References
- Agarwal, A. K., A. P. Singh, R. K. Maurya, P. Chandra Shukla, A. Dhar, and D. K. Srivastava. 2018. Combustion characteristics of a common rail direct injection engine using different fuel injection strategies. Int. J. Therm. Sci. 134:475–84. doi:https://doi.org/10.1016/j.ijthermalsci.2018.07.001.
- Assanis, D. N., Z. S. Filipi, S. B. Fiveland, and M. Syrimis. 2003. A predictive ignition delay correlation under steady-state and transient operation of a direct injection diesel engine. J. Eng. Gas Turbines Power 125 (2):450–57. doi:https://doi.org/10.1115/1.1563238.
- Finesso, R., and E. Spessa. 2014. Ignition delay prediction of multiple injections in diesel engines. Fuel 119:170–90. doi:https://doi.org/10.1016/j.fuel.2013.11.040.
- Garzón, N. A. N., A. A. M. Oliveira, and E. Bazzo. 2019. An ignition delay correlation for compression ignition engines fueled with straight soybean oil and diesel oil blends. Fuel 257:116050. doi:https://doi.org/10.1016/j.fuel.2019.116050.
- Hamilton, L., D. Luning Prak, and J. Cowart. 2014. Predicting the physical and chemical ignition delays in a military diesel engine running n-hexadecane fuel. J. Eng. Gas Turbines Power 136 (7):071505. doi:https://doi.org/10.1115/1.4026657.
- Han, D., A. M. Ickes, D. N. Assanis, Z. Huang, and S. V. Bohac. 2010. Attainment and load extension of high-efficiency premixed low-temperature combustion with dieseline in a compression ignition engine. Energy Fuels 24 (6):3517–25. doi:https://doi.org/10.1021/ef100269c.
- Han, D., A. M. Ickes, S. V. Bohac, Z. Huang, and D. N. Assanis. 2011. Premixed low-temperature combustion of blends of diesel and gasoline in a high speed compression ignition engine. Proc. Combust. Inst. 33 (2):3039–46. doi:https://doi.org/10.1016/j.proci.2010.07.045.
- Han, D., J. Zhai, and Z. Huang. 2019b. Autoignition of n-hexane, cyclohexane, and methylcyclohexane in a constant volume combustion chamber. Energy Fuels 33 (4):3576–83. doi:https://doi.org/10.1021/acs.energyfuels.9b00003.
- Han, D., Y. Duan, and J. Zhai. 2019a. Autoignition comparison of n-dodecane/benzene and n-dodecane/toluene blends in a constant volume combustion chamber. Energy Fuels 33 (6):5647–54.
- Hernandez, J. J., J. Sanz-Argent, J. M. Carot, and J. M. Jabaloyes. 2010. Ignition delay time correlations for a diesel fuel with application to engine combustion modelling. Int. J. Engine Res. 11 (3):199–206. doi:https://doi.org/10.1243/14680874JER06209.
- Ickes, A. M., S. V. Bohac, and D. N. Assanis. 2009. Effect of fuel cetane number on a premixed diesel combustion mode. Int. J. Engine Res. 10 (4):251–63. doi:https://doi.org/10.1243/14680874JER03809.
- Jacobs, T. J., and D. N. Assanis. 2007. The attainment of premixed compression ignition low-temperature combustion in a compression ignition direct injection engine. Proc. Combust. Inst. 31 (2):2913–20. doi:https://doi.org/10.1016/j.proci.2006.08.113.
- Jia, T.-M., Y.-S. Yu, and G.-X. Li. 2017. Experimental investigation of effects of super high injection pressure on diesel spray and induced shock waves characteristics. Exp. Therm Fluid Sci. 85:399–408. doi:https://doi.org/10.1016/j.expthermflusci.2017.03.026.
- John, H. 1988. Internal combustion engine fundamentals. New York, NY: McGraw-Hill Science.
- Kim, D., J. Martz, and A. Violi. 2017. The relative importance of fuel oxidation chemistry and physical properties to spray ignition. SAE Int. J. Fuels Lubr. 10 (1):10–21. doi:https://doi.org/10.4271/2017-01-0269.
- Kim, K., D. Kim, Y. Jung, and C. Bae. 2013. Spray and combustion characteristics of gasoline and diesel in a direct injection compression ignition engine. Fuel 109:616–26. doi:https://doi.org/10.1016/j.fuel.2013.02.060.
- Köten, H., and A. S. Parlakyiğit. 2018. Effects of the diesel engine parameters on the ignition delay. Fuel 216:23–28. doi:https://doi.org/10.1016/j.fuel.2017.11.136.
- Liang, X., A. Zhong, Z. Sun, and D. Han. 2019. Autoignition of n-heptane and butanol isomers blends in a constant volume combustion chamber. Fuel 254:115638. doi:https://doi.org/10.1016/j.fuel.2019.115638.
