Electrochemical Characterization of the Corrosion of Mild Steel in Saline Following Mechanical Deformation

References

• Abdulwahab, M., and O. S. I. Fayomi. 2012. Corrosion inhibition of mild steel in Sesamum indicum–2 M HCl/H2SO4 interface. International Journal of Electrochemical Science 7:5805–16.
   Google Scholar
• Abioye, T. E., T. O. Olugbade, and T. I. Ogedengbe. 2017. Welding of dissimilar metals using gas metal arc and laser welding techniques: A review. Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS) 8:225–8.
   Google Scholar
• Abioye, T. E., I. S. Omotehinse, I. O. Oladele, T. O. Olugbade, and T. I. Ogedengbe. 2020. Effects of post-weld heat treatments on the microstructure, mechanical and corrosion properties of gas metal arc welded 304 stainless steel. World Journal of Engineering 17 (1):87–96. doi:10.1108/WJE-11-2019-0323.
   Web of Science ®Google Scholar
• Aghuy, A. A., M. Zakeri, M. H. Moayed, and M. Mazinani. 2015. Effect of grain size on pitting corrosion of 304L austenitic stainless steel. Corrosion Science 94:368–76. doi:10.1016/j.corsci.2015.02.024.
   Web of Science ®Google Scholar
• Bałkowiec, A., J. Michalski, H. Matysiak, and K. J. Kurzydlowski. 2011. Influence of grain boundaries misorientation angle on intergranular corrosion in 2024-T3 aluminium. Materials Science-Poland 29 (4):305–11. doi:10.2478/s13536-011-0050-4.
   Web of Science ®Google Scholar
• Balyanov, A., J. Kutnyakova, N. A. Amirkhanova, V. V. Stolyarov, R. Z. Valiev, X. Z. Liao, Y. H. Zhao, Y. B. Jiang, H. F. Xu, T. C. Lowe, et al. 2004. Corrosion resistance of ultra-fine-Grained Ti. Scripta Materialia. 51 (3):225–9. doi:10.1016/j.scriptamat.2004.04.011.
   Web of Science ®Google Scholar
• Barbucci, A., G. Farne, P. Matteazzi, R. Riccieri, and G. Cerisola. 1998. Corrosion behaviour of nanocrystalline Cu90Ni10 alloy in neutral solution containing chlorides. Corrosion Science 41 (3):463–75. doi:10.1016/S0010-938X(98)00129-2.
   Web of Science ®Google Scholar
• Bhadeshia, H., and R. Honeycombe. 2006. Steels: Microstructure and properties. New York: Elsevier.
   Google Scholar
• Bracke, L., K. Verbeken, L. Kestens, and J. Penning. 2009. Microstructure and texture evolution during cold rolling and annealing of a high Mn TWIP steel. Acta Materialia 57 (5):1512–24. doi:10.1016/j.actamat.2008.11.036.
   Web of Science ®Google Scholar
• Chen, C., W. Mingpu, W. Shan, J. Yanlin, Z. Bo, and X. Fuzhong. 2011. Evolution of dislocation microstructures in Ta–7.5%W alloy foils during cold-rolling. Acta Metallurgica Sinica 47:984–9.
   Web of Science ®Google Scholar
• Dang, C., T. O. Olugbade, S. Fan, H. Zhang, L. L. Gao, J. Li, and Y. Lu. 2018. Direct quantification of mechanical responses of TiSiN/Ag multilayer coatings through uniaxial compression of micropillars. Vacuum 156:310–6. doi:10.1016/j.vacuum.2018.07.048.
   Web of Science ®Google Scholar
• Dang, C., Y. Yao, T. O. Olugbade, J. Li, and L. Wang. 2018. Effect of multi-interfacial structure on fracture resistance of composite TiSiN/Ag/TiSiN multilayer coating. Thin Solid Films. 653:107–12. doi:10.1016/j.tsf.2018.03.029.
