The Optical Investigation on Initial Flame Developing Characteristics of Diesel Jet under Cold Start Conditions

References

• Broatch, A., S. Ruiz, X. Margot, and A. Gil. 2010a. Methodology to estimate the threshold incylinder temperature for self-ignition of fuel during cold start of diesel engines. Energy 35 (5):2251–60. doi:10.1016/j.energy.2010.02.012.
   Web of Science ®Google Scholar
• Broatch, A., S. Ruiz, X. Margot, and A. Gil. 2010b. Methodology to estimate the threshold in-cylinder temperature for self-ignition of fuel during cold start of diesel engines. Energy 35 (5):2251–60. doi:10.1016/j.energy.2010.02.012.
   Web of Science ®Google Scholar
• Broatch, A., S. Ruiz, X. Margot, and A. Gil. 2010c. Methodology to estimate the threshold in-cylinder temperature for self-ignition of fuel during cold start of diesel engines. Energy 35:2251–60. doi:10.1016/j.energy.2010.02.012.
   Web of Science ®Google Scholar
• Chartier, C., U. Aronsson, Ö. Andersson, and R. Egnell. 2009. Effect of injection strategy on cold start performance in an optical light-duty DI diesel engine. SAE Trans. J. Eng. 2 (2):431–42.
   Google Scholar
• Chen, L., Z. Liu, Y. Lin, and C. Zhang. 2016. Different spray droplet evaporation models for non-ideal multi-component fuels with experimental validation. Int. J. Heat Mass Transf. 94:292–300. doi:10.1016/j.ijheatmasstransfer.2015.11.017.
   Web of Science ®Google Scholar
• Deng, Y., J. Cui, E. Jiaqiang, B. Zhang, X. Zhao, Z. Zhang, and D. Han. 2017. Investigations on the temperature distribution of the diesel particulate filter in the thermal regeneration process and its field synergy analysis. Appl. Therm. Eng. 123:92–102. doi:10.1016/j.applthermaleng.2017.05.072.
   Web of Science ®Google Scholar
• Du, W., Q. Zhang, Z. Zhang, J. Lou, and W. Bao. 2018. Effects of injection pressure on ignition and combustion characteristics of impinging diesel spray. Appl. Energy 226:1163–68. doi:10.1016/j.apenergy.2018.06.032.
   Web of Science ®Google Scholar
• Fasolo, B., A. Doisy, A. Dupont, and F. Lavoisier. 2005. Combustion system optimization of a new 2 liter diesel engine for EURO IV. SAE Technical Paper, 2005-01-0652.
   Google Scholar
• Geng, L., Y. Wang, J. Wang, Y. Wei, and C. Lee. 2019. Numerical simulation of the influence of fuel temperature and injection parameters on biodiesel spray characteristics. Energy Sci. Eng. doi:10.1002/ese3.429.
   PubMed Web of Science ®Google Scholar
• Han, D., K. Li, Y. Duan, H. Lin, and Z. Huang. 2017. Numerical study on fuel physical effects on the split injection processes on a common rail injection system. Energy Convers. Manage. 134:47–58. doi:10.1016/j.enconman.2016.12.026.
   Web of Science ®Google Scholar
• Han, Z., N. Henein, B. Nitu, and W. Bryzik. 2001. Diesel engine cold start combustion instability and control strategy. SAE Technical Paper, 2001-01-1237.
   Google Scholar
• Heeb, N., A. M. Forss, and P. Wilhelm. 2001. Comparison of methane, benzene and alkyl benzenes cold start emission data of EURO I and EURO II three-way catalyst passenger cars and light duty vehicles from time resolved exhaust gas analysis. Proceedings of 10th Transport and Air Pollution Symposium, 17–19. Boulder, Colorado.
   Google Scholar
• Henein, N., A. Zahdeh, M. Yassine, and W. Bryzik. 1992. Diesel engine cold starting: Combustion instability. SAE Technical Paper, 920005.
   Google Scholar
• Heywood, J. 1988. Internal combustion engine fundamentals. New York: McGraw-Hill.
   Google Scholar
• Hwang, J., Y. Park, C. Bae, J. Lee, and S. Pyo. 2015. Fuel temperature influence on spray and combustion characteristics in a constant volume combustion chamber (CVCC) under simulated engine operating conditions. Fuel 160:424–33. doi:10.1016/j.fuel.2015.08.004.
   Web of Science ®Google Scholar
• Kawamura, H., and S. Yamamoto. 1983. Improvement of diesel engine startability by ceramic glow plug start system (No. 830580). SAE Technical Paper.
