REFERENCES
- Elkraft System and Eltra, “Wind turbines Connected to Grids with Voltages above 100 kV—Technical regulation for the properties and the regulation of wind turbines. Regulation TF 3.2.5,” November 2004.
- V. Spudić, M. Jelavić, M. Baotić, M. Vašak, and N. Perić, “Aeolus Deliverable 3.3. Reconfigurable Control Extension,” project report, University of Zagreb, Faculty of Electrical Engineering and Computing, 2010.
- A. D. Hansen, P. Sørensen, F. Iov, and F. Blaabjerg, “Centralized power control of wind farm with doubly fed induction generators,” Renewable Energy, vol. 31, pp. 935—951, 2006.
- P. Sørensen, A. D. Hansen, K. Thomsen, T. Buhl, P. E. Morhorst, L. H. Nielsen, F. Iov, F. Blaabjerg, H. A. Nielsen, H. Madsen, and M. H. Donovan, “Operation and control of large wind turbines and wind farms—Final report,” Tech. Rep. Risø-R-1532(EN), Risø National Laboratory, 2005.
- T. Burton, D. Sharpe, N. Jenkins, and E. Bossanyi, Wind Energy Handbook. John Wiley & Sons, 2001.
- M. Soltani, T. Knudsen, J. Grunnet, and T. Bak, “Aeolus toolbox for dynamic wind farm model, simulation, and control,” in European Wind Energy Conference, (Krakow, Poland), April 2010.
- J. Jonkman, S. Butterfield, W. Musial, and G. Scott, “Definition of a 5-MW Reference Wind Turbine for Offshore System Development,” tech. rep., National Renewable Energy Laboratory, 2009.
- M. Jelavić, N. Perić, and I. Petrović, “Damping of wind turbine tower oscillations through rotor speed control,” in Ecologic Vehicles and Renewable Energies International Exhibition and Conference—EVER, (Monaco), 2007.
- L. H. Hansen, L. Helle, F. Blaabjerg, E. Ritchie, S. Munk-Nielsen, H. Bindner, P. Sørensen, and B. Bak-Jensen, “Conceptual Survey of Generators and Power Electronics for Wind Turbines,” Tech. Rep. Risø-R-1205(EN), Risø, DTU, Roskilde, Denmark, 2001.
- K. Z. Østergaard, P. Brath, and J. Stoustrup, “Estimation of effective wind speed,” Journal of Physics: Conference Series, vol. 75, 2007.
- J. Sutherland, “On the fatigue analysis of wind turbines,” tech. rep., Sandia National Laboratories, Albuquerque, New Mexico, USA, 1999.
- T. van Engelen, H. Markou, T. Buhl, and B. Marrant, “Morphological study of aeroelastic control concepts for wind turbines,” tech. rep., STABCON project (ENK5-CT-2002-000627) Task-7 Report, May 2007.
- E. A. Bossanyi, GH Bladed Theory Manual. Garrad Hassan and Partners Ltd, 11 ed., July 2003.
- E. A. Bossanyi, “Individual blade pitch control for load reduction,” Wind Energy, vol. 6, pp. 119–128, 2003.
- E. A. Bossanyi, “Further load reductions with individual pitch control,” Wind Energy, vol. 8, pp. 481–485, 2005.
- G. Freebury and W. Musial, “Determining equivalent damage loading for full-scale wind turbine blade fatigue tests,” in 19th American Society of Mechanical Engineers (ASME) Wind Energy Symposium, (Reno, Nevada), January 2000.
- M. Buhl, “NWTC Design Codes (MCrunch).” http://wind.nrel.gov/designcodes/postprocessors/mcrunch/, 2010. Last modified 25-October-2010; Accessed 02-November-2010.
- C. J. Spruce, Simulation and Control of Windfarms. Phd thesis, University of Oxford, 1993.
- F. Borrelli, M. Baotić, A. Bemporad, and M. Morari, “Dynamic programming for constrained optimal control of discrete-time linear hybrid systems,” Automatica, vol. 41, no. 10, pp. 1709–1721,2005.
- J. M. Maciejowski, Predictive Control with Constraints. Pearson Education Limited, Essex, 2002.