   Web of Science ®Google Scholar
• Durst, O., J. Ellermeier, and C. Berger. 2008. Influence of plasma-nitriding and surface roughness on the wear and corrosion resistance of thin films (PVD/PECVD). Surface and Coatings Technology 203 (5–7):848–54. doi:10.1016/j.surfcoat.2008.05.022.
   Web of Science ®Google Scholar
• Fayomi, O. S. I., I. G. Akande, O. O. Oluwole, and D. Daramola. 2018. Effect of water-soluble chitosan on the electrochemical corrosion behaviour of mild steel. Chemical Data Collections 17–18:321–6. doi:10.1016/j.cdc.2018.10.006.
   Google Scholar
• Fontana, M. G. 1987. Corrosion engineering. 3rd ed. New York: McGraw Hill.
   Google Scholar
• Gertsman, V. Y., and S. M. Bruemmer. 2001. Study of grain boundary character along intergranular stress corrosion crack paths in austenitic alloys. Acta Materialia 49 (9):1589–98. doi:10.1016/S1359-6454(01)00064-7.
   Web of Science ®Google Scholar
• Hilbert, L. R., D. Bagge-Ravn, J. Kold, and L. Gram. 2003. Influence of surface roughness of stainless steel on microbial adhesion and corrosion resistance. International Biodeterioration & Biodegradation 52 (3):175–85. doi:10.1016/S0964-8305(03)00104-5.
   Web of Science ®Google Scholar
• Lee, N. S., J. H. Chen, P. W. Kao, L. W. Chang, T. Y. Tseng, and J. R. Su. 2009. Anisotropic tensile ductility of cold-rolled and annealed aluminum alloy sheet and the beneficial effect of post-anneal rolling. Scripta Materialia 60 (5):340–3. doi:10.1016/j.scriptamat.2008.10.036.
   Web of Science ®Google Scholar
• Lehockey, E. M., A. M. Brennenstuhl, and I. Thompson. 2004. On the relationship between grain boundary connectivity, coincident site lattice boundaries, and intergranular stress corrosion cracking. Corrosion Science 46 (10):2383–404. doi:10.1016/j.corsci.2004.01.019.
   Web of Science ®Google Scholar
• Li, B. L., A. Godfrey, Q. C. Meng, Q. Liu, and N. Hansen. 2004. Microstructural evolution of IF-steel during cold rolling. Acta Materialia 52 (4):1069–81. doi:10.1016/j.actamat.2003.10.040.
   Web of Science ®Google Scholar
• Li, Y., F. Wang, and G. Liu. 2004. Grain size effect on the electrochemical corrosion behavior of surface nanocrystallized low-carbon steel. Corrosion 60 (10):891–6. doi:10.5006/1.3287822.
   Web of Science ®Google Scholar
• Luo, W., C. Qian, X. J. Wu, and M. Yan. 2007. Electrochemical corrosion behavior of nanocrystalline copper bulk. Materials Science and Engineering: A 452–453:524–8. doi:10.1016/j.msea.2006.10.123.
   Web of Science ®Google Scholar
• Malatji, N., A. P. I. Popoola, and O. S. I. Fayomi. 2017. The effect of nanoparticulate loading on the fabrication and characterization of multi-doped Zn–Al2O3–Cr2O3 hybrid coatings on mild steel. The International Journal of Advanced Manufacturing Technology 90 (9–12):2443–52. doi:10.1007/s00170-016-9525-0.
   Web of Science ®Google Scholar
• Mohammed, T., T. O. Olugbade, and I. Nwankwo. 2016. Determination of the effect of oil exploration on galvanized steel in Niger Delta, Nigeria. Journal of Scientific Research and Reports 10 (1):1–9. doi:10.9734/JSRR/2016/21053.
   Google Scholar
• Montheillet, F., J. J. Jonas, and M. Benferrah. 1991. Development of anisotropy during the cold rolling of aluminium sheet. International Journal of Mechanical Sciences 33 (3):197–209. doi:10.1016/0020-7403(91)90046-6.
