References
- A. Al Askandarani, M. S. J. Hashmi and B. S. Yilbas: ‘Coating produced by deposition of nanoparticles blended wires', AIP Conf. Proceed., 2010, 1315, 1383–1388. AMPT 2010, Advances in Materials and Processing Technologies Conference, October 24th to 27th, 2010 in Paris, France.
- N-G. Sun, S-G. Liu, Y-S. Xu, Q. Zhao, L-M. Luo and J. Li: ‘Microstructure and properties of FeNiTi/Cr3C2 coatings containing nano-TiC powder prepared by high velocity arc spraying’, Trans. Mater. Heat Treat., 2009, 30, (5), 201–204.
- K. Ma, D. Sun, Z. Xuan and J. Lu: ‘Microstructure and interface analysis of aluminum coating sprayed by electro-arc spraying on AZ91D magnesium alloy’, Trans. China Weld. Inst., 2008, 29, (12), 89–92.
- J-B. Cheng, X-B. Liang, B-S. Xu and Y-X. Wu: ‘Microstructure and wear properties of nanostructured coatings prepared by wire arc spray’, Tribology, 2009, 29, (6), 600–605.
- K. Bobzin, F. Ernst, J. Zwick, T. Schlaefer, D. Cook, K. Nassenstein, A. Schwenk, F. Schreiber, T. Wenz, G. Flores and M. Hahn: ‘Coating bores of light metal engine blocks with a nanocomposite material using the plasma transferred wire arc thermal spray process', J. Therm. Spray Techn., 2008, 17, (3), 344–351. doi: 10.1007/s11666-008-9188-y
- C. R. C. Lima, R. Libardi, F. Camargo, H. C. Fals and V. A. Ferraresi: ‘Assessment of abrasive wear of nanostructured WC-Co and Fe-based coatings applied by HP-hVOF, flame, and wire arc spray’, J. Therm. Spray Techn., 2014, 23, (7), 1097–1104. doi: 10.1007/s11666-014-0101-6
- M. Tuiprae, S. Wirojanupatump and S. Jiansirisomboon: ‘Characteristics of in-flight particles and splats thermally sprayed by using conventional and nano-composite cored wires’, Adv. Mater. Res., 2011, 160–162, 1724–1731. doi: 10.4028/www.scientific.net/AMR.160-162.1724
- C. Leither, J. Risan, M. Bashirzadeh and F. Azarmi: ‘Determination of the elastic modulus of wire arc sprayed alloy 625 using experimental, analytical, and numerical simulations’, Surf. Coat. Tech., 2013, 235, 611–619. doi: 10.1016/j.surfcoat.2013.08.033
- B-Y. Fu, D-Y. He, J-M. Jiang and X-Y. Li: ‘Microstructure and properties of arc sprayed nanocrystalline coating’, Trans. Mater. Heat Treat., 2010, 31, (1), 142–145.
- R. K. Guduru, V. Varadaraajan, A. D. Roche and P. S. Mohanty: ‘Nano particle embedded high temperature FGM coatings by hybrid spray process’, Proceedings of the International Thermal Spray Conference (ITSC 2009), p 420– 425, May 4–7, 2009.
- M. Hahn and A. Fischer: ‘Characterization of thermally sprayed micro- and nanocrystalline cylinder wall coatings by means of a cavitation test’, Proc. Inst. Mech. Eng. Part J: J. Eng. Tribol., 2009, 223, (1), 27–37. doi: 10.1243/13506501JET420
- B. S. Yilbas, B. Bhushan, B. S. Abdul Aleem and A. Al Askandarani: ‘Coatings by arc spraying of nanocrystalline metallic wires on carbon steel surfaces: surface hardness, hydrophobicity, and residual stress’, Can. Metall. Quart., 2016 54, (4), 415–423. doi:http://dx.doi.org/10.1179/1879139515Y.0000000010.
- www.praxair.com/praxair.nsf/, 2016.
- http://tatiscia.com/attachments/131_1.9.1.2-95MXC%20-%20UltraHard%20.pdf, 2016.
- http://www.praxairsurfacetechnologies.com/na/us/pst/pst.nsf/0/2744D217B4915D1485257AB1004F80B4/$file/140+MXC.pdf, 2016.
- M. J. Marques, J. Pina, A. M. Dias, J. L. Lebrun and J. Feugeas: ‘X-ray diffraction characterization of ion-implanted austenitic stainless steel’, Surf. Coat. Techn., 2005, 195, 8–16. doi: 10.1016/j.surfcoat.2004.06.005
- R. H. U. Khan, A. L. Yerokhin, T. Pilkington, A. Leyland and A. Matthews: ‘Residual stress in plasma electrolytic oxidation coatings on Al alloy produced by pulsed unipolar current’, Surf. Coat. Techn., 2005, 200, 1580–1586. doi: 10.1016/j.surfcoat.2005.08.092
- http://www.engineersedge.com/manufacturing_spec/properties_of_metals_strength.htm, 2016.
- P. Miao, G. R. Odette, J. Gould, J. Bernath, R. Miller, M. Alinger and C. Zanis: ‘The microstructure and strength properties of MA957 nanostructured ferritic alloy joints produced by friction stir and electro-spark deposition welding’, J. Nuclear Mater., 2007, 367–370, 1197–1202. doi: 10.1016/j.jnucmat.2007.03.232
- Y. A. Al-Shehri, M. S. J. Hashmi and B. S. Yilbas: ‘Hvof coating of diamalloy 2002 and 4010 on carbon steel sheets: microstructure examination’, AMPT 2009, Kuala Lumpur, Malaysia, 26–29 October 2009, Adv. Mater. Res., 2011, 264–265, 1482–1486. doi: 10.4028/www.scientific.net/AMR.264-265.1482
- M. R. Stoudt, J. B. Hubbard, S. P. Mates and D. E. Green: ‘Evaluating the relationships between surface roughness and friction behavior during metal forming’, SAE Trans. J. Mater. Manu, 2006, 114–115, 183–190.