Design and fabrication of smooth poly-hypar timber gridshells

References

• Aimond, Ferdinand. 1933. “Thin Shell Roofs in the Form of a Hyperbolic Paraboloid.” Le Génie CIvil 52 (8).
   Google Scholar
• Akbarzadeh, Masoud, Tom Van Mele, and Philippe Block. 2015. “3D Graphic Statics: Geometric Construction of Global Equilibrium.” Paper presented at the IASS 2015 Amsterdam Symposium, Amsterdam.
   Google Scholar
• Apeland, Kristoffer. 1962. “On the Analysis the Bending Stress in Shallow Hyperbolic Paraboloidal Shells.” Paper presented at the Proceeding of World Conference on Shell Structures, San Francisco.
   Google Scholar
• Bechthold, Martin. 2008. Innovative Surface Structures-Technologies and Applications. Vol. 2. Abingdon: Taylor&Francis.
   Google Scholar
• Billington, David P. 1965. Thin Shell Concrete Structures. New York: McGRAW-HILL Book.
   Google Scholar
• Blanco, Federico L. del. 2021. “Virtual Reconstruction and Geometric Analysis of Félix Candela’s Inverted Umbrellas for the Villahermosa Cathedral.” Disegnarecon 14 (27). doi:10.20365/disegnarecon.27.2021.10.
   Web of Science ®Google Scholar
• Candela, Felix. 1951. “Structural Application of Hyperbolic Paraboloidical Shell.” Journal of the American Concrete Institute 51 (20): 397–415.
   Google Scholar
• Candela, Felix. 1957. “General Formulas for Membrane Stress in Hyperbolic Paraboloidical Shells.” Journal of the American Concrete Institute 57 (16): 353–362.
   Google Scholar
• Cao, Ting. 2019. Smooth Poly-Hypar Surface Structures. Zurich: ETH Zurich.
   Google Scholar
• Cao, Ting, Pierluigi D’Acunto, Juan Jose Castellon, Alessandro Tellini, Joseph Schwartz, and Hong Zhng. 2021. “Design of Prestressed Gridshells as Smooth Poly-Hypar Surface Structures, 30.”
   Google Scholar
• Cremona, Luigi. 1890. Polygon of Forces and Funicular Polygon as Reciprocal Figures in Graphic Statics. Oxford: Oxford University Press.
   Google Scholar
• Culmann, Carl. 1866. “Die graphische Statik: Meyer und Zeller.”
   Google Scholar
• D′Acunto, Pierluigi, Jean-Philippe Jasienski, Patrick Ole Ohlbrock, Corentin Fivet, Joseph Schwartz, and Denis Zastavni. 2019. “Vector- Based 3D Graphic Statics: A Framework for the Design of Spatial Structures Based on the Relation Between Form and Forces.” International Journal of Solids and Structures 167: 58–70. doi:10.1016/j.ijsolstr.2019.02.008
   Web of Science ®Google Scholar
• Domingo, Alberto, Carlos Lázaro, and P. Serna. 1999. “Design of a Thin Shell Steel Fiber Reinforced Concrete Hypar Roof, Madrid.”
   Google Scholar
• Edward, Allen, and Zalewski Wacław. 2010. Form and Forces: Designing Efficient, Expressive Structures. Hoboken: Wiley.
   Google Scholar
• Flöry, Simon, Yukie Nagai, Florin Isvoranu, Helmut Pottmann, and Johannes Wallner. 2013. “Ruled Free Forms.” In Advances in Architectural Geometry 2012, 57–66. Vienna: Springer.
   Google Scholar
• Grande, Ernesto, Maura Imbimbo, and Valentina Tomei. 2020. “Optimization Strategies for Grid Shells: The Role of Joints.” Journal of Architectural Engineering 26 (1): 04019028. doi:10.1061/(ASCE)AE.1943-5568.0000375
   Web of Science ®Google Scholar
• Happold, Edmund, and Wl Liddell. 1975. “Timber Lattice Roof for the Mannheim Bundesgartenschau.” Structural Engineering 53 (3): 99–135.
