References
- Bilger, R. W. 1989. The structure of turbulent nonpremixed flames. Symp. (Int.) Combust. 22 (1):475–88. doi:10.1016/S0082-0784(89)80054-2.
- Bird, R. B., W. E. Stewart, and E. N. Lightfoot. 2007. Transport phenomena, revised. 2nd ed. New York, USA, John Wiley & Sons, Inc.
- Cavaliere, D. E., J. Kariuki, and E. Mastorakos. 2013. A comparison of the blow-off behaviour of swirl-stabilized premixed, non-premixed and spray flames. Flow, Turbul. Combust. 91 (2):347–72. doi:10.1007/s10494-013-9470-z.
- Chrigui, M., J. Gounder, A. Sadiki, A. R. Masri, and J. Janicka. 2012. Partially premixed reacting acetone spray using LES and FGM tabulated chemistry. Combust. Flame The Combustion Institute 159 (8):2718–41. doi:10.1016/j.combustflame.2012.03.009.
- Dagan, Y., E. Arad, and Y. Tambour. 2015. On the dynamics of spray flames in turbulent flows. Proc. Combust. Inst. The Combustion Institute 35 (2):1657–65. doi:10.1016/j.proci.2014.07.044.
- Demétrio, M. J. E. 2013. Análise de mecanismos cinéticos para a combustão de etanol. Universidade Federal de Santa Catarina. http://www.bu.ufsc.br/teses/PEMC1673-D.pdf.
- Denev, J. A., J. Fröhlich, and H. Bockhorn. 2009. Large eddy simulation of a swirling transverse jet into a crossflow with investigation of scalar transport. Phys. Fluids 21 (1):015101. doi:10.1063/1.3054148.
- Düwel, I., H.-W. Ge, H. Kronemayer, R. Dibble, E. Gutheil, C. Schulz, and J. Wolfrum. 2007. Experimental and numerical characterization of a turbulent spray flame. Proc. Combust. Inst. 31 (II):2247–55. doi:10.1016/j.proci.2006.07.111.
- Eiberger, F., P. Habisreuther, N. Zarzalis, and F. Turrini (2015) Evaluation of the turbulence radiation interaction and the validity of the optically thin fluid approximation in a high turbulent premixed methane flame. ASME Turbo Expo 2015: Turbine technical conference and exposition, Montreal, Quebec, Canada: ASME, p. V05CT17A006. June 15–19,2015. doi: 10.1115/GT2015-42478.
- Falese, M. 2013. A study of the effects of bifurcations in swirling flows using Large Eddy Simulation and mesh adaptation. Toulouse, France: Institut National Polytechnique de Toulouse - INPT. https://tel.archives-ouvertes.fr/tel-00920462.
- Fiorina, B., O. Gicquel, L. Vervisch, S. Carpentier, and N. Darabiha. 2005. Premixed turbulent combustion modeling using tabulated detailed chemistry and PDF. Proc. Combust. Inst. The Combustion Institute 30 (1):867–74. doi:10.1016/j.proci.2004.08.062.
- Fukumasu, N. K., J. I. Yanagihara, and G. C. Krieger Filho. 2015. Influence of fuel injection frequency on droplet dispersion in ethanol pulsed spray flames. Appl. Therm. Eng. 81:198–209. doi:10.1016/j.applthermaleng.2015.02.019.
- Galeazzo, F. C. C., G. Donnert, C. Cárdenas, J. Sedlmaier, P. Habisreuther, N. Zarzalis, C. Beck, and W. Krebs. 2013. Computational modeling of turbulent mixing in a jet in crossflow. Int. J. Heat Fluid Flow 41:55–65. doi:10.1016/j.ijheatfluidflow.2013.03.012.
- Galeazzo, F. C. C., N. K. Fukumasu, J. A. Denev, and G. C. Krieger Filho (2017) Experimental and numerical investigation of a swirl stabilized, lifted ethanol spray flame. Tenth mediterranean combustion symposium, Naples, Italy, pp. 1–12.
- Ge, H. W., and E. Gutheil. 2008. Simulation of a turbulent spray flame using coupled PDF gas phase and spray flamelet modeling. Combust. Flame 153 (1–2):173–85. doi:10.1016/j.combustflame.2007.10.019.
- Giusti, A., and E. Mastorakos. 2017. Detailed chemistry LES/CMC simulation of a swirling ethanol spray flame approaching blow-off. Proc. Combust. Inst. Elsevier Inc. 36 (2):2625–32. doi:10.1016/j.proci.2016.06.035.
