References
- M. E. Schlesinger: ‘Al recycling’, Chap. 4, ‘Aluminum recycling economics', Vol. 44; 2006, Boca Raton, CRC Press.
- D. Doutre: Novelis Global Technology Center, Kingston, ON, Canada, personal communication, 5 December 2006.
- S. A. Argyropoulos, A. C. Mikrovas and D. Doutre: ‘Dimensionless correlations for forced convection in liquid metals, part I: single phase flow’, Metall. Mater. Trans. B, 2001, 32B, 239–246. doi: 10.1007/s11663-001-0047-1
- S. A. Argyropoulos, D. Mazumdar, A. C. Mikrovas and D. Doutre: ‘Dimensionless correlations for forced convection in liquid metals, part II: two phase flow’, Metall. Mater. Trans. B, 2001, 32B, 247–252. doi: 10.1007/s11663-001-0048-0
- A. D. Brent, V. R. Voller and K. J. Reid: ‘Enthalpy porosity technique for modeling convection-diffusion phase change: application to the melting of a pure metal’, Numer. Heat Transf. A, 1988, 13, 297–318.
- K. C. Mills: ‘Recommended values of thermophysical properties for selected commercial alloys'; 2002, Materials Park, OH, ASM International.
- M. Sukhram and S. A. Argyropoulos: ‘Solidification and melting of aluminum onto circular cylinders under forced convection, experimental measurements and numerical modeling’, Metall. Mater. Trans. B, 2014, 45B, 1723–1738. doi: 10.1007/s11663-014-0114-z
- S. A. Argyropoulos, N. J. Goudie and M. Trovant: ‘The estimation of thermal resistance at various interface’, in ‘Proceedings of the International Symposium in Fluid Flow Phenomena in Metals Processing’ (ed. N. El-Kaddah et. al.), 535–542; 1999, TMS Annual Meeting.
- ANSYS Inc.: ‘ANSYS Meshing User’s Guide’, Canonsburg, PA, November 2011.
- S. V. Patankar: ‘Numerical heat transfer and fluid flow’, 1980, New York, Hemisphere Publishing.
- ANSYS Inc.: ‘ANSYS FLUENT Theory Guide’, Canonsburg, PA, November 2011.
- S. A. Argyropoulos and Z. Li: ‘Kinetics of assimilation of additions in liquid metals' in ‘Treatise on process metallurgy’, Vol. 2, ‘Process Phenomena’, (ed. S. Seetharaman et al.) 359–426; 2014, Amsterdam, Elsevier Limited.
- B. Coates and S. A. Argyropoulos: ‘The effects of surface roughness and metal temperature on the heat transfer coefficient at the metal mold interface’, Metall. Mater. Trans. B, 2007, 38B, 243–255. doi: 10.1007/s11663-007-9020-y
- S. A. Argyropoulos and H. Carletti: ‘Comparisons of the effects of air and helium on heat transfer at the metal-mold interface’, Metall. Mater. Trans. B, 2008, 39B, 457–468. doi: 10.1007/s11663-008-9143-9
- S. Freti, J. D. Bornand and K. Buxmann: ‘Metallurgy of dross formation on Al melts', in ‘Light metals’, (ed. J. E. Andersen), 1003–1016; 1982, Dallas, TX, Metallurgical Society of AIME.