590
Views
31
CrossRef citations to date
0
Altmetric
Original Articles

A Zero-Dimensional Combustion Model with Reduced Kinetics for SI Engine Knock Simulation

&
Pages 828-852 | Received 17 Mar 2008, Accepted 04 Mar 2009, Published online: 27 May 2009

REFERENCES

  • Agosta , A. , Cernansky , N.P. , Miller , D.L. , Faravelli , T. , and Ranzi , E. 2004 . Reference components of jet fuel: Kinetic modeling and experimental results . Exp. Therm. Fluid. Sci. , 28 , 701 .
  • Arrigoni , V. , and Cornetti , G.M. 1974 . High speed knock in SI engines . SAE 741056 .
  • Blunsdon , C.A. , and Dent , J.C. 1994 . The simulation of autoignition and knock in a spark ignition engine with disk geometry . SAE 940524 .
  • Curran , H.J. , Gaffuri , P. , Pitz , W.J. , and Westbrook , C.K. 1998 . A comprehensive modeling study of n-heptane oxidation . Combust. Flame , 114 , 149 .
  • Curran , H.J. , Gaffuri , P. , Pitz , W.J. , and Westbrook , C.K. 2002. A comprehensive modeling study of iso-octane oxidation. Combust. Flame , 129, 253.
  • Eckert , P. , Kong , S. , and Reits , R. 2003 . Modeling autoignition and engine knock under spark ignition conditions . SAE 2003-01-0011 .
  • Ferguson , C.R. 1986 . Internal Combustion Engines New York : John Wiley & Sons .
  • Ferguson , C.R. , and Kirkpatrick , A.T. 2001 . Internal Combustion Engines: Applied Thermodynamics , New York : John Wiley & Sons, Inc. , p. 369 .
  • Gordon , S. , and McBride , B.J. 1994 . Computer program for calculation of complex chemical equilibrium compositions and applications, I: Analysis . New York: NASA RP 1311 .
  • Hajireza , S. , Mauss , F. , and Sunden , B.A. 1997 . Investigation of end-gas temperature and pressure increases in gasoline engines and relevance for knock occurrence . SAE 971671 .
  • Hajireza , S. , Mauss , F. , and Sunden , B.A. 1999 . Three-zone model for investigation of gas behavior in the combustion chamber of SI engines in relation to knock . SAE 1999-01-0219 .
  • Halstead , M.P. , Kirsch , L.J. , Prothero , A. , and Quinn , C.P. 1975 . A mathematical model for hydrocarbon autoignition at high pressure . Proc. Roy. Soc. , A346 , 515 .
  • Heywood , J.B. 1988 . Internal Combustion Engine Fundamentals , New York : McGraw Hill Book Comp .
  • Kaario , O. , Larmi , M. , and Tanner , F. 2002 . Comparing single-step and multi-step chemistry using the laminar and turbulent characteristic time combustion model in two diesel engines . SAE 2002-01-1749 .
  • Kong , S. , Han , Z. , and Reitz , R. 1995 . The development and application of a diesel ignition and combustion model for multidimensional engine simulations . SAE 950278 .
  • Li , H. , Miller , D.L. , and Cernansky , N.P. 1992 . A study on the application of a reduced chemical reaction model to motored engines for heat release prediction . SAE paper 922328, SAE Trans. 101, Section 3, 2021 .
  • Li , H. , Prabhu , S.K. , Miller , D.L. , and Cemansky , N.P. 1994 . Autoignition chemistry studies on primary reference fuels in a motored engine . SAE 942062 .
  • Liu , J. , Gong , J. , and Cai , L. 2006 . Multi-dimensional simulation of air/fuel premixing and stratified combustion in a gasoline direct injection engine with combustion chamber bowl offset . SAE 2006-32-0006 .
  • Mose , E. , Yarin , A. , and Yoseph , B. 1995 . On knocking prediction in spark ignition engines . Combustion and Flame , 101 , 239 .
  • Najt , P.M. 1987 . Evaluating threshold knock with a semi-empirical model—initial results . SAE 872149 .
  • Noda , T. , and Kazuya , H. 2004 . Development of transient knock prediction technique by using a zero-dimensional knocking simulation with chemical kinetics . SAE 2004-01-0618 .
  • Oran , E. , and Boris , J. 1991 . Numerical Approaches to Combustion Modeling . Washington, DC : Progress in Astronautics and Aeronautics, American Institute of Aeronautics and Astronautics .
  • Reynolds , W.C. 1986 . The element potential method for chemical equilibrium analysis: Implementation in the interactive program STANJAN-III. Technical report . Department of Mechanical Engineering, Stanford University .
  • Swarts , A. , Yates , A. , and Viljoen , C. 2004 . Standard knock intensity revisited: Atypical burn rate characteristics identified in the CFR octane rating engine . SAE 2004-01-1850 .
  • Takagi , Y. , and Itoh , T. 1988 . An analytical study on knocking heat release and its control in a spark ignition engine . SAE 880196 .
  • Tanaka , S. , Ayala , F. , and Keck , C.J. 2003a . A reduced chemical kinetic model for HCCI combustion of primary reference fuels in a rapid compression machine . Sloan Automotive Laboratory, Massachusetts Institute of Technology , Cambridge , Massachusetts , USA .
  • Tanaka , S. , Ayala , F. , Keck , C.J. , and Heywood , J.B. 2003b . Two-stage ignition in HCCI combustion and HCCI control by fuels and additives . Combustion and Flame , 132 , 219 .
  • Westbrook , C.K. 2000. Chemical kinetics of hydrocarbon ignition in practical combustion systems. 28th International Symposium on Combustion, 30 July–4 August, Edinburgh, UK.
  • Westbrook , C.K. , Curran , H.J. , Pitz , W.J. , Callahan , C.V. , and Dryer , F.L. 1998 . Oxidation of automotive primary reference fuels at elevated pressures . Twenty-Seventh International Conference on Combustion , 2–7 August, Boulder, Colorado .
  • Woschni , G. 1967 . A universally applicable equation for the instantaneous heat transfer coefficient in the internal combustion engine . SAE paper 670931 .
  • Zheng , J. 2005 . A study of homogeneous ignition and combustion processes in CI, SI, and HCCI engine systems . Ph.D. thesis, Drexel University , Philadelphia , Pennsylvania , USA .
  • Zheng , J. , Miller , D.L. , and Cernansky , N.P. 2004 . A global reaction model for the hcci combustion process . 30th Intl. Symp. Combust. , 25–30 July , Chicago, Illinois, Poster 4F1 – 18 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.