Abstract
A major problem in high-gain post-aural hearing aids is acoustic feedback. One of the sources of feedback is the plastic tubing that guides the sound from the hearing aid hook to the ear canal. The objectives of this study were to determine the effects of increases in tubing wall thickness on the amount of acoustic feedback in the hearing aid system and to characterize earmould tubing. Five different samples of Tygon tubing were tested, of which four had different wall thicknesses; the study also compared Tygon tubing with medical grade PVC tubing. Measurement of the wall thickness, taken from scanning electron micrographs, showed that the wall thickness differed from the National Association of Earmould Laboratories standard by less than 6% and was well within the manufacturer's tolerances. Measurement of sound attenuation showed that an increase in the tubing wall thickness of 0.330 mm (Tygon 13 Standard to Tygon 13 Double Wall) caused an increase in sound attenuation of 2 dB, across the frequency range measured (0.5–4 kHz). It was also found that the medical grade PVC had a 5 dB greater sound attenuation than the equivalent Tygon tubing. While these differences are quite small, they could contribute to a reduction in acoustic feedback when used in conjunction with other hearing aid or earmould improvements.