Effect of re−sintering temperature on compact microstructure and compressive properties of SiC and Ti reinforced aluminum matrix composites by powder metallurgy

References

• Shahrdami L, Sedghi A, Shaeri MH. Microstructure and mechanical properties of Al matrix nanocomposites reinforced by different amounts of CNT and SiCw. Compos Part B. 2019;175:107081.
   Web of Science ®Google Scholar
• Chelladurai SJS, Kumar SS, Venugopal N, et al. A review on mechanical properties and wear behaviour of aluminium based metal matrix composites. Mater Today Proc. 2021;37:908–916.
   Google Scholar
• Rangrej S, Pandya S, Menghani J. Effects of reinforcement additions on properties of aluminium matrix composites – a review. Mater Today Proc. 2021;44:637–641.
   Google Scholar
• Wang JF, Wang Y. Microstructure and mechanical properties of the semisolid slurries and rheoformed component of nano–sized SiC/7075 aluminum matrix composite prepared by ultrasonic–assisted semisolid stirring. Mater Sci Eng A. 2015;639:350–358.
   Web of Science ®Google Scholar
• Bonatti RS, Siqueira RR, Padilha GS, et al. Distinct Alp/Sip composites affecting its densification and mechanical behavior. J Alloy Compd. 2018;757:434–447.
   Web of Science ®Google Scholar
• Jayashree PK, Gowrishankar MC, Sathyashankara S, et al. The effect of SiC content in aluminum–based metal matrix composites on the microstructure and mechanical properties of welded joints. J Mater Res Technol. 2021;12:2325–2339.
   Google Scholar
• Chen SG, Hassanzadeh–Aghdam MK, Ansari R. An analytical model for elastic modulus calculation of SiC whisker–reinforced hybrid metal matrix nanocomposite containing SiC nanoparticles. J Alloy Compd. 2018;767:632–641.
   Web of Science ®Google Scholar
• Azimi H, Nourouzi S, Jamaati R. Effects of Ti particles and T6 heat treatment on the microstructure and mechanical properties of A356 alloy fabricated by compocasting. Mater Sci Eng A. 2021;818:141443.
   Web of Science ®Google Scholar
• Geng L, Wu K, Yao GK. Sic–Al interface crystallographic orientation relationship in a squeeze–cast SiCw/Al composite. Mater Charact. 1995;34:227–229.
   Web of Science ®Google Scholar
• Devediga U, Fernandes P, Shetty SK. Significance of sintering temperature and time on aluminium reinforced carbon nanotube and flyash composites. Mater Today Proc. 2022;52:758–761.
   Google Scholar
• Chintada S, Dora SP, Kare D, et al. Developments in sintered aluminium based composites. Met Powder Rep. 2021;76:32–39.
   Google Scholar
• Sherif ESM, Latief FH, Junaedi H, et al. Influence of exfoliated graphite nanoplatelets particles additions and sintering temperature on the mechanical properties of aluminum matrix composites. Int J Electrochem Sci. 2012;7:4352–4361.
   Web of Science ®Google Scholar
• Umasankar V, Xavior MA, Karthikeyan S. Experimental evaluation of the influence of processing parameters on the mechanical properties of SiC particle reinforced AA6061 aluminium alloy matrix composite by powder processing. J Alloy Compd. 2014;582:380–386.
   Web of Science ®Google Scholar
• Moktar MF. Study on sintering behavior of alumina particle reinforced aluminum matrix composites and its propertiesUniversity of Technology Petronas, Seri Iskandar, 2008.
   Google Scholar
• Prasad DS, Shoba C, Ramanaiah N. Investigations on mechanical properties of aluminum hybrid composites. J Mater Res Technol. 2014;3:79−85.
   Google Scholar
• Kumar H, Prasad R, Kumar P, et al. Mechanical and tribological characterization of industrial wastes reinforced aluminum alloy composites fabricated via friction stir processing. J Alloy Compd. 2020;831:154832.
   Web of Science ®Google Scholar
• Martin JM, Castro F. Liquid phase sintering of P/M aluminium alloys: effect of processing conditions. J Mater Process Tech. 2003;143:814–821.
