Combustion of Metallurgical Wastes Using Secondary Aluminum Foils

References

• Agarski, B., Budak, I., Vukelic, Dj., and Hodolic, J. 2016. Fuzzy multi-criteria-based impact category weighting in life cycle assessment. J. Cleaner Prod., 112, 3256–3266
   Web of Science ®Google Scholar
• de Brito, R.A., Medeiros, F.F.P., Gomes, U.U., Costa, F.A., Silva, A.G.P., and Alves, C. 2008. Production of tantalum by aluminothermic reduction in plasma reactor. Int. J. Refract. Met. Hard Mater., 26, 433.
   Web of Science ®Google Scholar
• Duraes, L., Benilde, C., Santos, R., Correia, A., Campos, J., and Portugal, A. 2007. Fe2O3/aluminum thermite reaction intermediate and final products characterization. Mater. Sci. Eng., A, 465, 199.
   Web of Science ®Google Scholar
• Duraes, L., Campos, J., and Portugal, A. 2006. Radial combustion propagation in iron(III) oxide/aluminum thermite mixtures. Propellants Explos. Pyrotech., 31, 42.
   Web of Science ®Google Scholar
• Evans, R., and Guest, G. 2002. The Aluminium Decoating Handbook. Stein Atkinson Stordy Ltd. (Document: GPX-ADHB-001-060900). Available at: http://infohouse.p2ric.org/ref/26/25275.pdf.
   Google Scholar
• Fan, R.H., Lu, H.L., Sun, K.N., Wang, W.X., and Yi, X.B. 2006. Kinetics of thermite reaction in Al-Fe2O3 system. Thermochim. Acta, 440, 129.
   Web of Science ®Google Scholar
• Gavrilovski, M., Manojlovic, V., Kamberovic, Z., and Korac, M. 2014. Semi-empirical software for the aluminothermic and carbothermic reactions. Metall. Mater. Eng., 20, 199.
   Google Scholar
• Grabda, M., Oleszek, S., Shibata, E., and Nakamura, T. 2014. Study on simultaneous recycling of EAF dust and plastic waste containing TBBPA. J. Hazard. Mater., 278, 25.
   PubMed Web of Science ®Google Scholar
• Guinee, J.B., Gorree, M., Heijungs, R., Huppes, G., Kleijn, R., van Oers, L., Sleeswijk, A.W., Suh, S., de Haes, U.H.A., de Bruijn, H., van Duin, R., and Huijbregts, M.A.J. 2001. Handbook on Life Cycle Assessment, Operational Guide to the ISO Standards, Vols. 1, 2a, 2b, and 3; Springer, Netherlands, 2001.
   Google Scholar
• Han, J., Liu, W., Qin, W., Jiao, F., Wang, D., and Liang, Ch. 2016. Thermodynamic and kinetic studies for intensifying selective decomposition of zinc ferrite. JOM, 68(9), 2543–2550.
   Web of Science ®Google Scholar
• Hasani, S., Panjepour, M., and Shamanian, M. 2012. The oxidation mechanism of pure aluminum powder particles. Oxid. Met., 78, 179.
   Web of Science ®Google Scholar
• Holloway, P.C., and Etsell, T.H. 2013. Evaluation of options for metals recovery from altasteel eaf dust. Can. Metall. Q., 47, 149.
   Google Scholar
• Issa, H., Kamberovic, Z., Gavrilovski, M., Korac, M., and Andjic, Z. 2013. Modeling of metallurgical properties of sinter mixtures of nonstandard raw iron-bearing materials. Metal. Int., 18, 5.
   Google Scholar
• Itoh, S., Tsubone, A., Yokoyama, K.M., Nakajima, K., and Nagasaka, T. 2008. New EAF dust treatment process with the aid of strong magnetic field. ISIJ Int., 48, 1339.
   Web of Science ®Google Scholar
• Kamberović, Z., Gavrilovski, M., Manojlovic, V., and Korac, M. 2015. Alternative metalothermic reducing agent produced by recycling of aluminum foil. Gazette of Intellectual Property, Republic of Serbia. Patent Application P-2014/0334.
   Google Scholar
• Kamberović, Z., Romhanji, E., Filipovic, M., and Korac, M. 2009. The recycling of high magnesium aluminium alloys estimation of the most reliable procedure. Metall. Mater. Eng., 15, 189–200.
   Google Scholar
• Kang, X., Yang, F., Lou, J., and Tang, Y. 2015. Thermal-ignition and combustion behavior of pyrotechnic composition containing mechanically activated commercial mg-al alloy. Combust. Sci. Technol., 187, 963.
   Web of Science ®Google Scholar
• Lopez, F.A., and Delgado, A.L. 2002. Enhancement of electric arc furnace dust by recycling to electric arc furnace. J. Environ. Eng., 128, 1169.
   Web of Science ®Google Scholar
• Maleki, A., Panjepour, M., Niroumand, B., and Meratian, M. 2010. Mechanism of zinc oxide–aluminum aluminothermic reaction. J. Mater. Sci., 45, 5574.