- Liu, J., G. Li, and S. Liu. 2010. Influence of ethanol and cetane number (CN) improver on the ignition delay of a direct-injection diesel engine. Energy Fuels 25 (1):103–07. doi:https://doi.org/10.1021/ef101231k.
- Mancaruso, E., and B. M. Vaglieco. 2013. An experimental comparison of n-Heptane, RME and diesel fuel on combustion characteristics in a compression ignition engine. Fuel Process. Technol. 107:44–49. doi:https://doi.org/10.1016/j.fuproc.2012.11.006.
- Mathivanan, K., J. M. Mallikarjuna, and A. Ramesh. 2016. Influence of multiple fuel injection strategies on performance and combustion characteristics of a diesel fuelled HCCI engine – An experimental investigation. Exp. Therm Fluid Sci. 77:337–46. doi:https://doi.org/10.1016/j.expthermflusci.2016.05.010.
- Mayo, M. P., and A. L. Boehman. 2015. Ignition behavior of biodiesel and diesel under reduced oxygen atmospheres. Energy Fuels 29 (10):6793–803. doi:https://doi.org/10.1021/acs.energyfuels.5b01439.
- Ogawa, H., A. Morita, K. Futagami, and G. Shibata. 2018. Ignition delays in diesel combustion and intake gas conditions. Int. J. Engine Res. 19 (8):805–12. doi:https://doi.org/10.1177/1468087417731410.
- Park, H., C. Bae, and C. Ha. 2019. A comprehensive analysis of multiple injection strategies for improving diesel combustion process under cold-start conditions. Fuel 255:115762. doi:https://doi.org/10.1016/j.fuel.2019.115762.
- Rabl, S., T. J. Davies, A. P. Mcdougall, and R. F. Cracknell. 2015. Understanding the relationship between ignition delay and burn duration in a constant volume vessel at diesel engine conditions. Proc. Combust. Inst. 35 (3):2967–74. doi:https://doi.org/10.1016/j.proci.2014.05.054.
- Shi, Z., F. Liu, W. Shang, Y. Li, C. Sun, and M. Zhu. 2020. Numerical study on the influence of injection pressure on the ignition and combustion of n-dodecane spray at cold-start conditions. Fuel 264:116882. doi:https://doi.org/10.1016/j.fuel.2019.116882.
- Sogbesan, O., C. P. Garner, and M. H. Davy. 2018. Effects of intake-port throttling on combustion behaviour in diesel low-temperature combustion. Int. J. Engine Res. 19 (8):827–38. doi:https://doi.org/10.1177/1468087417732881.
- Somers, K. P., H. J. Curran, U. Burke, C. Banyon, H. M. Hakka, F. Battin-Leclerc, P.-A. Glaude, S. Wakefield, and R. F. Cracknell. 2018. The importance of endothermic pyrolysis reactions in the understanding of diesel spray combustion. Fuel 224:302–10. doi:https://doi.org/10.1016/j.fuel.2018.02.173.
- Voice, A. K., P. Kumar, and Y. Zhang. 2018. Effect of fuel reactivity on ignitability and combustion phasing in a heavy-duty engine simulation for mixing-controlled and partially premixed combustion. ASME. J. Eng. Gas Turbines Power 140 (4):042801. doi:https://doi.org/10.1115/1.4038015.
- Wei, H., W. Zhao, Z. LU, and L. Zhou. 2019. Effects of oxygen concentrations on the ignition and quasi-steady processes of n-heptane spray flames using large eddy simulation. Fuel 241:786–801. doi:https://doi.org/10.1016/j.fuel.2018.12.097.
- Woschni, G. 1967. A universally applicable equation for the instantaneous heat transfer coefficient in the internal combustion engine. SAE Technical Paper 670931. doi:https://doi.org/10.4271/670931.
- Wuethrich, D., B. Von Rotz, K. Herrmann, and K. Boulouchos. 2019. Spray, combustion and soot of water-in-fuel (n-dodecane) emulsions in a constant volume combustion chamber; part II: effects of low temperature conditions and oxygen concentrations. Fuel 248:104–16. doi:https://doi.org/10.1016/j.fuel.2019.03.036.
- Yu, X., S. Yu, and M. Zheng. 2019. Hydrocarbon impact on NO to NO2 Conversion in a compression ignition engine under low-temperature combustion. Int. J. Engine Res. 20 (2):216–25. doi:https://doi.org/10.1177/1468087417745441.
- Zhang, Y., L. Zhan, Z. He, M. Jia, X. Leng, W. Zhong, Y. Qian, and X. Lu. 2019. An investigation on gasoline compression ignition (GCI) combustion in a heavy-duty diesel engine using gasoline/hydrogenated catalytic biodiesel blends. Appl. Therm. Eng. 160:113952. doi:https://doi.org/10.1016/j.applthermaleng.2019.113952.
- Zheng, Z., T. Badawy, N. Henein, and E. Sattler. 2013. Investigation of physical and chemical delay periods of different fuels in the ignition quality tester. J. Eng. Gas Turbines Power 135 (6):061501. doi:https://doi.org/10.1115/1.4023607.