,3–6 Therefore, simple, rapid, cost-effective, and high-throughput methods for PSA detection are desired.

PSA is a serine protease to hydrolyze the peptide bond. Since the discovery of a PSA-specific peptide substrate with a core region of HSSKLQ,⁷ a few novel methods based on the proteolysis reaction have been developed for PSA detection, including fluorescence,^8,9 electrochemistry,^10–15 surface-enhanced Raman spectroscopy,¹⁶ colorimetry,¹⁷ and electrogenerated chemiluminescence.^18,19 Among these techniques, gold nanoparticles (AuNPs)-based colorimetric assays are in particular prevalent in the past 20 years for biomarker detection because AuNPs show a high extinction coefficient, and the color change can be easily detected with naked eye or spectrometry for quantitative analysis.^20–24 For protease detection, the peptide substrates are usually functionalized with one or more cysteine residues or positively charged amino acid residues including Lys and Arg.^25–33 Cleavage of a single peptide into two shorter fragments by the specific protease prevents the peptide substrate-induced aggregation or facilitates the fragment-triggered aggregation of AuNPs based on the Au–S and/or electrostatic interactions. Nonetheless, to trigger the AuNP aggregation, the peptide substrate must be well designed. The thiol groups in substrate peptide may inhibit protease activity by breaking disulfide bonds in the enzyme molecule or be oxidized to form the disulfide bonds between the substrate.²⁸ Moreover, some matrix components in biological fluids such as serums may affect the stability of unmodified AuNPs. For these reasons, the practical applications of AuNP-based colorimetric assays for the clinical detection of proteases including PSA are still limited.

Ascorbic acid (AA) is a commonly used reducing agent for the growth of metal (eg, Au and Ag) nanoparticles.^34,35 Free Cu²⁺ ion can initiate the catalyzed oxidation of AA in the presence of O₂.³⁶ In this process, AA is oxidized into dehydroascorbate by free Cu²⁺ ion; then, the resultant Cu⁺ ion is subsequently oxidized into Cu²⁺ by O₂. Thus, the oxidation of AA is promoted by the Cu²⁺-initiated redox cycling, which can be described as follows:

However, the complexation of Cu²⁺ ion by peptide may change its catalytic activity. For example, amino terminal copper and nickel (ATCUN)-binding peptide with a structural characterization comprising of a free NH₂-terminus, a histidine (His) residue in the third position and two intervening peptide nitrogens (denoted as NH₂–X–X–His sequence) exhibits high affinity to Cu²⁺ ion.^37–40 The formation of ATCUN–Cu²⁺ complex depresses Cu²⁺-initiated redox cycling for AA oxidation.⁴⁰ In this work, we demonstrated that the PSA substrate peptide (DAHSSKLQLAPP) that contains an ATCUN motif of DAH can sequestrate Cu²⁺ by the formation of ATCUN–Cu²⁺ complex (Figure 1A), thus depressing the Cu²⁺-catalyzed oxidation of AA. Based on this fact, we developed a colorimetric method for the detection of PSA in human serums by employing magnetic microbeads (MMBs, Figure 1B). Figure 1C shows the detection principle. HAuCl₄ can be reduced into AuNPs by AA; Cu²⁺ ion promotes the oxidation of AA, thus preventing the production of AuNPs. The peptide immobilized on the MMB surface can sequestrate Cu²⁺ ion, thus inhibiting the Cu²⁺-catalytic oxidation of AA and facilitating the generation of AuNPs. However, once the peptide on the MMB surface is cleaved by PSA, the ATCUN-containing fragment of DAHSSKLQ would be released. The resultant MMBs cannot inhibit the Cu²⁺-catalytic oxidation of AA, thus disfavoring the formation of AuNPs. The high extinction coefficient of the generated AuNPs enables the quantitative and sensitive colorimetric analysis of PSA in serums.