- Goodwin, D. G., H. K. Moffat, and R. L. Speth. 2017. Cantera: An object-oriented software toolkit for chemical kinetics, thermodynamics, and transport processes, Pasadena, California.
- Gounder, J. D., A. Kourmatzis, and A. R. Masri. 2012. Turbulent piloted dilute spray flames: Flow fields and droplet dynamics. Combust. Flame The Combustion Institute. 159 (11):3372–97. doi:10.1016/j.combustflame.2012.07.014.
- Hung, D. L. S., et al. 2008. Gasoline fuel injector spray measurement and characterization - A new SAE J2715 recommended practice. SAE Int. J. Fuels Lubr. 1 (1):2008–01–1068. doi:10.4271/2008-01-1068.
- Jasak, H., H. G. Weller, and A. D. Gosman. 1999. High resolution NVD differencing scheme for arbitrarily unstructured meshes. Int. J. Numer. Methods Fluids 31 (2):431–49. doi:10.1002/(SICI)1097-0363(19990930)31:2<431::AID-FLD884>3.0.CO;2-T.
- Kathrotia, T., U. Riedel, A. Seipel, K. Moshammer, and A. Brockhinke. 2012. Experimental and numerical study of chemiluminescent species in low-pressure flames. Appl. Phys. B 107 (3):571–84. doi:10.1007/s00340-012-5002-0.
- Ma, L., and D. Roekaerts. 2017. Numerical study of the multi-flame structure in spray combustion. Proc. Combust. Inst. Elsevier Inc. 36 (2):2603–13. doi:10.1016/j.proci.2016.06.015.
- Masri, A. R., and J. D. Gounder. 2010. Turbulent spray flames of acetone and ethanol approaching extinction. Combust. Sci. Technol. 182 (4–6):702–15. doi:10.1080/00102200903467754.
- Nicoud, F., and F. Ducros. 1999. Subgrid-scale stress modelling based on the square of the velocity gradient tensor. Flow, Turbul. Combust. 62 (3):183–200. doi:10.1023/A:1009995426001.
- Parra-Santos, T., R. Perez, R. Z. Szasz, A. N. Gutkowski, and F. Castro (2016) Numerical modelling of swirling diffusive flames. In EPJ web of conferences 114, Edited by P. Dančová and M. Veselý, 02087. Prague, Czech Republic, doi: 10.1051/epjconf/201611402087.
- Prathap, C., G. F. C Cunha; K. Plamen, H. Peter, Z, Nikolaos, B. Christian, K, Werner, W. Bernhard 2012. Analysis of NOX formation in an axially staged combustion system at elevated pressure conditions. J. Eng. Gas Turbines Power 134 (3):031507. doi:10.1115/1.4004720.
- Ranz, W. E., and W. R. Marshall. 1952. Evaporation from drops. Chem. Eng. Prog. 48:141.
- Reitz, R. D., and R. Diwakar. 1987. Structure of high-pressure fuel sprays. SAE Tech. Paper Ser. SAE International: Paper number 870598. doi:10.4271/870598.
- Syred, N. 2006. A review of oscillation mechanisms and the role of the precessing vortex core (PVC) in swirl combustion systems. Prog. Energy Combust. Sci. 32 (2):93–161. doi:10.1016/j.pecs.2005.10.002.
- van Oijen, J. A., and L. P. H. de Goey. 2000. Modelling of premixed laminar flames using flamelet-generated manifolds. Combust. Sci. Technol. 161 (May 2016):113–37. doi:10.1080/00102200008935814.
- van Oijen, J. A., A. Donini, R. J. M. Bastiaans, J. H. M. Ten Thije Boonkkamp, and L. P. H. de Goey. 2016. State-of-the-art in premixed combustion modeling using flamelet generated manifolds. Prog. Energy Combust. Sci. Elsevier Ltd. 57: 30–74. doi:10.1016/j.pecs.2016.07.001.
- Weller, H. G., G. Tabor, H. Jasak, and C. Fureby. 1998. A tensorial approach to computational continuum mechanics using object-oriented techniques. Comput. Phys. 12 (6):620–31. doi:10.1063/1.168744.
- Zeng, W., M. Xu, M. Zhang, Y. Zhang, and D. Cleary. 2010. Characterization of methanol and ethanol sprays from different DI injectors by using mie-scattering and laser induced fluorescence at potential engine cold-start conditions. SAE Tech. Paper Ser. doi:10.4271/2010-01-0602.
- Zuo, B., A. M. Gomes, and C. J. Rutland. 2000. Modelling superheated fuel sprays and vaporization. Int. J. Engine Res. 1 (4):321–36. doi:10.1243/1468087001545218.