   Web of Science ®Google Scholar
• Nasiri-Abarbekoh, H., A. Ekrami, A. A. Ziaei-Moayyed, and M. Shohani. 2012. Effects of rolling reduction on mechanical properties anisotropy of commercially pure titanium. Materials and Design 34:268–74. doi:10.1016/j.matdes.2011.06.024.
   Web of Science ®Google Scholar
• Olugbade, T. 2019. Datasets on the corrosion behaviour of nanostructured AISI 316 stainless steel treated by SMAT. Data in Brief 25:104033. doi:10.1016/j.dib.2019.104033.
   PubMed Web of Science ®Google Scholar
• Olugbade, T., C. Liu, and J. Lu. 2019. Enhanced passivation layer by Cr diffusion of 301 stainless steel facilitated by SMAT. Advanced Engineering Materials 21 (8):1900125. doi:10.1002/adem.201900125.
   Web of Science ®Google Scholar
• Olugbade, T., and J. Lu. 2018. Effects of materials modification on the mechanical and corrosion properties of AISI 316 stainless steel. Twelfth International Conference on Fatigue Damage of Structural Materials, Cape Cod, Hyannis.
   Google Scholar
• Olugbade, T., and J. Lu. 2019a. Enhanced corrosion properties of nanostructured 316 stainless steel in 0.6 M NaCl solution. Journal of Bio- and Tribo-Corrosion 5:38.
   Google Scholar
• Olugbade, T. O., and J. Lu. 2019b. Characterization of the corrosion of nanostructured 17-4 PH stainless steel by surface mechanical attrition treatment (SMAT). Analytical Letters 52 (16):2454–71. doi:10.1080/00032719.2019.1611842.
   Web of Science ®Google Scholar
• Olugbade, T. O., and J. Lu. 2020. Literature review on the mechanical properties of materials after surface mechanical attrition treatment (SMAT). Nano Materials Science 2 (1):3–31. doi:10.1016/j.nanoms.2020.04.002.
   Google Scholar
• Omotosho, O. A., O. O. Ajayi, O. S. Fayomi, and V. O. Ifepe. 2011. Assessing the deterioration behaviour of mild steel in 2 M sulphuric acid using Bambusa glauscescens. International Journal of Applied Science and Engineering Research, Dindigul 2:406–18.
   Google Scholar
• Osório, W. R., C. M. Freire, and A. Garcia. 2005. The role of macrostructural morphology and grain size on the corrosion resistance of Zn and Al castings. Materials Science and Engineering: A 402 (1–2):22–32. doi:10.1016/j.msea.2005.02.094.
   Web of Science ®Google Scholar
• Pan, Y., B. L. Adams, T. Olson, and N. Panayotou. 1996. Grain-boundary structure effects on intergranular stress corrosion cracking of alloy X-750. Acta Materialia 44 (12):4685–95. doi:10.1016/S1359-6454(96)00125-5.
   Web of Science ®Google Scholar
• Qin, L. Y., J. S. Lian, and Q. Jiang. 2010. Effect of grain size on corrosion behavior of electrodeposited bulk nanocrystalline Ni. Transactions of Nonferrous Metals Society of China 20 (1):82–9. doi:10.1016/S1003-6326(09)60101-1.
   Web of Science ®Google Scholar
• Ralston, K. D., and N. Birbilis. 2010. Effect of grain size on corrosion: A review. Corrosion 66 (7):075005–13. doi:10.5006/1.3462912.
   Web of Science ®Google Scholar
• Ralston, K. D., N. Birbilis, and C. H. J. Davies. 2010. Revealing the relationship between grain size and corrosion rate of metals. Scripta Materialia 63 (12):1201–4. doi:10.1016/j.scriptamat.2010.08.035.
   Web of Science ®Google Scholar
• Rashid, M. W. A., M. Gakim, Z. M. Rosli, and M. A. Azam. 2012. Formation of Cr23C6 during the sensitization of AISI, 304 stainless steel and its effect to pitting corrosion. International Journal of Electrochemical Science 7:9465–77.
