References
- AndrésCLozanoSAdenso-DíazBDisassembly sequence planning in a disassembly cell contextRobot Comput-Integr Manuf20072369069510.1016/j.rcim.2007.02.012
- BakalISAkcaliEEffects of random yield in remanufacturing with price-sensitive supply and demandProd Opns Mngt200615407420
- BufardiASakaraDGheorgheRKiritsisDXirouchakisPMultiple criteria decision aid for selecting the best product end of life scenarioInt J Comput Integr Manuf20031652653410.1080/0951192031000115859
- ChanJWKTongTKLMulti-criteria material selections and end-of-life product strategy: Grey relational analysis approachMater Des2007281539154610.1016/j.matdes.2006.02.016
- DongJArndtGA review of current research on disassembly sequence generation and computer aided design for disassemblyProc Inst Mech Eng Part B-J Eng Manuf200321729931210.1243/095440503321590479
- DongJGibsonPArndtGDisassembly sequence generation in recycling based on parts accessibility and end-of-life strategyProc Inst Mech Eng Part B-J Eng Manuf20072211079108510.1243/09544054JEM697
- Effting S (2006). Wizard manual-Introduction into programming of wizards in SimaPro 7. Version 1.2. PRé Consultants B. V.
- FeldmannKTrautnerSLohrmannHMelzerKComputer-based product structure analysis for technical goods regarding optimal end-of-life strategiesProc Inst Mech Eng Part B-J Eng Manuf200121568369310.1243/0954405011518610
- FeldmannKTrautnerSMeedtOInnovative disassembly strategies based on flexible partial destructive toolsAnnu Rev Control19992315916410.1016/S1367-5788(99)90079-2
- FergusonMEToktayLBThe effect of competition on recovery strategiesProd Opns Mngt200615351368
- FernándezEKalcsicsJNickelSRíos-MercadoRZA novel maximum dispersion territory design model arising in the implementation of the WEEE-directiveJ Opl Res Soc20106150351410.1057/jors.2009.70
- FlowersADLindermanKHazardous waste disposal: A waste-fuel blending approachProd Opns Mngt200312307319
- GalantucciLMPercocoGSpinaRAssembly and disassembly planning by using fuzzy logic & genetic algorithmsInt J Adv Robot Syst200416774
- GaoMZhouMCTangYIntelligent decision making in disassembly process based on fuzzy reasoning Petri netsIEEE Trans Syst Man Cybern Part B-Cybern2004342029203410.1109/TSMCB.2004.833331
- GonzálezBAdenso-DiazBA scatter search approach to the optimum disassembly sequence problemComput Opl Res2006331776179310.1016/j.cor.2004.11.018
- GungorAGuptaSMAn evaluation methodology for disassembly processesComput Ind Eng19973332933210.1016/S0360-8352(97)00104-6
- GungorAGuptaSMDisassembly sequence plan generation using a branch-and-bound algorithmInt J Prod Res20013948150910.1080/00207540010002838
- Jien CK (2008). Multi-criteria optimal process for recycling EOL laptops and its decision support system. MS thesis, Department of Resources Engineering, National Cheng Kung University, Taiwan, ROC.
- KarakayaliIEmir-FarinasHAkcaliEAn analysis of decentralized collection and processing of end-of-life productsJ Opns Mngt20072511611183
- KongarEGuptaSMA genetic algorithm for disassembly process planningProc SPIE20024569546210.1117/12.455264
- KongarEGuptaSMDisassembly to order system under uncertaintyInt J Mngt Sci200634550561
- KuoTCZhangHCHuangSHDisassembly analysis for electromechanical products: A graph-based heuristic approachInt J Prod Res200038993100710.1080/002075400188988
- LambertAJDDisassembly sequencing: A surveyInt J Prod Res2003413721375910.1080/0020754031000120078
- LambertAJDOptimizing disassembly processes subjected to sequence-dependent costComput Opl Res20073453655110.1016/j.cor.2005.03.012
- LambertAJDGuptaSMDemand-driven disassembly optimization for electronic products package reliabilityJ Electron Manuf20021112113510.1142/S0960313102000436
- LeeD-HXiroucharkisPA two-stage heuristic for disassembly scheduling with assembly product structureJ Opl Res Soc20045528729710.1057/palgrave.jors.2601690
- Lee SC (2006). Multi-criteria optimization for recycling process for EOL LCD type products. MS thesis, Department of Resources Engineering, National Cheng Kung University, Taiwan, ROC.