   Web of Science ®Google Scholar
• Manojlovic, V., Kamberović, Z., Sokic, M., Gavrilovski, M., and Korac, M. 2016. Designing of synergistic waste mixtures for multiphase reactive smelting. Metals, 6, 138. DOI: 10.3390/met6060138.
   Web of Science ®Google Scholar
• Manukyan, K., Aydinyan, S., Aghajanyan, A., and Grigoryan, Y. 2012. Reaction pathway in the MoO3 + Mg + C reactive mixtures. Int. J. Refract. Met. Hard Mater., 31, 28.
   Web of Science ®Google Scholar
• Marashi, M.S., and Khaki, J.V. 2009. The effect of aluminothermic reaction on the progress of carbothermic reaction in simultaneous mechanochemical reduction of CuO and ZnO. J. Alloys Compd., 482, 522.
   Web of Science ®Google Scholar
• Mei, J., Halldearn, R.D., and Xiao, P. 1999. Mechanisms of the aluminium-iron oxide thermite reaction. Scr. Mater., 41, 541.
   Web of Science ®Google Scholar
• Merzhanov, A. 2014. The chemistry of self-propagating high-temperature synthesis. J. Mater. Chem., 14, 1779.
   Web of Science ®Google Scholar
• Montenegro, V., Oustadakis, P., Tsakiridis, P., and Leonardou, S.A. 2013. Hydrometallurgical treatment of steelmaking electric arc furnace dusts (EAFD). Metall. Mater. Trans. B, 44B, 1058.
   Web of Science ®Google Scholar
• Morcali, M.H., Yucel, O., Aydin, A., and Derin, B. 2012. Carbothermic reduction of electric arc furnace dust and calcination of Waelz oxide by semi-pilot scale rotary furnace. J. Min. Metall. Sect. B, 48, 173.
   Web of Science ®Google Scholar
• Orru, R., Sannia, M., Cincotti, A., and Cao, G. 1999. Treatment and recycling of zinc hydrometallurgical wastes by self-propagating reactions. Chem. Eng. Sci., 54, 3053.
   Web of Science ®Google Scholar
• Paraskevas, D., Kellens, K., Dewulf, W., and Duflou, J. 2015. Environmental modelling of aluminium recycling: A Life Cycle Assessment tool for sustainable metal management. J. Cleaner Prod., 105, 357.
   Web of Science ®Google Scholar
• Peng, B., Peng, N., Min, X.B., Lui, H., Li, Y., Chen, D., and Xue, K. 2015. Separation of zinc from high iron-bearing zinc calcines by reductive roasting and leaching. JOM, 67, 1988.
   Web of Science ®Google Scholar
• Porcu, M., Orru, R., and Cao, G. 2004. On the use of industrial scraps for the treatment of zinc hydrometallurgical wastes by self-propagating reactions. Chem. Eng. J., 99, 247.
   Web of Science ®Google Scholar
• Ranitovic, M., Kamberovic, Z., Korac, M., Gavrilovski, M., Issa, H., and Andic, Z. 2014. Investigation of possibility for stabilization and valorization of electric arc furnace dust and glass from electronic waste. Sci. Sintering, 46, 83.
   Web of Science ®Google Scholar
• Santos, F., Brocchi, E., Araujo, V., and Souza, R. 2015. Behavior of Zn and Fe content in electric arc furnace dust as submitted to chlorination methods. Metall. Mater. Trans. B, 46B, 1729.
   Web of Science ®Google Scholar
• SimaPro. 2016. SimaPro, the world’s leading LCA software. Available at: https://simapro.com/.
   Google Scholar
• Taheri, A.M., Saidi, A., and Nourbakhsh, A.A. 2010. The effective parameters on thermal recovery and reduction of iron oxides in EAF slag. Int. J. ISSI, 7, 25.
   Google Scholar
• Urakaev, F., Akmalaev, K.A., Orynbekov, E.S., Balgysheva, B.D., and Zharlykasimova, D.N. 2016. The use of combustion reactions for processing mineral raw materials: Metallothermy and self-propagating high-temperature synthesis (review). Metall. Mater. Trans. B, 47B, 58.
   Web of Science ®Google Scholar
• Weidema, B.P., Bauer, Ch., Hischier, R., Mutel, Ch., Nemecek, T., Reinhard, J., Vadenbo, C.O., and Wernet, G. 2013. The ecoinvent database: Overview and methodology. Data quality guideline for the ecoinvent database version 3. Available at: www.ecoinvent.org.
   Google Scholar
• Yucel, B. 2012. Aluminothermic reduction of boron oxide for the manufacture of Al–B alloys. Mater. Chem. Phys., 136, 963.
   Web of Science ®Google Scholar
• Zivanovic, P., Gavrilovski, M., Stopic, S., Matic, S., Lajic, Z., and Tiano, A. 2005. The calculation and analysis of the adiabatic temperature of self-propagating high-temperature synthesis in CaWO4 + Mg(Al) system. Metall. Mater. Eng., 11, 199.
   Google Scholar