205
Views
1
CrossRef citations to date
0
Altmetric
Articles

Effects of nozzle geometry on the reignition by hot gas jets

ORCID Icon, ORCID Icon, ORCID Icon & ORCID Icon
Pages 296-310 | Received 31 Oct 2017, Accepted 27 Mar 2018, Published online: 13 Apr 2018

References

  • Beyer, M. 1997. Über den Zünddurchschlag explodierender Gasgemische an Gehäusen der Zündschutzart Druckfeste Kapselung, Düsseldorf, No. 228 in Fortschritt-Berichte VDI Reihe 21.Düsseldorf, VDI-Verlag.
  • Bivol, G., Golovastov, S.V., and Golub, V.V. 2016. Prechamber initiation of gaseous detonation in a channel. Combust. Sci. Technol., 188, 1165–1179.
  • Bruneaux, G. 2002. A study of mixture fraction in direct injection diesel like conditions using quantitative fuel concentration visualizations in a gaseous fuel jet, no. 2002-01-1632. SAE Technical Paper 950847.
  • Ewan, B.C.R., and Moodie, K. 1986. Structure and velocity measurements in underexpanded jets. Combust. Sci. Technol., 45, 275–288.
  • Fischer, S., Markus, D., and Maas, U. 2017. Numerical investigation of the ignition of diethyl ether/air and propane/air mixtures by hot jets. J. Loss Prevent. Proc., 49, 832–838.
  • Ghorbani, A., Markus, D., Steinhilber, G., and Maas, U. 2015. A numerical approach to investigate the maximum permissible nozzle diameter in explosion by hot turbulent jets. J. Loss Prevent. Proc., 36, 539–543.
  • Hattwig, M., and Steen, H. 2004. Handbook of Explosion Prevention and Protection, Wiley-VCH, Weinheim.
  • Iida, N., Kawaguchi, O., and Sato, G. 1985. Premixed flame propagating into a narrow channel at a high speed, part 1: flame behaviors in the channel. Combust. Flame, 60, 245–255.
  • Keenan, J.J., Makarov, D.V., and Molkov, V.V. 2017. Modelling and simulation of high-pressure hydrogen jets using notional nozzle theory and open source code OpenFOAM. Int. J. Hydrogen Energy, 42, 7447–7456.
  • Larsen, Ø., and Eckhoff, R.K. 2000. Critical dimensions of holes and slots for transmission of gas explosions. J. Loss Prevent. Proc., 13, 341–347.
  • Lieberman, D.H., Parkin, K.L., and Shepherd, J.E. 2002. Detonation initiation by a hot turublent jet for use in pulse detonation engines, In American Institute of Aeronautics and Astronautics (Ed.). 38th AIAA/ASME/SAE/ASEE Joint Propul. Conf. Exhibit., AIAA, 2002–3909.
  • Maas, U., and Warnatz, J. 1988. Ignition processes in hydrogen-oxygen mixtures. Combust. Flame, 74, 53–69.
  • Phillips, H. 1969. A summary of research into the basic principles of flameproof enclosure. Proc. Inst. Mech. Eng., 184, 23–30.
  • Redeker, T. 1981. Classification of Flammable Gases and Vapours by the Flameproof Safe Gap and the Incendicity of Electrical Sparks, No. PTB-W-18 in PTB-Bericht. Braunschweig, PTB.
  • Sadanandan, R., Markus, D., Schießl, R., Maas, U., Olofsson, J., Seyfried, H., Richter, M., and Aldén, M. 2007. Detailed investigation of ignition by hot gas jets. Proc. Combust. Inst., 31, 719–726.
  • Seitz, F., Schießl, R., and Markus, D. 2017. Ignition by hot free jets. Z. Phys. Chem., 231, 1737–1771.
  • Settles, G.S. 2001. Schlieren and Shadowgraph Techniques: Visualizing Phenomena in Transparent Media, Springer, Berlin and Heidelberg and New York.
  • Validi, A., and Jaberi, F. in press. Numerical study of turbulent jet ignition in a lean premixed configuration. Flow Turbul. Combust., 100, 197–224.
  • Wolfhard, H.G. 1958. The ignition of combustible mixtures by hot gases. Jet Prop., 28, 798–804.
  • Wolfhard, H.G., and Bruszak, A.E. 1960. The passage of explosions through narrow cylindrical channels. Combust. Flame, 4, 149–159.
  • Wright, F.H., and Becker, J.I. 1956. Combustion in the mixing zone between two parallel streams. Jet Prop., 26, 973–978.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.