   Web of Science ®Google Scholar
• Rofagha, R., R. Langer, A. M. El-Sherik, U. Erb, G. Palumbo, and K. T. Aust. 1991. The corrosion behaviour of nanocrystalline nickel. Scripta Metallurgica et Materialia 25 (12):2867–72. doi:10.1016/0956-716X(91)90171-V.
   Web of Science ®Google Scholar
• Di Schino, A. , and J. M. Kenny. 2002. Effects of the grain size on the corrosion behavior of refined AISI 304 austenitic stainless steels. Journal of Materials Science Letters 21 (20):1631–4. [Mismatch] doi:10.1023/A:1020338103964.
   Google Scholar
• Schultze, J. W., B. Davepon, F. Karman, C. Rosenkranz, A. Schreiber, and O. Voigt. 2004. Corrosion and passivation in nanoscopic and microscopic dimensions: The influence of grains and grain boundaries. Corrosion Engineering, Science and Technology 39 (1):45–52. doi:10.1179/147842204225016813.
   Web of Science ®Google Scholar
• Shimada, M., H. Kokawa, Z. Wang, Y. Sato, and I. Karibe. 2002. Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering. Acta Materialia 50 (9):2331–41. doi:10.1016/S1359-6454(02)00064-2.
   Web of Science ®Google Scholar
• Song, D., A. Ma, J. Jiang, P. Lin, and D. Yang. 2009. Corrosion behavior of ultra-fine grained industrial pure Al fabricated by ECAP. Transactions of the Nonferrous Metals Society of China 19 (5):1065–70. doi:10.1016/S1003-6326(08)60407-0.
   Web of Science ®Google Scholar
• Tiwari, S. K., M. Tripathi, and R. Singh. 2012. Electrochemical behavior of zirconia based coatings on mild steel prepared by sol–gel method. Corrosion Science 63:334–41. doi:10.1016/j.corsci.2012.06.026.
   Web of Science ®Google Scholar
• Toribio, J. 1998. Residual stress effects in stress-corrosion cracking. Journal of Materials Engineering and Performance 7 (2):173–82. doi:10.1361/105994998770347891.
   Web of Science ®Google Scholar
• Walter, R., and M. B. Kannan. 2011. Influence of surface roughness on the corrosion behaviour of magnesium alloy. Materials & Design 32 (4):2350–4. doi:10.1016/j.matdes.2010.12.016.
   Web of Science ®Google Scholar
• Wang, S., C. Chen, Y. L. Jia, M. P. Wang, Z. Li, and Y. C. Wu. 2016. Evolution of deformation microstructures of cold-rolled Ta–2.5W alloy with coarse grains at low to medium strains. International Journal of Refractory Metals and Hard Materials 54:104–15. doi:10.1016/j.ijrmhm.2015.07.023.
   Web of Science ®Google Scholar
• Wronski, S., M. Wrobel, A. Baczmanski, and K. Wierzbanowski. 2013. Effects of cross-rolling on residual stress, texture and plastic anisotropy in f.c.c. and b.c.c. metals. Materials Characterization 77 (1):116–26. doi:10.1016/j.matchar.2013.01.005.
   Web of Science ®Google Scholar
• Zhu, Z. S., J. L. Gu, N. P. Liu, N. P. Chen, and M. G. Yan. 2000. Variant selection and its effect on phase transformation textures in cold rolled titanium sheet. Materials Science and Engineering: A 280 (1):199–203. doi:10.1016/S0921-5093(99)00666-8.
   Web of Science ®Google Scholar
• Zu, H., K. Chau, T. O. Olugbade, L. Pan, D. H. Chow, L. Huang, L. Zheng, W. Tong, X. Li, Z. Chen, et al. 2020. Comparison of modified injection molding and conventional machining in biodegradable behavior of perforated cannulated magnesium hip stents. Journal of Materials Science and Technology. doi.org/10.1016/j.jmst.2020.02.057.
   Web of Science ®Google Scholar