Figure 1 (A) Cleavage of peptide DAHSSKLQLAPP by PSA and the structure of ATCUN–Cu²⁺ complex formed between DAHSSKLQLAPP and Cu²⁺. (B) SEM image and EDS elemental mapping images of the Au-coated MMBs. (C) Schematic representation of the MMB-based method for PSA detection.

Abbreviations: ATCUN, amino terminal copper and nickel; AuNPs, gold nanoparticles; EDS, energy-dispersive spectroscopy; MMBs, magnetic microbeads; PSA, prostate-specific antigen; SEM, scanning electron microscope.

Materials and methods

Materials

Peptides were synthesized and purified by China Peptides Co. Ltd. (Shanghai, People’s Republic of China). Trypsin, hemoglobin, and AA were obtained from Sangon Biotech Co. Ltd. (Shanghai, People’s Republic of China). Bovine serum albumin, thrombin, K₂HPO₄, KH₂PO₄, and 6-mercapto-1-hexanol were purchased from Sigma-Aldrich Co. (Shanghai, People’s Republic of China). Hexadecyltrimethylammonium chloride (CTAC) and other reagents were of analytical grade and obtained from the Aladdin Reagent Company (Shanghai, People’s Republic of China). All solutions were prepared freshly with deionized water. The serum samples were supplied by the Anyang Tumor Hospital, People’s Republic of China.

Kinetic measurements

The kinetic measurements for probing of AA oxidation were conducted on a Cary 50 ultraviolet–visible (UV–Vis) spectrophotometer with a fixed wavelength of 265 nm. To make sure that the amount of free Cu²⁺ remaining in solution is negligible, the peptide/Cu²⁺ concentration ratio was kept at 1.5:1. The stock AA concentration was determined with an extinction coefficient (ε) of 1.5×10⁴ M⁻¹cm⁻¹ at 265 nm.⁴¹

AA-induced growth of AuNPs

To demonstrate the formation of AuNPs with AA as the reducing reagent, 250 µL of different concentrations of AA in a phosphate buffer (10 mM, pH =7.0) was first mixed with 200 µL of 500 µM CTAC solution. This was followed by the addition of 50 µL of 2 mM HAuCl₄ in batches (5 µL per drop). After incubation for 2 minutes, the photographic images were taken by a mobile phone, and the absorption spectra were recorded with the UV–Vis spectrophotometer. To demonstrate the effect of Cu²⁺ species on the AA-induced growth of AuNPs, the AA stock solution was preincubated with Cu²⁺ in the absence or presence of DAHSSKLQLAPP-functionalized MMBs at ambient temperature for 30 minutes.

Preparation of peptide-functionalized MMBs

The Au-coated MMBs were prepared with the procedure in the previous report,⁴² which were characterized by scanning electron microscope (JSM-7800F; JEOL, Tokyo, Japan) and energy-dispersive spectroscopy (NS7; Thermo Fisher Scientific, Waltham, MA, USA; Figure 1A). Immobilization of the thiolated peptide (DAHSSKLQLAPPC) was performed by mixing 50 mg Au-coated MMBs with 0.5 mL of 1 mM peptide in phosphate buffer for 3 hours. The peptide was attached onto the Au-coated MMB surface through the Au–S interaction. After magnetic separation, the content of free peptide in the residue liquid was determined by LCT Premier XE mass spectrometry (Waters, Milford, MA, USA). From the standard curve method, the absorption capability of Au-coated MMBs to peptide was found to be 7.8 nmol/mg. To block the unreacted gold surface, the peptide-covered Au-coated MMBs were incubated with 1 mM 6-mercapto-1-hexanol for 15 minutes, followed by magnetic separation and washing with 50% ethanol.