   Web of Science ®Google Scholar
• Geng L, Ochiai S, Hu JQ, et al. Compression testing of a SiCw/Al composite at temperatures close to and above the solidus of the matrix alloy. Mater Sci Eng A. 1998;246:302–305.
   Web of Science ®Google Scholar
• Buha J, Lumley RN, Crosky AG. Secondary ageing in an aluminium alloy 7050. Mater Sci Eng A. 2008;492:1–10.
   Web of Science ®Google Scholar
• Youssef KM, Scattergood KO, Murty KL, et al. Nanocrystalline Al–Mg alloy with ultrahigh strength and good ductility. Scripta Mater. 2006;54:251–256.
   Web of Science ®Google Scholar
• Xu XJ, Jiang Z, Tabie VM, et al. Effect of SiCw volume fraction and cold pressure on microstructure and mechanical properties of aluminum matrix composites. Mater Res Express. 2019;6:126597.
   Web of Science ®Google Scholar
• Chen X, Xia DB, Zhang JL, et al. Ultrafine–grained Al–Zn–Mg–Cu alloy processed via cross accumulative extrusion bonding and subsequent aging: microstructure and mechanical properties. J Alloy Compd. 2020;846:156306.
   Web of Science ®Google Scholar
• Chintada S, Dora SP, Kare D, et al. Developments in sintered aluminum–based composites. Met Powder Rep. 2021;76:32–39.
   Google Scholar
• Lin KP, Pang SD. The influence of thermal residual stresses and thermal generated dislocation on the mechanical response of particulate−reinforced metal matrix nanocomposites. Compos Part B. 2015;83:105–116.
   Web of Science ®Google Scholar
• Fei WD, Hu M, Yao CK. Effects of thermal residual stress creeping on microstructure and tensile properties of SiC whisker reinforced aluminum matrix composite. Mater Sci Eng A. 2003;356:17–22.
   Web of Science ®Google Scholar
• Min KH, Kang SP, Kim DG, et al. Sintering characteristic of Al2O3–reinforced 2xxx series Al composite powders. J Alloy Compd. 2005;400:150–153.
   Web of Science ®Google Scholar
• Kumar N, Bharti A, Saxena KK. A re–investigation: effect of powder metallurgy parameters on the physical and mechanical properties of aluminium matrix composites. Mater Today Proc. 2021;44:2188–2193.
   Google Scholar
• Sahoo S, Jha BB, Chaubey AK, et al. A nano–indentation study of hot consolidated steel matrix composite. Mater Today Proc. 2022;56:954–958.
   Google Scholar
• Asl MS, Nayebi B, Motallebzadeh A, et al. Nanoindentation and nanostructural characterization of ZrB2–SiC composite doped with graphite nano–flakes. Compos Part B. 2019;175:107153.
   Web of Science ®Google Scholar
• Zhang J, Lian LX, Liu Y. Liquid phase enhanced sintering of porous aluminum for cylindrical Al–acetone heat pipe. Int J Heat Mass Tran. 2020;152:119512.
   Web of Science ®Google Scholar
• Jiang BZ, Doi K, Tsuchiya K, et al. Micromechanical properties of steel corrosion products in concrete studied by nano–indentation technique. Corros Sci. 2020;163:108304.
   Web of Science ®Google Scholar
• Qu XY, Wang FC, Shi CS, et al. In situ synthesis of a gamma–Al2O3 whisker reinforced aluminium matrix composite by cold pressing and sintering. Mater Sci Eng A. 2018;709:223–231.
   Web of Science ®Google Scholar
• Ali R, Ali F, Zahoor A, et al. Effect of sintering path on the microstructural and mechanical behavior of aluminum matrix composite reinforced with pre–synthesized Al/Cu core–shell particles. J Alloy Compd. 2021;889:161531.
   Web of Science ®Google Scholar
• Gu DD, Rao XW, Dai DH, et al. Laser additive manufacturing of carbon nanotubes (CNTs) reinforced aluminum matrix nanocomposites: processing optimization, microstructure evolution and mechanical properties. Addit Manuf. 2019;29:100801.
   Web of Science ®Google Scholar
• Jia DC, Zhou Y. Mechanical properties and fracture behavior of SiCw reinforced Al–12Ti alloy prepared by bechanical alloying technique. Mater Sci Eng A. 1998;252:44–52.
   Web of Science ®Google Scholar