References
- Bellan, J. 2020. Future challenges in the modelling and simulations of high-pressure flows. Combust. Sci. Technol. 192 (7):1199–218. doi:https://doi.org/10.1080/00102202.2020.1719404.
- Chakraborty, J. P., and D. Kunzru. 2012. High-pressure pyrolysis of n-heptane: Effect of initiators. J. Anal. Appl. Pyrol. 95:48. doi:https://doi.org/10.1016/j.jaap.2012.01.004.
- Jiang, R., G. Liu, and X. Zhang. 2013. Thermal cracking of hydrocarbon aviation fuels in regenerative cooling microchannels. Energ. Fuel 27 (5):2563. doi:https://doi.org/10.1021/ef400367n.
- Kee, R. J., F. M. Rupley, and J. A. Miller 1989. CHEMKIN-II: A fortran chemical kinetics package for the analysis of gas phase chemical kinetics, Rept. SAND89-8009B, Albuquerque, NM: Sandia National Lab.
- Kim, S. K., H. S. Choi, and Y. Kim. 2012. Thermodynamic modeling based on a generalized cubic equation of state for kerosene/LOx rocket combustion. Combust. Flame 159 (3):1351. doi:https://doi.org/10.1016/j.combustflame.2011.10.008.
- Li, Z., H. Wang, K. Jing, L. Wang, Y. Li, X. Zhang, and G. Liu. 2019. Kinetics and modeling of supercritical pyrolysis of endothermic hydrocarbon fuels in regenerative cooling channels. Chem. Eng. Sci. 207:202. doi:https://doi.org/10.1016/j.ces.2019.06.019.
- Reyniers, P. A., C. M. Schietekat, D. J. Van Cauwenberge, L. A. Vandewalle, K. M. Van Geem, and G. B. Marin. 2015. Necessity and feasibility of 3D simulations of steam cracking reactors. Ind. Eng. Chem. Res. 54 (49):12270. doi:https://doi.org/10.1021/acs.iecr.5b02477.
- Stephen, R. T. 2012. An introduction to combustion: Concepts and applications. 3rd ed. Boston: McGraw-Hill.
- Stewart, J., K. Brezinsky, and I. Glassman. 1998. Supercritical pyrolysis of decalin, tetralin, and n-decane at 700-800K. product distribution and reaction mechanism. Combust. Sci. Technol. 136 (1):373. doi:https://doi.org/10.1080/00102209808924178.
- Swithenbank, J., I. Poll, M. W. Vincent, and D. D. Wright 1973. Combustion design fundamentals. Symposium on Combustion, 14:627.
- Van Geem, K. M., R. Zajdlik, M. F. Reyniers, and G. B. Marin. 2007. Dimensional analysis for scaling up and down steam cracking coils. Chem. Eng. J. 134 (1–3):3. doi:https://doi.org/10.1016/j.cej.2007.03.065.
- Xu, K., and H. Meng. 2015. Modeling and simulation of supercritical-pressure turbulent heat transfer of aviation kerosene with detailed pyrolytic chemical reactions. Energ. Fuel 29 (7):4137. doi:https://doi.org/10.1021/acs.energyfuels.5b00097.
- Zhang, Y., P. A. Reyniers, C. M. Schietekat, K. M. Van Geem, G. B. Marin, W. L. Du, and F. Qian. 2017. Computational fluid dynamics-based steam cracking furnace optimization using feedstock flow distribution. AIChE J. 63 (7):3199. doi:https://doi.org/10.1002/aic.15669.
- Zhu, Y., B. Liu, and P. Jiang. 2013. Experimental and numerical investigations on n-decane thermal cracking at supercritical pressures in a vertical tube. Energ. Fuel 28 (1):466. doi:https://doi.org/10.1021/ef401924s.