PSA detection

For PSA detection, 4 mg of peptide-functionalized MMBs was incubated with 200 µL of PSA solution or serum sample in the phosphate buffer for 40 minutes at 30°C. After magnetic separation and washing with acetic acid (pH=4.0) and water, the resultant MMBs were dispersed in 150 µL of 3 µM Cu²⁺ in the phosphate buffer. This was followed by the addition of 150 µL of 400 µM AA and incubation for 30 minutes. Then, 250 µL of the suspension was taken out and added to 200 µL of 500 µM CTAC solution, which was followed by the addition of 2 mM HAuCl₄ in batches. The change of solution color was observed with naked eyes, and the absorption spectra were recorded by using the UV–Vis spectrophotometer. The photographic images were taken by using the camera in a mobile phone. The absorption spectra were collected on the UV–Vis spectrophotometer.

Results and discussion

Cu²⁺-catalyzed oxidation of AA

To demonstrate the catalyzed activity of Cu²⁺ toward AA oxidation in the absence and presence of different peptides, the kinetics of AA consumption by O₂ was examined by monitoring the change of AA absorbance at 265 nm. As shown in Figure 2A, the absorbance intensity of AA itself decreased slightly, indicating that the autoxidation of AA is slow. However, in the presence of Cu²⁺, AA became rapidly consumed, demonstrating that the oxidation of AA was promoted by Cu²⁺. Interestingly, in the presence of ATCUN peptide (DAHSSKLQLAPP), no apparent decrease in the absorbance intensity was observed. This result indicated that the catalytic activity of Cu²⁺ toward AA oxidation was depressed by DAHSSKLQLAPP. The result is acceptable since the ATCUN–Cu²⁺ complex can depress the Cu²⁺-initiated redox cycling for AA oxidation.⁴⁰ However, the presence of LAPP (one of the cleavage products) did not inhibit the Cu²⁺-catalytic oxidation of AA. In addition, we found that the absorption intensity of AA almost decreased to the background level after incubation with the mixture of Cu²⁺ and LAPP-functionalized MMBs for 30 minutes (Figure 2B). Nevertheless, no significant decrease in the absorption intensity was observed when AA was incubated with the mixture of Cu²⁺ and DAHSSKLQLAPP-functionalized MMBs. These results demonstrated that the proposed strategy can be used to develop PSA biosensor based on the ATCUN–Cu²⁺ interaction and the catalytic oxidation of AA.

Figure 2 (A) Change of 100 µM AA absorbance as a function of reaction time in the absence and presence of different Cu²⁺ species. The concentrations of peptide and Cu²⁺ are 3 and 2 µM, respectively. The absorbance values plotted have excluded that contributed by the buffer and individual peptide. (B) UV–Vis absorption spectra of 50 µM AA before and after incubation with the mixture of Cu²⁺ (0.5 µM) and peptide-functionalized MMBs.

Abbreviations: Abs, absorption; AA, ascorbic acid; MMBs, magnetic microbeads; UV–Vis, ultraviolet–visible.

Formation of AuNPs

With CTAC as the stabilizer, HAuCl₄ can be reduced into AuNPs with neurotransmitters as active reducing agents.⁴³ The formation of AuNPs does not need any nanoparticle seeds. Based on the optical property of the generated AuNPs, the quantitative analysis of the neurotransmitters has been performed. Herein, we found that HAuCl₄ can also be reduced into AuNPs by AA with CTAC as the stabilizer. As shown in Figure 3A, the mixed solution of AA and CTAC became red after the addition of HAuCl₄ (tube a) and exhibited an absorption peak at ~530 nm (curve a). The absorption peak is ascribed to the surface plasmon resonance of the generated AuNPs. The transmission electron microscope image indicated that the AuNPs are nearly monodispersed, spherical nanoparticles within very similar particle dimensions (Figure 3B). The size of AuNPs is in agreement with that obtained by using dopamine as the reducing reagent.⁴³ We also found that the addition of HAuCl₄ in batches into different concentrations of AA solution did not cause significant difference in the size of AuNPs. When AA was preincubated with the mixture of Cu²⁺ and DAHSSKLQLAPP-functionalized MMBs for 30 minutes, a strong absorption peak and a red color were still observed after adding HAuCl₄ into the above mixed solution (curve/tube b). No difference in the size of the generated AuNPs was observed when AA was incubated with and without DAHSSKLQLAPP-functionalized MMBs (Figure 3C). The result indicated that DAHSSKLQLAPP-functionalized MMBs/Cu²⁺ did not depress the generation of AuNPs. However, when the HAuCl₄ solution was added into the mixed solution of AA and LAPP-functionalized MMBs/Cu²⁺ under the same condition, a colorless solution was obtained, and a lower absorption peak was observed. This implied that no or less AuNPs were generated. This is understandable since the oxidized AA (dehydroascorbate) cannot reduce HAuCl₄ into AuNPs. The asymmetric absorbance in this case is attributed to the absorbance of yellowish HAuCl₄ and CTAC. Thus, the formation of AuNPs is dependent upon the interaction of Cu²⁺ and peptide-functionalized MMBs and the Cu²⁺-catalyzed oxidation of AA.

