214
Views
1
CrossRef citations to date
0
Altmetric
Original Articles

Effects of Fuel Unsaturation on Transient Ignition and Flame Development in Sprays

&
Pages 136-156 | Received 15 Mar 2017, Accepted 08 Sep 2017, Published online: 06 Oct 2017

References

  • Benjumea, P., Agudelo, J.R., and Agudelo, A.F. 2011. Effect of the degree of unsaturation of biodiesel fuels on engine performance, combustion characteristics, and emissions. Energy Fuels, 25, 77.
  • Bounaceur, R., Warth, V., Sirjean, B., Glaude, P.A., Fournet, R., and Battin-Leclerc, F. 2009. Influence of the position of the double bond on the autoignition of linear alkenes at low temperature. Proc. Combust. Inst., 32, 387–394.
  • Curran, H.J., Pitz, W.J., Westbrook, C.K., Callahan, C.V., and Dryer, F.L. 1998. Proc. Combust. Inst., 27, 379–387.
  • Engine Combustion Network (ECN). 2015. Diesel sprays data search utility. Available at: http://www.sandia.gov/ecn/cvdata/dsearch/frameset.php.
  • Frossling, N. 1938. On the evaporation of falling droplets. Gerlands Beitr Geophys., 52, 170.
  • Fu, X. 2015. Partially premixed combustion in counterflow flame and dual fuel compression ignition engine. PhD thesis. University of Illinois at Chicago, Chicago, Illinois.
  • Fu, X., and Aggarwal, S.K. 2015a. Two-stage ignition and NTC phenomenon in diesel engine sprays. Fuel, 144, 188.
  • Fu, X., and Aggarwal, S.K. 2015b. Fuel unsaturation effects on NOx and PAH formation in spray flames. Fuel, 160, 1.
  • Fu, X., Garner, S., Aggarwal, S.K., and Brezinsky, K. 2013. Numerical study of NOx emissions from n-heptane and 1-heptene counterflow flames. Energy Fuels, 27, 537.
  • Garner, S., and Brezinsky, K. 2011. Biologically derived diesel fuel and NO formation: An experimental and chemical kinetic study, Part 1. Combust. Flame, 158, 2289.
  • Garner, S., Sivaramakrishnan, R., and Brezinsky, K. 2009. The high pressure pyrolysis of saturated and unsaturated C7 hydrocarbons. Proc. Combust. Inst., 32, 461.
  • Gauthier, B.M., Davidson, D.F., and Hanson, R.K. 2004. Shock tube determination of ignition delay times in full-blend and surrogate fuel mixtures. Combust. Flame, 139, 300.
  • Graboski, M.S., and McCormick, R.L. 1998. Combustion of fat and vegetable oil derived fuels in diesel engines. Prog. Energy Combust. Sci., 24, 125.
  • Han, X., Aggarwal, S.K., and Brezinsky, K. 2012. Effect of unsaturated bond on NOx and PAH formation in n-heptane and 1-heptene triple flames. Energy Fuels, 26, 879.
  • Han, Z., and Reitz, R.D. 1995. Turbulence modeling of internal combustion engines using RNG κ-ε models. Combust. Sci. Technol., 106, 267.
  • Idicheria, C.A., and Pickett, L.M. 2011. Ignition, soot formation, and end-of-combustion transients in diesel combustion under high-EGR conditions. Int. J. Engine Res., 12, 376.
  • Liu, A.B., Mather, D.K., and Reitz, R.D. 1993. Modeling the effects of drop drag and breakup on fuel sprays. SAE Paper 1993–930072.
  • Lu, T.F., and Law, C.K. 2005. A directed relation graph method for mechanism reduction. Proc. Combust. Inst., 30, 1333.
  • Mastorakos, E. 2009. Ignition of turbulent non-premixed flames. Prog. Energy Combust. Sci., 35, 57.
  • Mehl, M., Pitz, W.J., Westbrook, C.K., Yasunaga, K., Conroy, C., and Curran, H.J. 2011. Autoignition behavior of unsaturated hydrocarbons in the low and high temperature regions. Proc. Combust. Inst., 33, 201.
  • Mehl, M., Vanhove, G., Pitz, W.J., and Ranzi, E. 2008. Oxidation and combustion of the n-hexene isomers: A wide range kinetic modeling study. Combust. Flame, 155, 756–772.
  • Minetti, R., Roubaud, A., Therssen, E., Ribaucour, M., and Sochet, L.R. 1999. The chemistry of pre-ignition of n-pentane and 1-pentene. Combust. Flame, 118, 213.
  • Patterson, M.A., and Reitz, R.D. 1998. Modeling the effects of fuel spray characteristics on diesel engine combustion and emission. SAE Paper 1998–980131.
