References
- Alefeld, G., and G. Mayer. 2000. “Interval Analysis: Theory and Applications.” Journal of Computational and Applied Mathematics 121 (1–2): 421–464. doi: 10.1016/S0377-0427(00)00342-3
- Australian Building Codes Board. 2010. Energy Efficency Provisions for BCA 2010 Volume Two – Information Handbook. Vol. 2. Canberra: Australian Building Codes Board.
- BITRE. 2009. “Greenhouse Gas Emissions from Australian Transport: Projections to 2020.” Working Paper 73. Canberra: Bureau of Infrastructure, Transport and Regional Economics.
- BITRE. 2011. “Population Growth, Jobs Growth and Commuting Flows in Melbourne.” Report 125. Canberra, Melbourne: BITRE.
- van de Coevering, P., and T. Schwanen. 2006. “Re-Evaluating the Impact of Urban Form on Travel Patterns in Europe and North-America.” Transport Policy 13 (3): 229–239. doi: 10.1016/j.tranpol.2005.10.001
- Crawford, R. H. 2008. “Validation of a Hybrid Life-Cycle Inventory Analysis Method.” Journal of Environmental Management 88 (3): 496–506. doi: 10.1016/j.jenvman.2007.03.024
- Crawford, R. H. 2011. Life Cycle Assessment in the Built Environment. London: Spon Press.
- Department of Climate Change and Energy Efficiency. 2011. National Greenhouse Accounts Factors. Canberra: Commonwealth of Australia.
- DEWHA. 2008. Energy Use in the Australian Residential Sector 1986–2020. Canberra: Department of the Environment, Water, Heritage and the Arts.
- European Parliament and the Council of the European Union. 2002. Directive 2002/91/EC of the European Parliament and the Council of 16 December 2002 on the Energy Performance of Buildings. Brussels: Official Journal of the European Communities.
- Fuller, R., and R. Crawford. 2011. “Impact of Past and Future Residential Housing Development Patterns on Energy Demand and Related Emissions.” Journal of Housing and the Built Environment 26 (2): 165–183. doi: 10.1007/s10901-011-9212-2
- Gustavsson, L., and A. Joelsson. 2010. “Life Cycle Primary Energy Analysis of Residential Buildings.” Energy and Buildings 42 (2): 210–220. doi: 10.1016/j.enbuild.2009.08.017
- Heijnungs, R., and M. Huijbregts. 2004. “A Review of Approaches to Treat Uncertainty in LCA.” In 2nd Biennial Meeting of the International Environmental Modelling and Software Society, edited by C. Pahl-Wostl, S. Schmidt, A. E. Rizzoli, and A. J. Jakeman, 332–339. Osnabrück, Germany: iEMSs.
- IBGE. 2010. Bilan énergétique de la région de Bruxelles-Capitale 2008. Brussels: Institut Bruxellois pour la Gestion de l'Environnement.
- IEA. 2011. World Energy Outlook 2011. Paris: International Energy Agency.
- Jenks, M., K. Williams, and E. Burton. 2000. Achieving Sustainable Urban Form. London: E & FN Spon.
- Lenzen, M. 1999. “Total Requirements of Energy and Greenhouse Gases for Australian Transport.” Transportation Research Part D-Transport and Environment 4 (4): 265–290. doi: 10.1016/S1361-9209(99)00009-7
- Meteotest. 2009. Meteonorm 6.0. Computer software. Bern.
- Moore, R. E., R. B. Kearfott, and M. J. Cloud. 2009. Introduction to Interval Analysis. Philadelphia, PA: Society for Industrial and Applied Mathematics.
- NAHB, and Bank of America. 2007. Study of Life Expectancy of Home Materials, edited by J. Jackson, 1–15. Washington, DC: National Association of Home Builders.
- Newman, P., and J. R. Kenworthy. 1999. Sustainability and Cities: Overcoming Automobile Dependence. Washington, DC: Island Press.
- Newman, P., and J. R. Kenworthy. 2000. “Sustainable Urban Form: The Big Picture.” In Achieving Sustainable Urban Form, edited by M. Jenks, K. Williams, and E. Burton, 109–120. London: E & FN Spon.
- Newton, P. 2000. “Urban Form and Environmental Performance.” In Achieving Sustainable Urban Form, edited by M. Jenks, K. Williams, and E. Burton, 46–53. London: E & FN Spon.
- Norman, J., H. L. MacLean, and C. A. Kennedy. 2006. “Comparing High and Low Residential Density: Life Cycle Analysis of Energy Use and Greenhouse Gas Emissions.” Journal of Urban Planning and Development 132 (1): 10–21. doi: 10.1061/(ASCE)0733-9488(2006)132:1(10)
- Perez-Lombard, L., J. Ortiz, and C. Pout. 2008. “A Review on Buildings Energy Consumption Information.” Energy and Buildings 40 (3): 394–398. doi: 10.1016/j.enbuild.2007.03.007
- Pettersen, T. D. 1994. “Variation of Energy-Consumption in Dwellings Due to Climate, Building and Inhabitants.” Energy and Buildings 21 (3): 209–218. doi: 10.1016/0378-7788(94)90036-1
- Pullen, S. 2009. “Towards a More Holistic and Complementary Approach to Modelling Energy Consumption in Buildings.” In Sustainability in Energy and Buildings, edited by R. Howlett, L. Jain, and S. Lee, 325–337. Springer: Berlin.
- Python Software Foundation. 2012. “Python Programming Language – Official Website.” Accessed June 26, 2012. http://www.python.org/
- Stephan, A. 2013. “Towards a Comprehensive Energy Assessment of Residential Buildings. A Multi-Scale Life Cycle Energy Analysis Framework.” PhD thesis, ULB-BATir – Building, Architecture and Town Planning – and UoM-ABP – Architecture, Building and Planning, Université Libre de Bruxelles and The University of Melbourne, Brussels.
- Stephan, A., R. H. Crawford, and K. de Myttenaere. 2011. “Towards a More Holistic Approach to Reducing the Energy Demand of Dwellings.” Procedia Engineering 21 (0): 1033–1041. doi: 10.1016/j.proeng.2011.11.2109
- Topouzi, M. 2011. “The Effect of ‘Default User’ Inputs in Modelling Tools and Methods in Energy Use.” Proceedings of 27th international conference on passive and low-energy architecture, Louvain-la-Neuve, July 15, 2011.
- Treloar, G. J. 1997. “Extracting Embodied Energy Paths From Input–Output Tables: Towards an Input–Output-Based Hybrid Energy Analysis Method.” Economic Systems Research 9 (4): 375–391. doi: 10.1080/09535319700000032
- Treloar, G. J. 1998. “A Comprehensive Embodied Energy Analysis Framework.” PhD thesis, School of Architecture and Building, Deakin University, Geelong.
- Treloar, G. J., and R. H. Crawford. 2010. Database of Embodied Energy and Water Values for Materials. Melbourne: The University of Melbourne.
- Winistorfer, P., Z. Chen, B. Lippke, and N. Stevens. 2007. “Energy Consumption and Greenhouse Gas Emissions Related to the Use, Maintenance, and Disposal of a Residential Structure.” Wood and Fiber Science 37 (Special Issue): 128–139.