Functionally graded nickel–tungsten coating: electrodeposition, corrosion and wear behaviour

References

• A. Hadipour and S. Monirvaghefi: ‘Comparison of H-Cr single layer and Ni-P/H-Cr duplex coating’, Surf. Eng., 2015, 31, (9), 666–672. doi: 10.1179/1743294415Y.0000000007.
   Web of Science ®Google Scholar
• Y. Wang, M. Kang, S. Jin, X. Fu and X. Wang: ‘Electrochemical behaviour in process of electrodeposition Ni-P alloy coating’, Surf. Eng., 2014, 30, (8), 557–561. doi: 10.1179/1743294414Y.0000000291
   Web of Science ®Google Scholar
• A. Sharma, Y. Jang and J. Jung: ‘Effect of current density on morphology of electroplated tin’, Surf. Eng., 2015, 31, (6), 458–464. doi: 10.1179/1743294414Y.0000000427.
   Web of Science ®Google Scholar
• M. Pujari, A. Agarwal, R. Uppaluri and A. Verma: ‘Effect of Pd concentration on electroless dense Pd-PSS membrane fabrication’, Surf. Eng., 2015, 31, (3), 209–213. doi: 10.1179/1743294414Y.0000000360
   Web of Science ®Google Scholar
• C.-H. Wu, F.-Y. Hung, T.-S. Lui and L.-H. Chen: ‘Electrochemical performance of Ag doped Al0.6Si0.4/Al thin film anodes’, Surf. Eng., 2015, 31, (3), 173–178. doi: 10.1179/1743294414Y.0000000314
   Web of Science ®Google Scholar
• C. Subramanian, G. Cavallaro and G. Winkelman: ‘Wear maps for titanium nitride coatings deposited on copper and brass with electroless nickel interlayers’, Wear, 2000, 241, (2), 228–233. doi: 10.1016/S0043-1648(00)00380-X
   Web of Science ®Google Scholar
• D. S. Rickerby and A. Matthews: ‘Advanced surface coatings: a handbook of surface engineering’; 1991, Blackie, Chapman and Hall.
   Google Scholar
• D. Landolt: ‘Electrochemical and materials science aspects of alloy deposition’, Electrochim. Acta, 1994, 39, (8), 1075–1090. doi: 10.1016/0013-4686(94)E0022-R
   Web of Science ®Google Scholar
• D. Landolt: ‘Fundamental aspects of alloy plating’, Plat. Surf. Finish., 2001, 88, (9), 70–79.
   Google Scholar
• A. O. Gezerman and B. Çorbacioglu: ‘Development of alternative environment friendly nickel and gold plating baths’, Surf. Eng., 2015, 31, (9), 641–649. doi: 10.1179/1743294415Y.0000000025.
   Google Scholar
• M. Li, G. Wei, M. Li, J. Wang, L. Chen and X. Zhao: ‘Effect of HEDP on copper electroplating from non-cyanide alkaline baths’, Surf. Eng., 2014, 30, (10), 728–734. doi: 10.1179/1743294414Y.0000000256
   Web of Science ®Google Scholar
• R. Katirci: ‘Effects of ZnO and NaOH in Zn-Ni bath’, Surf. Eng., 2015, 31, (1), 11–16. doi: 10.1179/1743294414Y.0000000341
   Web of Science ®Google Scholar
• M. Zemanová, M. Krivosudská, M. Chovancová and V. Jorík: ‘Pulse current electrodeposition and corrosion properties of Ni–W alloy coatings’, J. Appl. Electrochem., 2011, 41, (9), 1077–1085. doi: 10.1007/s10800-011-0331-y
   Web of Science ®Google Scholar
• M. Chandrasekar and M. Pushpavanam: ‘Pulse and pulse reverse plating—conceptual, advantages and applications’, Electrochim. Acta, 2008, 53, (8), 3313–3322. doi: 10.1016/j.electacta.2007.11.054
   Web of Science ®Google Scholar
• A. Brenner: ‘Electrodeposition of alloys’; 1963, New York, Academic Press Inc.
