223
Views
1
CrossRef citations to date
0
Altmetric
Original Articles

Enhanced Stabilization of Multiple Premixed Flames with a Compressive Vortex Pair on a Stratified Burner

, &
Pages 1452-1467 | Received 31 Mar 2013, Accepted 16 Apr 2015, Published online: 18 Jun 2015

REFERENCES

  • Azzoni, R., Ratti, S., Aggarwal, S.K., and Puri, I.K. 1999. The structure of triple flames stabilized on a slot burner. Combust. Flame, 119, 23.
  • Boggavarapu, P., Ray, B., and Ravikrishna, R.V. 2014. Thermal efficiency of LPG and PNG-fired burners: Experimental and numerical studies. Fuel, 116, 709.
  • Carleton, F.B. Tamir, A., and Weinberg, F.J. 1992. Heat recuperation applied to a gas ring burner. Combust. Sci. Technol., 83, 327.
  • Chang, Y.H., Ting, S.C., Su, J.Y., Soong, C.Y., and Yang, J.T. 2013. Ventral-clap modes of hovering passerines. Phys. Rev. E: Stat. Nonlinear Soft Matter Phys., 87, 022707.
  • Chen, Y.C., Chang, C.C., Pan, K.L., and Yang, J.T. 1998. Flame lift-off and stabilization mechanisms of nonpremixed jet flames on a bluff-body burner. Combust. Flame, 115, 51.
  • Cheng, R.K., and Shepherd, I.G. 1991. The influence of burner geometry on premixed turbulent flame propagation. Combust. Flame, 85, 7.
  • Choi, B.C., Kim, K.N., and Chung, S.H. 2009. Autoignited laminar lifted flames of propane in coflow jets with tribrachial edge and mild combustion. Combust. Flame, 156, 396.
  • Dunn-Rankin, D. (Ed.). 2007. Lean Combustion: Technology and Control, Academic Press, Amsterdam Netherlands/Boston USA.
  • Esquiva-Dano, I., and Escudie, D. 2005. A way of considering the influence of the bluff-body geometry on the nonpremixed flame stabilization process. Combust. Flame, 142, 299.
  • Esquiva-Dano, I., Nguyen, H.T., and Escudie, D. 2001. Influence of a bluff-body’s shape on the stabilization regime of non-premixed flames. Combust. Flame, 127, 2167.
  • Filatyev, S.A., Driscoll, J.F., Carter, C.D., and Donbar, J.M. 2005. Measured properties of turbulent premixed flames for model assessment, including burning velocities, stretch rates, and surface densities. Combust. Flame, 141, 1.
  • Foat, T., Yap, K.P., and Zhang, Y. 2001. The visualization and mapping of turbulent premixed impinging flames. Combust. Flame, 125, 839.
  • Gil, Y.S., Jung, H.S., and Chung, S.H. 1998. Premixed flame stabilization in an axisymmetric curved-wall jet. Combust. Flame, 113, 348.
  • Gillon, P., Chahine, M., Sarh, B., Blanchard, J.N., and Gilard, V. 2012. Stabilization of lifted laminar co-flow flames by oxygen-enriched air. Combust. Sci. Technol., 184, 556.
  • Han, D., and Mungal, M.G. 2003. Simultaneous measurements of velocity and CH distributions. Part 1: Jet flames in co-flow. Combust. Flame, 132, 565.
  • Huang, R.F., and Yen, S.C. 2008. Aerodynamic characteristics and thermal structure of nonpremixed reacting swirling wakes at low Reynolds numbers. Combust. Flame, 155, 539.
  • Huang, X.Q., Leung, C.W., Chan, C.K., and Probert, S.D. 2006. Thermal characteristics of a premixed impinging circular laminar-flame jet with induced swirl. Appl. Energy, 83, 401.
  • Hwang, C.H., Lee, S., Kim, J.H., and Lee, C.E. 2009. An experimental study on flame stability and pollutant emission in a cyclone jet hybrid combustor. Appl. Energy, 86, 1154.
  • Kim, K.N., Won, S.H., and Chung, S.H. 2007. Characteristics of laminar lifted flames in coflow jets with initial temperature variation. Proc. Combust. Inst., 31, 947.
  • Kim, W., Do, H., and Mungal, M. 2011. The improvement of blowout limit in partially/fully premixed flames with geometrically modified bluffbody bases. Exp. Fluids, 51, 1315.
  • Lacour, C., Honore, D., Boukhalfa, A., and Hauguel, R. 2008. Syabilization mechanisms of laminar partially premixed flames from a domestic-like burner. Combust. Sci. Technol., 180, 156.
  • Law, C.K. 2006. Combustion Physics, Cambridge University Press, New York.
  • Lee, J.G., Lee, T.W., Nye, D.A., and Santavicca, D.A. 1995. Lewis number effects on premixed flames interacting with turbulent Karman vortex streets. Combust. Flame, 100, 161.
  • Li, C.C., Chen, J.W., and Yang, J.T. 2012. Stabilization of double flames interacting with the intersecting flow on a V-shaped burner. Combust. Sci. Technol., 184, 2117.
