References
- Adouane, B., P. Hoppesteyn, W. Jong, and M. Wel. 2002. Gas turbine combustor for biomass derived LCV gas, a first approach towards fuel-NOx modelling and experimental validation. Appl. Therm. Eng. 22:959–70. doi:10.1016/S1359-4311(02)00013-3.
- Al-Halbouni, A., K. Görner, and H. Rahms. 2007. an efficient combustion concept for low calorific gases. RE&PQJ 1 (5):45–50. doi:10.24084/repqj05.213.
- Amani, E., P. Rahdan, and S. Pourvosoughi. 2019. Multi-objective optimizations of air partitioning in a gas turbine combustor. Appl. Therm. Eng. 148:1292–302. doi:10.1016/j.applthermaleng.2018.12.015.
- Amaro, J., A. Mendiburu, and J. Carvalho. 2019. Thermodynamic study of syngas combustion in gas microturbines with regeneration composed with metallic and ceramic materials. Appl. Therm. Eng. 159:1–12.
- Bidi, M., R. Hosseini, and M. Nobari. 2008. Numerical analysis of methane–air combustion considering radiation effect. Energy Convers. Manage. 49:3634–47. doi:10.1016/j.enconman.2008.07.010.
- Francisco, R., F. Rua, M. Cost, R. Catapan, and A. Oliveira. 2009. Combustion characteristics of gaseous fuels with low calorific value in a porous burner. Proc. Eur. Combust. 4:1–6.
- Giles, D., S. Som, and S. Aggarwal. 2006. NOx emission characteristics of counterflow syngas diffusion flames with airstream dilution. Fuel 85:1729–42. doi:10.1016/j.fuel.2006.01.027.
- Góral, J., and M. Rozpondek. 2008. Charakterystyki dyfuzyjnych palników gazowych dla hutniczych urządzeń cieplnych. Hutnik 75 (5):257–61.
- Góral, J., and M. Rozpondek. 2013. Techniczne aspekty projektowania palników do spalania niskokalorycznych gazów odpadowych. Hutnik 80 (3):206–11.
- Karyeyen, S., and M. Ilbas. 2018. Experimental and numerical analysis of turbulent premixed combustion of low calorific value coal gases in a generated premixed burner. Fuel 220:586–98. doi:10.1016/j.fuel.2018.02.052.
- Kim, W., and T. Park. 2018. Non-premixed lean flame characteristics depending on air hole positions in a baffled micro combustor. Appl. Therm. Eng. 129:431–45. doi:10.1016/j.applthermaleng.2017.10.064.
- Liu, K., and V. Sanderson. 2013. The influence of changes in fuel calorific value to combustion performance for Siemens SGT-300 dry low emission combustion system. Fuel 103:239–46. doi:10.1016/j.fuel.2012.07.068.
- Piestrzyński, A. 1996. Monografia KGHM Polska Miedź. Wyd. CBPM. Lubin Chap. 6:934–53.
- Seweryński, B. 1974. Quality requirements wchich must be met by flotation concentrates depending on the metallurgical technologies. Physicochem. Probl. Miner. Process. 8 (1):99–105.
- Song, F., Z. Wen, Z. Dong, E. Wang, and X. Liu. 2017. Ultra-low calorific gas combustion in a gradually-varied porous burner with annular heat recirculation. Energy 119:497–503. doi:10.1016/j.energy.2016.12.077.
- Szewczyk, D., and P. Skotnicki. 2012. Zalety technologii wysokotemperaturowego spalania objętościowego w procesach utylizacji gazów odpadowych i niskokalorycznych. Piece Przemyslowe I Kotly 7:31–39.
- Weißner, M., F. Beger, M. Schüttenhelm, and G. Tallu. 2019. Lean-burn CNG engine with ignition chamber: From the idea to a running engine. Combust. Engines 176:3–9.
- Witton, J., E. Noordally, and J. M. Przybylski. 2003. Clean catalytic combustion of low heat value fuels from gasification processes. Chem.l Eng. J. 91:115–21. doi:10.1016/S1385-8947(02)00144-4.
- Yan, B., H. Wong, Z. Zheng, Y. Qin, and H. Yao. 2018. The effect of combustion chamber geometry on in-cylinder flow and combustion process in a stoichiometric operation natural gas engine with EGR. Appl. Therm. Eng. 129:199–211. doi:10.1016/j.applthermaleng.2017.09.067.
- Zuo, W., E. Jiaqiang, W. Hu, Y. Jin, and D. Han. 2017. Numerical investigations on combustion characteristics of H2/air premixed combustion in a micro elliptical tube combustor. Energy 126:1–12. doi:10.1016/j.energy.2017.03.011.