   Google Scholar
• Kobayashi, A., A. Kurashima, and S. Endo. 1984. Analysis of cold start combustion in a direct injection diesel engine (No. 840106). SAE Technical Paper.
   Google Scholar
• Lee, C., Y. Wu, H. Wu, Z. Shi, L. Zhang, and F. Liu. 2019. The experimental investigation on the impact of toluene addition on low temperature ignition characteristics of diesel spray. Fuel 254:115580. doi:10.1016/j.fuel.2019.05.163.
   Web of Science ®Google Scholar
• Liu, F., Z. Zhang, H. Wu, Y. Li, Y. Ma, X. Li, and W. Du. 2017. An investigation on a diesel jet’s ignition characteristics under cold-start conditions. Appl. Therm. Eng. 121:511–19. doi:10.1016/j.applthermaleng.2017.04.133.
   Web of Science ®Google Scholar
• MacMillan, D., A. La Rocca, P. Shayler, M. Murphy, and I. G. Pegg. 2009. The effect of reducing compression ratio on the work output and heat release characteristics of a di diesel under cold start conditions. SAE Trans. J. Eng. 1 (1):794–803.
   Google Scholar
• Mendez, S., and B. Thirouard. 2008. Using multiple injection strategies in diesel combustion: Potential to improve emissions, noise and fuel economy tradeoff in low CR engines. SAE Trans. J. Fuels Lubr. 1 (1):662–74. doi:10.4271/2008-01-1329.
   Google Scholar
• Pacaud, P., H. Perrin, and O. Laget. 2008. Cold start on diesel engine: Is low compression ratio compatible with cold start requirements? SAE Trans. J. Eng. 1 (1):831–49.
   Google Scholar
• Pan, J., Z. Hu, H. Wei, M. Pan, and L. Zhou. April, 2019. Understanding strong knocking mechanism through high-strength optical rapid compression machines. Combust. Flame 202:1–15. doi: 10.1016/j.combustflame.2019.01.004.
   Web of Science ®Google Scholar
• Park, H., J. Shin, and C. Bae. 2017. Spray and combustion of diesel fuel under simulated cold-start conditions at various ambient temperatures. SAE Technical Paper 2017-24-0069.
   Google Scholar
• Park, Y., J. Hwang, C. Bae, K. Kim, J. Lee, and S. Pyo. 2015a. Effects of diesel fuel temperature on fuel flow and spray characteristics. Fuel 162:1–7. doi:10.1016/j.fuel.2015.09.008.
   Web of Science ®Google Scholar
• Park, Y., J. Hwang, C. Bae, K. Kim, J. Lee, and S. Pyo. 2015b. Effects of diesel fuel temperature on fuel flow and spray characteristics. Fuel 162:1–7. doi:10.1016/j.fuel.2015.09.008.
   Web of Science ®Google Scholar
• Pastor, J. V., V. Bermúdez, J. M. García-Oliver, and J. Z. Ramírez-Hernández. 2011. Influence of spray-glow plug configuration on cold start combustion for high-speed direct injection diesel engines. Energy 36 (9):5486–96. doi:10.1016/j.energy.2011.07.028.
   Web of Science ®Google Scholar
• Payri, F., A. Broatch, J. M. Salavert, and J. Martín. 2010. Investigation of diesel combustion using multiple injection strategies for idling after cold start of passenger-car engines. Exp. Therm Fluid Sci. 34 (7):857–65. doi:10.1016/j.expthermflusci.2010.01.014.
   Web of Science ®Google Scholar
• Peng, H., Y. Cui, L. Shi, and K. Deng. 2008. Effects of exhaust gas recirculation (EGR) on combustion and emissions during cold start of direct injection (DI) diesel engine. Energy 33 (3):471–79. doi:10.1016/j.energy.2007.10.014.
   Web of Science ®Google Scholar
• Perrin, H., J. P. Dumas, O. Laget, and B. Walter. 2010. Analysis of combustion process in cold operation with a low compression ratio diesel engine. SAE Technical Paper, 2010-01-1267.
   Google Scholar
• Reitz, R. D. 2013. Directions in internal combustion engine research. Combust. Flame 160 (1):1–8. doi:10.1016/j.combustflame.2012.11.002.
   Web of Science ®Google Scholar
• Roberts, A., R. Brooks, and P. Shipway. 2014. Internal combustion engine cold-start efficiency: A review of the problem, causes and potential solutions. Energy Convers. Manage. 82:327–50. doi:10.1016/j.enconman.2014.03.002.