Figure 3 UV–Vis absorption spectra and photographic images (A) of HAuCl₄ and CTAC after incubation with different solutions. In curve a, AA (250 µM) was not incubated with Cu²⁺ and peptide-functionalized MMBs. In curves/tubes b and c, AA (250 µM) was preincubated with the mixture of 1.5 µM Cu²⁺ and peptide-functionalized MMBs for 30 minutes. TEM images of the AuNPs generated via the reduction of HAuCl₄ by AA that has been incubated without (B) and with (C) Cu²⁺/DAHSSKLQLAPP-MMBs.

Abbreviations: Abs, absorption; AA, ascorbic acid; AuNPs, gold nanoparticles; CTAC, hexadecyltrimethylammonium chloride; MMBs, magnetic microbeads; TEM, transmission electron microscope.

Optimization of experimental conditions

In this method, AA was used as the reducing reagent for the formation of AuNPs. Thus, its concentration plays a decisive role in the formation of AuNPs. As shown in Figure 4A, the absorption intensity of the generated AuNPs at 530 nm increased with the increase of AA concentration in the range of 10–250 µM and began to level off beyond 200 µM. AA at the used concentration of 10 µM can be readily determined. In addition, Cu²⁺ concentration has a profound influence on the catalyzed oxidation of AA. Thus, we also investigated the effect of Cu²⁺ concentration on the absorption intensity. When AA was preincubated with different concentrations of Cu²⁺ for 30 minutes, the absorbance value decreased with increasing concentration of Cu²⁺ (Figure 4B). This demonstrated that high concentration of Cu²⁺ facilitated the oxidation of AA and thus disfavored the generation of AuNPs. As depicted in Figure 3, DAHSSKLQLAPP-functionalized MMBs can sequestrate Cu²⁺ and depress its catalytic capability of oxidizing AA, thus favoring the formation of AuNPs. We also found that the absorbance value increased with increasing concentration of DAHSSKLQLAPP-functionalized MMBs and reached to the maximum at 4 mg (Figure 4C). The good dependence of the absorption intensity upon the MMB concentration demonstrated that it is possible to determine PSA by removing the ATCUN-containing peptide fragment (DAHSSKLQ) from the MMB surface.

Figure 4 Dependence of the absorption intensity of AuNPs suspension at 530 nm upon the used concentration of AA (10, 50, 100, 150, 200, and 250 µM) (A), Cu²⁺ (0.01, 0.1, 0.5, 1, 1.5, and 2 µM) (B), and DAHSSKLQLAPP-functionalized MMBs (0.5, 1, 2, 3, 4, and 5 mg) (C). In panels B and C, the concentration of AA used is 200 µM. The Cu²⁺ concentration in panel C is 1.5 µM.

Abbreviations: Abs, absorption; AA, ascorbic acid; AuNPs, gold nanoparticles; MMBs, magnetic microbeads.

