References
- Anantharamaiah, N., H. V. Tafreshi, and B. Pourdeyhim. 2006. A study on flow through hydroentangling nozzles and their degradation. Chem. Eng. Sci. 61:4582–94. doi:https://doi.org/10.1016/j.ces.2006.01.038.
- Chen, Z. Z., X. Jin, A. Shimizu, E. J. Hihara, and C. B. Dang. 2017. Effects of the nozzle configuration on solar-powered variable geometry ejectors. Sol. Energy 150:275–86. doi:https://doi.org/10.1016/j.solener.2017.04.017.
- Deng, J. X., Z. L. Ding, H. M. Zhou, and Y. Q. Tan. 2009. Performance and wear characteristics of ceramic, cemented carbide, and metal nozzles used in coal-water-slurry boilers. Int. J. Refract Met. Hard Mater. 27:919–26. doi:https://doi.org/10.1016/j.ijrmhm.2009.05.007.
- Ding, Z. L., J. X. Deng, and J. F. Li. 2007. Wear surface studies on coal water slurry nozzles in industrial boilers. Mat. Des. 28:1531–38. doi:https://doi.org/10.1016/j.matdes.2006.02.020.
- Ding, Z. L., J. X. Deng, X. H. Zen, and J. P. Wu. 2008. Thermal erosion of WC-based cemented carbide nozzles by coal water slurry. Int. J. Refract Met. Hard Mater. 26:334–39. doi:https://doi.org/10.1016/j.ijrmhm.2007.08.006.
- Dziugys, A., and B. Peters. 2001. A new approach to detect the motion of two-dimensional ellipsoid particles. Int. J. Numer. Anal. Methods Geomechanics 25:1487–500. doi:https://doi.org/10.1002/nag.180.
- El-Taye, N. S. M., B. F. Yousif, and T. C. Yap. 2008. An investigation on worn surfaces of chopped glass fibre reinforced polyester through SEM observations. Tribol. Int. 41:331–40. doi:https://doi.org/10.1016/j.triboint.2007.07.007.
- Fu, W. N., Y. X. Li, Z. L. Liu, H. Q. Wu, and T. R. Wu. 2016. Numerical study for the influences of primary nozzle on steam ejector performance. Appl. Therm. Eng. 106:1148–56. doi:https://doi.org/10.1016/j.applthermaleng.2016.06.111.
- Gustavsson, M., and A. E. Almstedt. 2000. Two-fluid modelling of cooling-tube erosion in a fluidized bed. Chem. Eng. Sci. 55:867–79. doi:https://doi.org/10.1016/S0009-2509(99)00357-7.
- Han, Y., X. D. Wang, H. Sun, G. L. Zhang, L. X. Guo, and J. Y. Tu. 2019. CFD simulation on the boundary layer separation in the steam ejector and its influence on the pumping performance. Energy 167:469–83. doi:https://doi.org/10.1016/j.energy.2018.10.195.
- He, Y. R., W. B. Zhan, Y. H. Zhao, H. L. Lua, and I. Schlaberg. 2009. Prediction on immersed tubes erosion using two-fluid model in a bubbling fluidized bed. Chem. Eng. Sci. 64:3072–82. doi:https://doi.org/10.1016/j.ces.2009.03.033.
- Higman, C., and M. Van Der Burgt. 2003. Gasification. Butterworth-Heinemann: Gulf Publishing.
- Hu, C. S., K. Luo, S. L. Yang, S. Wang, and J. R. Fan. 2016. A comprehensive numerical investigation on the hydrodynamics and erosion characteristics in a pressurized fluidized bed with dense immersed tube bundles. Chem. Eng. Sci. 153:129–45. doi:https://doi.org/10.1016/j.ces.2016.07.023.
- Ju, F. D., H. P. Chen, H. P. Yang, X. H. Wang, S. H. Zhang, and D. C. Liu. 2010. Experimental study of a commercial circulated fluidized bed coal gasifier. Fuel Process. Technol. 91:818–22. doi:https://doi.org/10.1016/j.fuproc.2009.07.013.
- Lin, Z., X. W. Sun, T. C. Yu, Y. F. Zhang, Y. Li, and Z. C. Zhu. 2020. Gas–solid two-phase flow and erosion calculation of gate valve based on the CFD-DEM model. Powder Technol. 366:395–407. doi:https://doi.org/10.1016/j.powtec.2020.02.050.
