How important is drinking water exposure for the risks of engineered nanoparticles to consumers?

Abstract

This study explored the potential for engineered nanoparticles (ENPs) to contaminate the UK drinking water supplies and established the significance of the drinking water exposure route compared to other routes of human exposure. A review of the occurrence and quantities of ENPs in different product types on the UK market as well as release scenarios, their possible fate and behaviour in raw water and during drinking water treatment was performed. Based on the available data, all the ENPs which are likely to reach water sources were identified and categorized. Worst case concentrations of ENPs in raw water and treated drinking water, using a simple exposure model, were estimated and then qualitatively compared to available estimates for human exposure through other routes. A range of metal, metal oxide and organic-based ENPs were identified that have the potential to contaminate drinking waters. Worst case predicted concentrations in drinking waters were in the low- to sub-µg/l range and more realistic estimates were tens of ng/l or less. For the majority of product types, human exposure via drinking water was predicted to be less important than exposure via other routes. The exceptions were some clothing materials, paints and coatings and cleaning products containing Ag, Al, TiO₂, Fe₂O₃ ENPs and carbon-based materials.

• Concentration
• estimation
• human health
• market penetration
• nanomaterials
• release
• surface water
• waste water

Declaration of interest

The authors declare to have no competing financial interests. The authors gratefully acknowledge funding from the Department for Environment, Food and Rural Affairs (Defra) (Project: DWI 70/2/246). The views and interpretation expressed in this report are those of the authors, and do not necessarily represent views of DEFRA or DWI.

Supplementary material available online.

Supplementary Materials S1-S9