References
- Anderson, W.E., Miller, K.L., Ryan, H.M., Santoro, R.J., and Dressler, J.L. 1998. Effects of periodic atomization on combustion instability in liquid-fueled propulsion systems. J. Propuls. Power, 14, 818–825.
- Arnold, R., Suslov, D., and Haidn, O.J. 2009. Influence parameters on film cooling effectiveness in a high pressure subscale combustion chamber. 47th AIAA Aerospace Sciences Meeting including The New Horizons Forum and Aerospace Exposition,Orlando, FL, AIAA, 2009–2453.
- Arnold, R., Suslov, D.I., and Haidn, O.J. 2010. Film cooling in a high-pressure subscale combustion chamber. J. Propul. Power., 26, 428–438.
- Ballal, D.R., and Lefebvre, A.H. 1978. Ignition of liquid fuel sprays at subatmospheric pressures. Comb. Flame, 31, 115–126.
- Fry, R.S., and Klem, M.D. 1997. Guidelines for Combustion Stability Specifications and Verification Procedures for Liquid Propellant Rocket Engines, CPIA Publication, Columbia, MD, 655.
- Gastal, J. 1988. Ariane third stage ignition improvement. 24th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Boston, MA, AIAA, 88–2932.
- Gebel, G.C., Mosbach, T., Meier, W., and Aigner, M. 2015. Optical and spectroscopic diagnostics of laser-induced air breakdown and kerosene spray ignition. Comb. Flame, 162, 1599–1613.
- Hessam, B., Xiaoliang, W., and Sumanta, A. 2014. Effect of uncertainty in blowing ratio on film cooling effectiveness. J. Heat. Transfer, 136, 1–11.
- Hoeprich, M.R. 1992. Rolling element bearing fatigue damage propagation. J. Tribol., 114, 328–333.
- Hulka, J., Forde, J.S., Werling, R.E., Anisimov, V.S., Kozlov, V.A., and Kositsin, L.P. 1998. Modification and verification testing of a russian NK-33 rocket engine for reusable and restartable applications. Proc. 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Cleveland, OH, AIAA, 98–3361.
- Huzel, D., and Huang, D. 1971. Design of Liquid Propellant Rocket Engines2nd ed. NASA, Washington, D.C., SP–125.
- Kendrick, D., Herding, G., Scouflaire, P., Rolon, C., and Candel, S. 1999. Effects of a recess on cryogenic flame stabilization. Comb. Flame, 118, 327–339.
- Lieuwen, T., Torres, H., Johnson, C., and Zinn, B.T. 2000. A mechanism of combustion instability in lean premixed gas turbine combustors. J. Eng. Gas Turbines Power, 123, 182–189.
- Lux, J., and Haidn, O. 2009. Effect of recess in high-pressure liquid oxygen/methane coaxial injection and combustion. J. Propuls. Power, 25, 24–32.
- Manski, D., Goertz, C., Saβnick, H.D., Hulka, J.R., Goracke, B.D., and Levack, D.J.H. 1998. Cycles for earth-to-orbit propulsion. J. Propuls. Power., 14, 588–604.
- Sliphorst, M., Groening, S., and Oschwald, M. 2011. Theoretical and experimental identification of acoustic spinning mode in a cylindrical combustor. J. Propuls. Power, 27, 182–189.
- Smith, J.J., Schneider, G., Suslov, D., Oschwald, M., and Haidn, O. 2007. Steady-state high pressure LOX/H2 rocket engine combustion. Aerosp. Sci. Technol., 11, 39–47.
- Spadaccini, L.J., and Tevelde, J.A. 1982. Autoignition characteristics of aircraft-type fuels. Comb. Flame, 46, 283–300.
- Sutton, G.P. 2003a. History of liquid propellant rocket engines in the United States. J. Propuls. Power., 19, 978–1007.
- Sutton, G.P. 2003b. History of liquid-propellant rocket engines in Russia, formerly the Soviet Union. J. Propuls. Power., 19, 1008–1037.
- Volkmann, J.C., McLeod, J.M., and Claflin, S.E. 1991. Investigation of throat film coolant for advanced LOX/RP-1 thrust chambers. Proc. 27th AIAA/ASME/SAE/ASEE Jt. Propuls. Conf. Exhib, AIAA, 91–1979.
- Wooseok, S., Dohun, K., Keonwoogn, L., Bongchul, S., Sangho, K., and Jaye, K. 2016. Effects of kerosene heating on dynamic characteristics of GOx/kerosene combustor. Acta Astronaut, 126, 528–535.
- Zhukov, V.P., Sechenov, V.A., and Starikovskiy, A.Y. 2014. Autoignition of kerosene(Jet-A)/air mixtures behind reflected shock waves. Fuel, 126, 169–176.