Determination of the Acidic Degradation Products, Acetic, Propionic, Butyric, and Phthalic Acid in Aqueous Pseudolatexes of Cellulosic Esters by High Performance Liquid Chromatography

Abstract

An isocratic, reversed-phase HPLC method was developed to quantify the organic acids, acetic, propionic, butyric, and phthalic acid, formed as a result of ester hydrolysis, in pseudolatexes of cellulosic esters. Colloidal dispersions of cellulose acetate, cellulose acetate butyrate, and cellulose acetate propionate were prepared by a microfluidization-solvent evaporation method. Dispersions of cellulose acetate phthalate were prepared by redispersion of a spraydried commercial pseudolatex. The acids were detected at 210 nm, the mobile phase being 0.025 M phosphate buffer: methanol (80:20 v/v%, pH 3.0). The peak height response was linear over the studied concentration range of 2 – 10 mM/L for the aliphatic acids and 20–100 μM/L for phthalic acid. The minimum detectable quantities for acetic, propionic, butyric, and phthalic acid were 0.02 mM/L, 0.05 mM/L, 0.1 mM/L, and 0.0005 mM/L, corresponding to a % change in acetyl, propionyl, butyryl, and phthalyl content of 4.0 × 10⁴, 1.2 × 10³, 2.9 × 10³, and 2.8 × 10⁻⁵ for a 30% w/v pseudolatex. The colloidal polymer particles were separated by ultracentrifugation, filtration, or flocculation with aluminum chloride solution before analysis of the aqueous phase. Similar acid concentrations were obtained for the three separation methods. The recovery from spiked samples was almost complete for acetic, approximately 90% for propionic acid, and less than 80% for butyric acid.