  • Pelucchi, M., Bissoli, M., Cavallotti, C., Cuoci, A., Faravelli, T., Frassoldati, A., Ranzi, E., and Stagni, A. 2014. Improved kinetic model of the low-temperature oxidation of n-heptane. Energy Fuels, 28(11), 7178.
  • Pickett, L.M., Manin, J., Genzale, C.L., Siebers, D.L., Musculus, M.P.B., and Idicheria, C.A. 2011. Relationship between diesel fuel spray vapor penetration/dispersion and local fuel mixture fraction. Int. J. Engine Res., 4, 764.
  • Pomraning, E., Richards, K., and Senecal, P. 2014. Modeling turbulent combustion using a RANS model, detailed chemistry, and adaptive mesh refinement. SAE Paper 2014-01-1116.
  • Prabhu, S.K., Bhat, R.K., Miller, D.L., and Cernansky, N.P. 1996. 1-Pentene oxidation and its interaction with nitric oxide in the low and negative temperature coefficient regions. Combust. Flame, 104, 377.
  • Raju, M., Wang, M., Dai, M., Piggott, W., and Flowers, D. 2012. Acceleration of detailed chemical kinetics using multi-zone modeling for CFD in internal combustion engine simulations, SAE Paper 2012-01-0135.
  • Ranzi, E., Frassoldati, A., Grana, R., Cuoci, A., Faravelli, T., Kelley, A.P., and Law, C.K. 2012. Hierarchical and comparative kinetic modeling of laminar flame speeds of hydrocarbon and oxygenated fuels. Prog. Energy Combust. Sci., 38(4), 468–501.
  • Ribaucour, M., Minetti, R., and Sochet, L.R. 1998. Autoignition of n-pentane and 1-pentene: Experimental data and kinetic modeling. Proc. Combust. Inst., 27, 345.
  • Richards, K.J., Senecal, P.K., and Pomraning, E. 2013. CONVERGE 2.1.0 Theory Manual, Convergent Science, Inc., Middleton, WI.
  • Salamanca, M., Mondragon, F., Agudelo, J.R., Benjumea, P., and Santamaría, A. 2012. Variations in the chemical composition and morphology of soot induced by the unsaturation degree of biodiesel and a biodiesel blend. Combust. Flame, 159, 1100.
  • Schönborn, A., Ladommatos, N., Williams, J., Allan, R., and Rogerson, J. 2009. The influence of molecular structure of fatty acid monoalkyl esters on diesel combustion. Combust. Flame, 156, 1396.
  • Senecal, P., Pomraning, E., Richards, K., and Briggs, T. 2003. Multi-dimensional modeling of direct-injection diesel spray liquid length and flame lift-off length using CFD and parallel detailed chemistry. SAE Paper 2003-01-1043.
  • Senecal, P.K., Richards, K.J., Pomraning, E., Yang, T., Dai, M.Z., McDavid, R.M., Patterson, M.A., Hou, S., and Sethaji, T. 2007. A new parallel cut-cell Cartesian CFD code for rapid grid generation applied to in-cylinder diesel engine simulations. SAE Paper 2007-01-0159.
  • Singh, E., Badra, J., Mehl, M., and Sarathy, S.M. 2017. Chemical kinetic insights into the octane number and octane sensitivity of gasoline surrogate mixtures. Energy Fuels, 31, 1945.
  • Tanaka, S., Ayala, F., Keck J.C., and Heywood, J.B. 2003. Two-stage ignition in HCCI combustion and HCCI control by fuels and additives. Combust. Flame, 132, 219.
  • Touchard, S., Buda, F., Dayma, G., Glaude, P.A., Fournet, R., and Battin-Leclerc, F. 2005. Experimental and modeling study of the oxidation of 1-pentene at high temperature. Int. J. Chem. Kinet., 37, 451.
  • Vanhove, G., Ribaucour, M., and Minetti, R. 2005. On the influence of the position of the double bond on the low-temperature chemistry of hexenes. Proc. Combust. Inst., 30, 1065.
  • Westbrook, C.K., Mehl, M., Pitz, W.J., and Sjöberg, M. 2017. Chemical kinetics of octane sensitivity in a spark-ignition engine. Combust. Flame, 175, 2.
  • Westbrook, C.K., Pitz, W.J., Sarathy, S.M., and Mehl, M. 2013. Detailed chemical kinetic modeling of the effects of CC double bonds on the ignition of biodiesel fuels. Proc. Combust. Inst., 34, 3049.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.