   Google Scholar
• E. Podlaha and D. Landolt: ‘Induced Codeposition II. A mathematical model describing the electrodeposition of Ni-Mo alloys’, J. Electrochem. Soc., 1996, 143, (3), 893–899. doi: 10.1149/1.1836554
   Web of Science ®Google Scholar
• E. Podlaha and D. Landolt: ‘Induced Codeposition III. Molybdenum alloys with nickel, cobalt, and iron’, J. Electrochem. Soc., 1997, 144, (5), 1672–1680. doi: 10.1149/1.1837658
   Web of Science ®Google Scholar
• A. Marlot, P. Kern and D. Landolt: ‘Pulse plating of Ni–Mo alloys from Ni-rich electrolytes’, Electrochim. Acta, 2002, 48, (1), 29–36. doi: 10.1016/S0013-4686(02)00544-3
   Web of Science ®Google Scholar
• A. Chianpairot, G. Lothongkum, C. A. Schuh and Y. Boonyongmaneerat: ‘Corrosion of nanocrystalline Ni–W alloys in alkaline and acidic 3.5 wt.% NaCl solutions’, Corros. Sci., 2011, 53, (3), 1066–1071. doi: 10.1016/j.corsci.2010.12.001
   Web of Science ®Google Scholar
• H. Alimadadi, M. Ahmadi, M. Aliofkhazraei and S. R. Younesi: ‘Corrosion properties of electrodeposited nanocrystalline and amorphous patterned Ni–W alloy’, Mater. Des., 2009, 30, (4), 1356–1361. doi: 10.1016/j.matdes.2008.06.036
   Web of Science ®Google Scholar
• L. Chang, Z. Wang, S. Shi and W. Liu: ‘Study on microstructure and properties of electrodeposited Ni–W alloy coating with glycolic acid system’, J. Alloys Compd., 2011, 509, (5), 1501–1504. doi: 10.1016/j.jallcom.2010.10.136
   Web of Science ®Google Scholar
• O. Younes and E. Gileadi: ‘Electroplating of Ni/W Alloys I. Ammoniacal citrate baths’, J. Electrochem. Soc., 2002, 149, (2), C100–C111. doi: 10.1149/1.1433750
   Google Scholar
• T. Yamasaki, P. Schloβmacher, K. Ehrlich and Y. Ogino: ‘Formation of amorphous electrodeposited Ni-W alloys and their nanocrystallization’, Nanostruct. Mater., 1998, 10, (3), 375–388. doi: 10.1016/S0965-9773(98)00078-6
   Google Scholar
• M. Datta and D. Landolt: ‘Fundamental aspects and applications of electrochemical microfabrication’, Electrochim. Acta, 2000, 45, (15), 2535–2558. doi: 10.1016/S0013-4686(00)00350-9
   Web of Science ®Google Scholar
• A. Sharma, S. Bhattacharya, S. Das and K. Das: ‘A study on the effect of pulse electrodeposition parameters on the morphology of pure tin coatings’, Metall. Mater. Trans. A, 2014, 45, (10), 4610–4622. doi: 10.1007/s11661-014-2389-8
   Web of Science ®Google Scholar
• E. Podlaha and D. Landolt: ‘Induced Codeposition I. An experimental investigation of Ni‐Mo alloys’, J. Electrochem. Soc., 1996, 143, (3), 885–892. doi: 10.1149/1.1836553
   Web of Science ®Google Scholar
• H. Goldasteh and S. Rastegari: ‘'The influence of pulse plating parameters on structure and properties of Ni–W–TiO2 nanocomposite coatings’, Surf. Coat. Technol., 2014, 259, 393–400. doi: 10.1016/j.surfcoat.2014.10.064
   Web of Science ®Google Scholar
• M. Adabi and A. Amadeh: ‘Effect of electrodeposition conditions on properties of Ni-Al composite coatings’, Surf. Eng., 2015, 31, (9), 650–658. doi: 10.1179/1743294414Y.0000000449. doi: 10.1179/1743294414Y.0000000449
   Web of Science ®Google Scholar
• M. Aliofkhazraei, S. Ahangarani and A. S. Rouhaghdam: ‘Effect of the duty cycle of pulsed current on nanocomposite layers formed by pulsed electrodeposition’, Rare Met., 2010, 29, (2), 209–213. doi: 10.1007/s12598-010-0036-0
   Web of Science ®Google Scholar
• M. Allahyarzadeh, B. Roozbehani and A. Ashrafi: ‘Electrodeposition of high Mo content amorphous/nanocrystalline Ni–Mo alloys using 1-ethyl-3-methyl-imidazolium chloride ionic liquid as an additive’, Electrochim. Acta, 2011, 56, (27), 10210–10216. doi: 10.1016/j.electacta.2011.09.011
   Web of Science ®Google Scholar
• M. Allahyarzadeh, B. Roozbehani, A. Ashrafi and S. Shadizadeh: ‘Electrodeposition of high Mo content amorphous/nanocrystalline Ni–Mo alloys using 1-methyl-imidazolium chloride ionic liquid as an additive’, Surf. Coat. Technol., 2011, 206, (1), 137–142. doi: 10.1016/j.surfcoat.2011.07.004
   Web of Science ®Google Scholar
• M. Allahyarzadeh, B. Roozbehani, A. Ashrafi, S. Shadizadeh, A. Seddighian and E. Kheradmand: ‘A novel aspect of two imidazolium-based ionic liquids in electrodeposition of amorphous/nanocrystalline Ni-Mo’, J. Electrochem. Soc., 2012, 159, (8), D473–D478. doi: 10.1149/2.065208jes
   Google Scholar
• V. Richoux, S. Diliberto, C. Boulanger and J. Lecuire: ‘Pulsed electrodeposition of bismuth telluride films: Influence of pulse parameters over nucleation and morphology’, Electrochim. Acta, 2007, 52, (9), 3053–3060. doi: 10.1016/j.electacta.2006.09.042
   Web of Science ®Google Scholar
• R. Balachandran, H. Yow, B. Ong, K. B. Tan, K. Anuar and H. Wong: ‘Surface morphology and electrical properties of pulse electrodeposition of NiFe films on copper substrates in ultrasonic field’, Int. J. Electrochem. Sci, 2011, 6, 3564–3579.