PSA detection

Under the optimal conditionals, the feasibility of the proposed method for PSA detection was demonstrated. Figure 5A represents the photographic images, and the UV–Vis absorption spectra when DAHSSKLQLAPP-functionalized MMBs were preincubated with different concentrations of PSA, followed by incubating the resultant MMBs with Cu²⁺ and AA before the addition of HAuCl₄. With the increase in PSA concentration, the red color solution became colorless gradually. The result was also confirmed by the UV–Vis spectroscopy: the more higher the PSA concentration, the more lower the plasmon absorbance peak of AuNPs. The value decreased linearly with an increase in PSA concentration in the range of 0–0.8 ng/mL with an equation of Abs=0.697−0.673 (PSA) ng/mL (Figure 5B). The detection limit was estimated to be 0.02 ng/mL by detecting the smallest PSA concentration at which the response is clearly distinguishable from the background. This value is comparable to those achieved by other methods based on the PSA-induced cleavage of peptide (Table 1). The value is lower than that (4 ng/mL) of PSA released by a healthy prostate; thus, the colorimetric method is promising to determine PSA in a biological sample for preoperative diagnosis and screening of prostate cancer.

Table 1 Analytical performances of the peptide-based methods for PSA detection

Method	Substrate	Label	Detection limit	Linear range	References
Colorimetry	GSGSGSGSEHSSKLQLAKGSGSGSGSC	MBs	10 ng/mL	Not reported	^Citation17
EC	SH–(CH2)6–HSSKLK-biotin	Au@Ag NPs	0.027 ng/mL	0.1–100 ng/mL	^Citation10
EC	Biotin–EHSSKLQKC	Strep-MBs	0.03 ng/mL	0.08–7 ng/mL	^Citation12
EC	CEHSSKLQLAK–NH2	Chitosan-Pb2[Fe(CN)6]-PDDAGO	0.01 fg/mL	10^−6–100 ng/mL	^Citation11
EC	CEHSSKLQLAK–NH2	PDA-Au-HRP	0.11 fg/mL	10^−6–100 ng/mL	^Citation14
EC	KALQLKSSHEC	AuNPs/CTAB	60 fg/mL	0.0002–45 ng/mL	^Citation13
EC	CHSSKLQK	Not reported	0.5 ng/mL	1–60 ng/mL	^Citation15
ECL	CHSSKLQK–Fc	Fc	0.8 pg/mL	0.0005–5 ng/mL	^Citation18
ECL	CHSSKLQK	Ru1	80 fg/mL	0.0005–0.03 ng/mL	^Citation19
FL	FITC–HSSKLQK	FITC/GO	0.3 nM	0.5–3 nM	^Citation8
FL	CCCCCCGLAibAAGGHSSLKQGK–FITC	FITC/AuNPs	0.01 nM	0.01–100 nM	^Citation9
SERS	R19–HSSKLQLAAAC	NPR	6 pM	0.006–6 nM	^Citation16
Colorimetry	DAHSSKLQLAPP	ATCUN–Cu^2+	0.02 ng/mL	0.05–0.8 ng/mL	This work

Abbreviations: ATCUN, amino terminal copper and nickel; AuNPs, gold nanoparticles; MBs, magnetic beads; chitosan-Pb₂[Fe(CN)₆]-PDDAGO, chitosan-lead ferrocyanide-(poly[diallyldimethylammonium chloride]-graphene oxide); CTAB, cetyltrimethylammonium bromide; EC, electrochemistry; ECL, electrogenerated chemiluminescence; Fc, ferrocenecarboxylic acid; FITC, fluorescein isothiocyanate; FL, fluorescence; GO, graphene oxide; NP, nanoparticle; NPR, nanoplasmonic resonators; PDA-Au-HRP, polydopamine-Au-horseradish peroxidase nanocomposites; PSA, prostate-specific antigen; R19, Rhodamine 19; Ru1, bis(2,2′-bipyridine)-4′-methyl-4-carboxybipyridine-ruthenium; SERS, surface-enhanced Raman spectroscopy; strep-MBs, streptavidin-coated magnetic beads.