   Google Scholar
• Harris, Richard, John Romer, Oliver Kelly, and Stephen Johnson. 2003. “Design and Construction of the Downland Gridshell.” Building Research & Information 31 (6): 427–454. doi:10.1080/0961321032000088007
   Web of Science ®Google Scholar
• Harris, Richard, and Jonathan Roynon. 2008, July 2–5. “The Savill Garden Gridshell: Design and Construction.” Paper presented at 10th World Conference of Timber Engineering, Miyazaki, Japan.
   Google Scholar
• Huhnen-Venedey, Emanuel, and Thilo Rörig. 2014. “Discretization of Asymptotic Line Parametrizations Using.” Geometry Dedicata 2014 (168): 265–289. doi:10.1007/s10711-013-9830-9
   Google Scholar
• Konstantatou, Marina, and F. A. Mcrobie. 2017. “3D Graphic Statics and Graphic Kinematics for Spatial Structures, Hamburg.”
   Google Scholar
• Maxwell, James Clerk. 1864. “On Reciprocal Figures, Frames and Diagrams of Forces.” Philosophical Magazine 250 (61): 27.
   Google Scholar
• Mueller, G. 1977. Nonlinear Analysis of Reinforced Concrete Hyperbolic Paraboloid Shells. Berkeley: Department of Civil Engineering,University of California.
   Google Scholar
• Muttoni, Muttoni, Joseph Schwartz, and Bruo Thürlimann. 1997. Design of Concrete Structures with Stress Fields. Basel: Birkhäuser.
   Google Scholar
• Parme, Alfred L. 1956. “Hyperbolic Paraboloids and Other Shells of Double Curvature.” Structural Division 82 (5): 1–32.
   Google Scholar
• Piker, Daniel. 2013. “Kangaroo: Form Finding with Computational Physics.” Architectural Design 83 (2): 136–137. doi:10.1002/ad.1569
   Web of Science ®Google Scholar
• Quinn, Gregory, and Christoph Gengnagel. 2014. “A Review of Elastic Grid Shells, Their Erection Methods and the Potential use of Pneumatic Formwork.” Mobile and Rapidly Assembled Structures 136-151: 129. doi:10.2495/MAR140111
   Google Scholar
• Ramaswamy, Guruvayur Subramanian. 1968. Design and Construction of Concrete Shell Roofs. New York: McGraw-Hill.
   Google Scholar
• Schnobrich, William Courtney. 1971. “Analysis of Hyperbolic Paraboloid Shells.” Concrete Thin Shells ACI Special Publication P-28: 275–312.
   Google Scholar
• Schnobrich, William Courtney. 1988a. “Hyperbolic Paraboloid Shell Structures.” In Hyperbolic Paraboloid Shells: State of the Art, edited by Jack Christiansen, 1–15. Detroit: American Concrete Institute.
   Google Scholar
• Schnobrich, William Courtney. 1988b. “Bending Theory.” In Hyperbolic Paraboloid Shells: State of the Art, edited by Jack Christiansen, 5. Michigan: American Concrete Institute.
   Google Scholar
• Scordelis, Alexander C., H. D. Ramirez, and D. Ngo. 1969. “Membrane Stresses in Hyperbolic Paraboloid Shells Having a Parallelogram Shape In Plan.” ACI Journal 66 (87): 994–1000.
   Google Scholar
• Scordelis, Alexander C., H. D. Ramirez, and D. Ngo. 1970. “Membrane Stresses in Hyperbolic Paraboloid Shells Having an Arbitrary Quadrilateral Shape in Plan.” ACI Journal 67 (4): 994–1000.
   Google Scholar
• Simmonds, Tristan, Martin Self, and Daniel Bosia. 2006. “Woven Surface and Form.” Architectural Design 76 (6): 82–85. doi:10.1002/ad.366
   Google Scholar
• Tomei, Valentina, Ernesto Grande, and Maura Imbimbo. 2021. “Influence of Geometric Imperfections on the Efficacy of Optimization Approaches for Grid-Shells.” Engineering Structures 228: 11502. doi:10.1016/j.engstruct.2020.111502.
   Web of Science ®Google Scholar