   Web of Science ®Google Scholar
• Roy, M. M., J. Calder, W. Wang, A. Mangad, and F. Diniz. 2016. Cold start idle emissions from a modern Tier-4 turbo-charged diesel engine fueled with diesel-biodiesel, diesel-biodiesel-ethanol, and diesel-biodiesel-diethyl ether blends. Appl. Energy 180:52–65. doi:10.1016/j.apenergy.2016.07.090.
   Web of Science ®Google Scholar
• Scharnweber, D., and L. O. Hoppie. 1985. Hypergolic combustion in an internal combustion engine. SAE Technical Paper.
   Google Scholar
• Shi, Z., C. Lee, H. Wu, Y. Wu, L. Zhang, and F. Liu. 2019. Optical diagnostics of low-temperature ignition and combustion characteristics of diesel/kerosene blends under cold-start conditions. Appl. Energy 251:113307. doi:10.1016/j.apenergy.2019.113307.
   Web of Science ®Google Scholar
• Siebers, D. L., and B. Higgins. 2001. Flame lift-off on direct-injection diesel sprays under quiescent conditions. SAE Technical Paper.
   Google Scholar
• Su, L., X. Li, X. He, and F. Liu. 2015. Experimental research on the diffusion flame formation and combustion performance of forced swirl combustion system for DI diesel engines. Energy Convers. Manage. 106:826–34. doi:10.1016/j.enconman.2015.10.027.
   Web of Science ®Google Scholar
• Tinprabath, P., C. Hespel, S. Chanchaona, and F. Foucher. 2016a. Impact of cold conditions on diesel injection processes of biodiesel blends. Renewable Energy 96:270–80. doi:10.1016/j.renene.2016.04.062.
   Web of Science ®Google Scholar
• Tinprabath, P., C. Hespel, S. Chanchaona, and F. Foucher. 2016b. Impact of cold conditions on diesel injection processes of biodiesel blends. Renewable Energy 96:270–80. doi:10.1016/j.renene.2016.04.062.
   Web of Science ®Google Scholar
• Trapy, J. D., and P. Damiral. 1990. An investigation of lubricating system warm-up for the improvement of cold start efficiency and emissions of SI automotive engines. SAE Technical Paper, 902089.
   Google Scholar
• Wang, Z., H. Ding, M. L. Wyszynski, J. Tian, and H. Xu. 2015. Experimental study on diesel fuel injection characteristics under cold start conditions with single and split injection strategies. Fuel Process. Technol. 131:213–22. doi:10.1016/j.fuproc.2014.10.003.
   Web of Science ®Google Scholar
• Wang, Z., Y. Li, C. Wang, H. Xu, and M. L. Wyszynski. 2016. Near-nozzle microscopic characterization of diesel spray under cold start conditions with split injection strategy. Fuel 181:366–75. doi:10.1016/j.fuel.2016.04.103.
   Web of Science ®Google Scholar
• Weilenmann, M., P. Soltic, C. Saxer, A. M. Forss, and N. Heeb. 2005. Regulated and nonregulated diesel and gasoline cold start emissions at different temperatures. Atmos. Environ. 39 (13):2433–41. doi:10.1016/j.atmosenv.2004.03.081.
   Web of Science ®Google Scholar
• Will, F., and A. Boretti. 2011. New method to warm up lubricating oil to improve the fuel efficiency during cold start. SAE Technical Paper, 2011-01-0318.
   Google Scholar
• Wu, H., L. Wang, Y. Wu, B. Sun, Z. Zhao, and F. Liu. 2019. Spray performance of air-assisted kerosene injection in a constant volume chamber under various in-cylinder GDI engine conditions. Appl. Therm. Eng. 150:762–69. doi:10.1016/j.applthermaleng.2019.01.014.
   Web of Science ®Google Scholar
• Zhang, B., E. Jiaqiang, J. Gong, W. Yuan, X. Zhao, and W. Hu. 2017. Influence of structural and operating factors on performance degradation of the diesel particulate filter based on composite regeneration. Appl. Therm. Eng. 121:838–52. doi:10.1016/j.applthermaleng.2017.04.155.
   Web of Science ®Google Scholar
• Zhong, L., S. Gruenewald, N. Henein, and W. Bryzik. 2007. Lower temperature limits for cold starting of diesel engine with a common rail fuel injection system. SAETechnicalPaper, 2007-01-0934.
   Google Scholar