  • Li, H.B., Wong, T.T., Leung, C.W., and Probert, S.D. 2006. Thermal performances and CO emissions of gas-fired cooker-top burners. Appl. Energy, 83, 1326.
  • Li, H.Y., Chao, S.M., Chen, J.W., and Yang, J.T. 2013. Thermal performance of plate-fin heat sinks with piezoelectric cooling fan. Int. J. Heat Mass Transfer, 57, 722.
  • Li, K., and Tankin, R.S. 1987. A study of cold and combusting flow around bluff-body combustors. Combust. Sci. Technol., 52, 173.
  • Lin, H.C., Cheng, T.S., Chen, B.C., Ho, C.C., and Chao, Y.C. 2009. A comprehensive study of two interactive parallel premixed methane flames on lean combustion. Proc. Combust. Inst., 32, 995.
  • Meyer, T.R., Fiechtner, G.J., Gogineni, S.P., Rolon, J.C., Carter, C.D., and Gord, J.R. 2004. Simultaneous PLIF/PIV investigation of vortex-induced annular extinction in H2-air counterflow diffusion flames. Exp. Fluids, 36, 259.
  • Mueller, C.J., and Schefer, R.W. 1998. Coupling of diffusion flame structure to an unsteady vortical flow-field. Symp. (Int.) Combust., 27, 1105.
  • Nishimura, T., Kaga, T., Shirotani, K., and Kadowaki, J. 1999. Vortex structures and temperature fluctuations in a bluff-body burner. J. Visualization, 1, 271.
  • Pan, K.L., Li, C.C., Juan, W.C., and Yang, J.T. 2009. Low-frequency oscillation of a non-premixed flame on a bluff-body burner. Combust. Sci. Technol., 181, 1217.
  • Raffel, M., Willert, C.E., Wereley, S.T., and Kompenhans, J. 2007. Particle Image Velocimetry: A Practical Guide, Springer, Berlin, Germany.
  • Roquemore, W.M., Tankin, R.S., Chiu, H.H., and Lottes, S.A. 1986. A study of a bluff-body combustor using laser sheet lighting. Exp. Fluids, 4, 205.
  • Sahu, K.B., Kundu, A., Ganguly, R., and Datta, A. 2009. Effects of fuel type and equivalence ratios on the flickering of triple flames. Combust. Flame, 156, 484.
  • Schefer, R.W., Namazian, M., Kelly, J., and Perrin, M. 1996. Effect of confinement on bluff-body burner recirculation zone characteristics and flame stability. Combust. Sci. Technol., 120, 185.
  • Schmidt, J., Kostka, S., Lynch, A., and Ganguly, B. 2011. Simultaneous particle image velocimetry and chemiluminescence visualization of millisecond-pulsed current–voltage-induced perturbations of a premixed propane/air flame. Exp. Fluids, 51, 657.
  • Seffrin, F., Fuest, F., Geyer, D., and Dreizler, A. 2010. Flow field studies of a new series of turbulent premixed stratified flames. Combust. Flame, 157, 384.
  • Shanbhogue, S.J., Husain, S., and Lieuwen, T. 2009. Lean blowoff of bluff body stabilized flames: Scaling and dynamics. Prog. Energy Combust. Sci., 35, 98.
  • Shoshin, Y., Bastiaans, R.J.M., and de Goey, L.P.H. 2013. Anomalous blow-off behavior of laminar inverted flames of ultra-lean hydrogen–methane–air mixtures. Combust. Flame, 160, 565.
  • Steinberg, A., Driscoll, J., and Ceccio, S. 2008. Measurements of turbulent premixed flame dynamics using cinema stereoscopic PIV. Exp. Fluids, 44, 985.
  • Valera-Medina, A., Syred, N., Kay, P., and Griffiths, A. 2011. Central recirculation zone analysis in an unconfined tangential swirl burner with varying degrees of premixing. Exp. Fluids, 50, 1611.
  • Wright, F.H. 1959. Bluff-body flame stabilization: Blockage effects. Combust. Flame, 3, 319.
  • Yahagi, Y., Sekiguti, M., and Suzuki, K. 2007. Flow structure and flame stability in a micro can combustor with a baffle plate. Appl. Therm. Eng., 27, 788.
  • Yang, J.T., Chang, C.C., and Pan, K.L. 2002. Flow structures and mixing mechanisms behind a disc stabilizer with a central fuel jet. Combust. Sci. Technol., 174, 93.
  • Yang, J.T., Hsiao, F.C., and Lin, Y.C. 2009. Transient flame spread during convective ignition of solid fuel in a sudden-expansion combustor. Combust. Flame, 156, 1917.
  • Yokomori, T., and Mizomoto, M. 2003. Flame temperatures along a laminar premixed flame with a non-uniform stretch rate. Combust. Flame, 135, 489.
  • Zhen, H.S., Choy, Y.S., Leung, C.W., and Cheung, C.S. 2011. Effects of nozzle length on flame and emission behaviors of multi-fuel-jet inverse diffusion flame burner. Appl. Energy, 88, 2917.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.