ABSTRACT
Context: Adhesives are used in several different manufacturing operations in the production of cigarettes. The use of new, “high-speed-manufacture” adhesives (e.g. vinyl acetate based) could affect the smoke chemistry and toxicology of cigarettes, compared with older “low-speed-manufacture” adhesives (e.g. starch based).
Objective: This study was conducted to determine whether the inclusion of different levels of three adhesives (ethylene vinyl acetate, polyvinyl acetate and starch) in experimental cigarettes results in different smoke chemistry and toxicological responses in in vitro and in vivo assays.
Materials and methods: A battery of tests (analytical chemistry, in vitro and in vivo assays) was used to compare the chemistry and toxicology of smoke from experimental cigarettes made with different combinations of the three adhesives. Varying levels of the different side-seam adhesives, as well as the transfer of adhesives from packaging materials, were tested.
Results: There were differences in some mainstream cigarette smoke constituents as a function of the level of adhesive added to experimental cigarettes and between the tested adhesives. None of these differences translated into statistically significant differences in the in vitro or in vivo assays.
Conclusion: The use of newer “high-speed-manufacture” vinyl acetate-based adhesives in cigarettes does not produce toxicological profiles that prevent the adhesives from replacing the older “low-speed-manufacture” adhesives (such as starch).
Acknowledgements
The authors acknowledge the study directors at Philip Morris Research Laboratories. The authors acknowledge the editorial assistance of Eileen Y. Ivasauskas of Accuwrit Inc. The authors thank Lonnie T. Rimmer for his work in preparing the Supplemental Material available at http://informahealthcare.com/iht.
Supplementary material available online at:
http://informahealthcare.com/iht (Doi: 10.3109/08958378.2013.854430)