Figure 5 (A) UV–Vis absorption spectra and photographic images of the generated AuNPs in the cases that the DAHSSKLQLAPP-functionalized MMBs have been preincubated with different concentrations of PSA (0, 0.05, 0.1, 0.2, 0.4, 0.6, 0.8, 1, and 2 ng/mL). (B) Dependence of the absorption intensity of the generated AuNPs on PSA concentration.

Abbreviations: Abs, absorption; AuNPs, gold nanoparticles; PSA, prostate-specific antigen; MMBs, magnetic microbeads.

Selectivity and real sample assays

To demonstrate the applicability of the sensor, we first examined its selectivity toward PSA by testing the influence of proteins (bovine serum albumin and hemoglobin), AA, and other proteases (thrombin and trypsin). As shown in Figure 6A, a lower absorption value was obtained for 0.8 ng/mL PSA, while negligible changes in the absorption intensity were observed in the presence of at least 10-fold higher concentrations of the tested proteins. The result is indicative of high selectivity of the method, which can be attributed to the high specificity of the peptide substrate (HSSKLQ) toward PSA.^7,18,19 In addition, AA itself also did not induce any significant change. The result is understandable since the analytical detection was carried out by the magnetic separation of cleavage step and measurement step, thus reducing the interference of matrix components in biological samples.

Figure 6 (A) Selectivity of the method: PBS blank (bar 1), 10 ng/mL thrombin (bar 2), 10 ng/mL trypsin (bar 3), 50 ng/mL hemoglobin (bar 4), 50 ng/mL BSA (bar 5), 200 µM AA (bar 6), and 0.8 ng/mL PSA (bar 7). (B) Assays of PSA in the serums of healthy donors and prostate patients.

Abbreviations: AA, ascorbic acid; BSA, bovine serum albumin; PBS, phosphate-buffered saline; PSA, prostate-specific antigen.

To demonstrate the viability of the method for clinical assays, quantifications of PSA in serum samples from two healthy donors and two prostate patients were carried out. It can be clearly observed that the solution color is red for healthy controls, but it is colorless for patients (Figure 6B). By diluting the two healthy sample solutions for 10 times, the PSA concentrations were found to be 0.94 ng/mL and 1.14 ng/mL (n=3) according to the above established standard curve. However, for 10 times dilution, we found that the levels of PSA in the patient serums were beyond the linear range. Thus, the quantification of PSA for patients was performed by further diluting the samples with 20-fold. It was found that PSA concentrations in the two patients were 8.86 ng/mL and 9.30 ng/mL (n=3), which were much higher than those in the healthy controls. The result indicated that the colorimetric method is feasible for distinguishing prostate patients from healthy controls.

Conclusion

In this work, we developed a colorimetric method for PSA detection by inhibition of the formation of AuNPs. The separation of cleavage step and measurement step by peptide-functionalized MMBs facilitates the selective detection of PSA in serum samples. The method is fundamentally distinct from the existing peptide-based sensing strategies for PSA detection. It is very promising to be used in laboratory investigation and clinical diagnosis because it requires a simple sample handling procedure and a minimum instrumental investment. Moreover, this work is valuable for designing of high-throughput protease biosensors and likely finds many applications in other fields, including screening of protease inhibitor and probing of disease progression.

Acknowledgments

We acknowledge the financial support of the National Natural Science Foundation of China (21305004), the Program for Science and Technology Innovation Talents at the University of Henan Province (18HASTIT005), the Joint Fund for Fostering Talents of National Natural Science Foundation of China and Henan Province (U1304205), the Science & Technology Foundation of Henan Province (17A150001), and the Program for Innovative Research Team of Science and Technology in the University of Henan Province (16IRTSTHN003).

Disclosure

The authors report no conflicts of interest in this work.