   Web of Science ®Google Scholar
• C.-K. Chung and W. Chang: ‘Effect of pulse frequency and current density on anomalous composition and nanomechanical property of electrodeposited Ni–Co films’, Thin Solid Films, 2009, 517, (17), 4800–4804. doi: 10.1016/j.tsf.2009.03.087
   Web of Science ®Google Scholar
• C.-K. Chung and W. Chang: ‘Effect of pulse frequency on the morphology and nanoindentation property of electroplated nickel films’, Microsyst. Technol., 2007, 13, (5–6), 537–541. doi: 10.1007/s00542-006-0194-z
   Web of Science ®Google Scholar
• H. Nasiri Vatan, M. Mohammad Shafiee, A. Khanfekr, M. Laleh, H. Kaffashan and K. Jafarzadeh: ‘Optimisation of experimental conditions for pulse electrodeposition of nanostructured platinum’, Surf. Eng., 2014, 30, (2), 89–96. doi: 10.1179/1743294413Y.0000000228
   Web of Science ®Google Scholar
• P. Bera, M. D. Kumar, C. Anandan and C. Shivakumara: ‘Characterization and microhardness of electrodeposited Ni–W coatings obtained from gluconate bath’, Surf. Rev. Lett., 2014, 22, (1), 1550011-1–1550011-15.
   Google Scholar
• F. Z. Yang, Y. F. Guo, L. Huang, S. K. Xu and S. M. Zhou: ‘Electrodeposition, structure and corrosion resistance of nanocrystalline Ni‐W alloy’, Chin. J. Chem., 2004, 22, (3), 228–231.
   Web of Science ®Google Scholar
• A. Hadipour, S. M. Monirvaghefi and M. Bahrololoom: ‘Electroless deposition of graded Ni-P coatings’, Surf. Eng., 2015, 31, (6), 4519–4521. doi:10.1179/1743294414Y.0000000430. doi: 10.1179/1743294414Y.0000000430
   Web of Science ®Google Scholar
• C. Shanthi, S. Barathan, R. Jaiswal, R. Arunachalam and S. Mohan: ‘The effect of pulse parameters in electro deposition of silver alloy’, Mater. Lett., 2008, 62, (30), 4519–4521. doi: 10.1016/j.matlet.2008.08.032
   Web of Science ®Google Scholar
• C. Schuh, T. Nieh and H. Iwasaki: ‘The effect of solid solution W additions on the mechanical properties of nanocrystalline Ni’, Acta Mater., 2003, 51, (2), 431–443. doi: 10.1016/S1359-6454(02)00427-5
   Web of Science ®Google Scholar
• G. Devaraj, S. Guruviah and S. K. Seshadri: ‘Pulse plating’, Mater. Chem. Phys., 1990, 25, (5), 439–461. doi: 10.1016/0254-0584(90)90111-M
   Web of Science ®Google Scholar
• E. Budevski, G. Staikov and W. Lorenz: ‘Electrocrystallization: nucleation and growth phenomena’, Electrochim. Acta, 2000, 45, (15), 2559–2574. doi: 10.1016/S0013-4686(00)00353-4
   Web of Science ®Google Scholar
• W. Lorenz and G. Staikov: ‘2D and 3D thin film formation and growth mechanisms in metal electrocrystallization—an atomistic view by in situ STM’, Surf. Sci., 1995, 335, 32–43. doi: 10.1016/0039-6028(95)00576-5
   Web of Science ®Google Scholar
• K. Sriraman, S. G. S. Raman and S. Seshadri: ‘Synthesis and evaluation of hardness and sliding wear resistance of electrodeposited nanocrystalline Ni–W alloys’, Mater. Sci. Eng.: A, 2006, 418, (1), 303–311. doi: 10.1016/j.msea.2005.11.046
   Web of Science ®Google Scholar
• T. J. Rupert and C. A. Schuh: ‘Sliding wear of nanocrystalline Ni–W: structural evolution and the apparent breakdown of Archard scaling’, Acta Mater., 2010, 58, (12), 4137–4148. doi: 10.1016/j.actamat.2010.04.005
   Web of Science ®Google Scholar
• M. Nematollahi, M. Heidarian, M. Peikari, S. Kassiriha, N. Arianpouya and M. Esmaeilpour: ‘Comparison between the effect of nanoglass flake and montmorillonite organoclay on corrosion performance of epoxy coating’, Corros. Sci., 2010, 52, (5), 1809–1817. doi: 10.1016/j.corsci.2010.01.024
   Web of Science ®Google Scholar
• ASTM. Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus; 2010, West Conshohocken, PA, ASTM International.
   Google Scholar
• N. Udompanit, P. Wangyao, S. Henpraserttae and Y. Boonyongmaneerat: ‘ Wear response of composition-modulated multilayer Ni–W coatings’, Advanced Materials Research, 2014, Trans Tech Publ, 302–309.
   Google Scholar