- Liu, J. P., L. Wang, L. Jia, and X. L. Wang. 2017. The influence of the area ratio on ejector efficiencies in the MED-TVC desalination system. Desalination 413:168–75. doi:https://doi.org/10.1016/j.desal.2017.03.017.
- Liu, W. M., J. Xu, and X. D. Liu. 2016. Numerical study on collision characteristics for non-spherical particles in venturi powder ejector. Vacuum 131:285–92. doi:https://doi.org/10.1016/j.vacuum.2016.07.006.
- Liu, X. Y., Z. C. Chen, and L. S. Gao. 2019. Reducing the unburned combustible in the fly ash from a 45000 Nm3/h Ende Pulverized-Coal Gasifier by applying steam-solid ejector. Appl. Therm. Eng. 149:34–40. doi:https://doi.org/10.1016/j.applthermaleng.2018.11.074.
- Mu, L., K. A. Buist, J. A. M. Kuipers, and N. G. Deen. 2020. Scaling method of CFD-DEM simulations for gas-solid flows in risers. Chem. Eng. Sci. X6:100054.
- Oberkampf, W. L., and C. J. Roy. 2010. Verification and validation in scientific computing. New York City, NY, USA: Cambridge University Press.
- Palacz, M., J. Smolka, A. J. Nowak, K. Banasiak, and A. Hafner. 2017. Shape optimisation of a two-phase ejector for CO2 refrigeration systems. Int. J. Refrigeration 74:212–23. doi:https://doi.org/10.1016/j.ijrefrig.2016.10.013.
- Qiu, K. Z., F. Wu, S. L. Yang, K. Lu, and K. K. Lu. 2016. Heat transfer and erosion mechanisms of an immersed tube in a bubbling fluidized bed: A LES-DEM approach. Int. J. Therm. Sci. 100:357–71. doi:https://doi.org/10.1016/j.ijthermalsci.2015.10.001.
- Stroeven, P., H. He, and M. Stroeven. 2011. Discrete element modeling approach to assessment of granular properties in concrete. J. Zhejiang Univ.-Sci. A 12:335–44. doi:https://doi.org/10.1631/jzus.A1000223.
- Thongtip, T., and S. Aphornratana. 2017. An experimental analysis of the impact of primary nozzle geometries on the ejector performance used in R141b ejector refrigerator. Appl. Therm. Eng. 110:89–101. doi:https://doi.org/10.1016/j.applthermaleng.2016.08.100.
- Varga, S., J. Soares, R. Lima, and A. C. Oliveira. 2019. On the selection of a turbulence model for the simulation of steam ejectors using CFD. Int. J. Low-Carbon Technol. 12 (3):233–43. doi:https://doi.org/10.1093/ijlct/ctx007.
- Wang, B. Q., G. Q. Geng, A. V. Levy, and W. Mack. 1992. Erosivity of particles in circulating fluidized bed combustors. Wear 152:201–22. doi:https://doi.org/10.1016/0043-1648(92)90121-N.
- Wee, S. K., and Y. J. Yap. 2019. CFD study of sand erosion in pipeline. J. Pet. Sci. Eng. 176:269–78. doi:https://doi.org/10.1016/j.petrol.2019.01.001.
- Wiman, J., and A. E. Almstedt. 1997. Hydrodynamics, erosion and heat transfer in a pressurized fluidized bed: Influence of pressure, fluidization velocity, particle size and tube bank geometry. Chem. Eng. Sci. 52:2677–95. doi:https://doi.org/10.1016/S0009-2509(97)00096-1.
- Xu, J., X. D. Liu, and M. J. Pang. 2016. Numerical and experimental studies on transport properties of powder ejector based on double venturi effect. Vacuum 134:92–98. doi:https://doi.org/10.1016/j.vacuum.2016.10.007.
- Yan, J., N. Wen, L. Wang, X. B. Li, Z. Liu, and S. Y. Li. 2018. Optimization on ejector key geometries of a two-stage ejector-based multievaporator refrigeration system. Energy Convers. Manage. 175:142–50. doi:https://doi.org/10.1016/j.enconman.2018.08.110.
- Yao, L. M., Z. M. Xiao, J. B. Liu, Q. Zhang, and M. Wang. 2020. An optimized CFD-DEM method for fluid-particle coupling dynamics analysis. Int. J. Mech. Sci. 174:105–503. doi:https://doi.org/10.1016/j.ijmecsci.2020.105503.