- LeeSGLyeSWKhooMKA multi-objective methodology for evaluating product end-of-life options and disassemblyInt J Adv Manuf Technol20011814815610.1007/s001700170086
- LiuZFLiuXPWangSWLiuGFRecycling strategy and a recyclability assessment model based on an artificial neural networkJ Mater Process Technol200212950050610.1016/S0924-0136(02)00625-8
- MazharMIKaraSKaebernickHRemaining life estimation of used components in consumer products: life cycle data analysis by Weibull and artificial neural networksJ Opns Mngt20072511841193
- MelnykSASroufeRPCalantoneRAssessing the impact of environmental management systems on corporate and environmental performanceJ Opns Mngt200321329351
- MergiasIMoustakasKPapadopoulosALoizidouMMulti-criteria decision aid approach for the selection of the best compromise management scheme for ELVs: The case of CyprusJ Hazard Mater200714770671710.1016/j.jhazmat.2007.01.071
- Navin-ChandraDThe recovery problem in product designJ Eng Des19945658610.1080/09544829408907873
- NeuendorfK-PLeeD-HKiritsisDXirouchakisPDisassembly scheduling with parts commonality using Petri nets with timestampsFundam Inform200147295306
- Pu P (1992). An assembly sequence generation algorithm using case-based search techniques. Proceedings of IEEE International Conference on Robotics and Automation, 12–14 May 1992, Vol. 3 pp 2425–2430, doi:10.1109/ROBOT.1992.220101.
- RaviVShankarRTiwanMKSelection of a reverse logistics project for end-of-life computers: ANP and goal programming approachInt J Prod Res2008464849487010.1080/00207540601115989
- Rosell J, Muñoz N and Gambin A (2003). Robot tasks sequence planning using Petri nets. Proceedings of the IEEE International Symposium on Assembly and Task Planning, 10–11 July 2003, pp 24–29, doi:10.1109/ISATP.2003.1217182.
- ShihLHChangYSLinYTIntelligent evaluation approach for electronic product recycling via case-based reasoningAdv Eng Inform20062013714510.1016/j.aei.2005.11.003
- ShihLHLeeSCOptimizing disassembly and recycling process for EOL LCD-type products: A heuristic methodIEEE Trans Electron Packag Manuf20073021322010.1109/TEPM.2007.901172
- StaikosTRahimifardSAn end-of-life decision support tool for product recovery considerations in the footwear industryInt J Comput Integr Manuf20072060261510.1080/09511920701416549
- SwaminathanABarberKSAn experience-based assembly sequence planner for mechanical assembliesIEEE Trans Robot Autom19961225226710.1109/70.488945
- TangYTurowskiMAdaptive fuzzy system for disassembly process planning with uncertaintyJ Chin Inst Chem Eng2007242029
- VeerakamolmalPGuptaSMA case-based reasoning approach for automating disassembly process planningJ Intell Manuf200213476010.1023/A:1013629013031
- WaterburyRDesigning parts for automated assemblyAssem Eng198524211217
- WebsterSMitraSCompetitive strategy in remanufacturing and the impact of take-back lawsJ Opns Mngt20072511231140
- WenLCA Study of Waste Recycling-and-treatment Fee Collection for Scrap Personal Computers2000
- YuPLLeitmannGCompromise solutions, domination structures and Salukvadze's solutionJ Optim Theory Appl19741336237810.1007/BF00934871
- ZussmanEKriwetASeligerGDisassembly-oriented assessment methodology to support design for recyclingCIRP Ann-Manuf Technol19944391410.1016/S0007-8506(07)62152-0