References
- Chen, C., M. M. Ameen, H. Wei, C. Iyer, and S. Som, 2019. LES analysis on cycle-to-cycle variation of combustion process in a DISI engine. International Powertrains, Fuels & Lubricants Meeting, San Antonio, TX.
- Chen, C., P. Pal, M. M. Ameen, D. Feng, and H. Wei. 2020. Large-eddy simulation study on cycle-to-cycle variation of knocking combustion in a spark-ignition engine.Appl. Energy261:114447. doi:https://doi.org/10.1016/j.apenergy.2019.114447.
- Costa, M., Sementa, P., Sorge, U., Catapano, F. et al. 2015. Split injection in a GDI engine under knock conditions: an experimental and numerical investigation. SAE Technical Paper 2015-24-2432. doi:https://doi.org/10.4271/2015-24-2432.
- Dai, P., and Z. Chen. 2015. Supersonic reaction front propagation initiated by a hot spot in n -heptane/air mixture with multistage ignition. Combust.Flame 162 (11):4183–93. doi:https://doi.org/10.1016/j.combustflame.2015.08.002.
- Gamezo, V. N., A. M. Khokhlov, and E. S. Oran. 2001. The influence of shock bifurcations on shock-flame interactions and DDT. Combust.Flame 126 (4):1810–26. doi:https://doi.org/10.1016/S0010-2180(01)00291-7.
- Gamezo, V. N., A. M. Khokhlov, and E. S. Oran. 2002. Effects of wakes on shock-flame interactions and deflagration-to-detonation transition. Proc. Combust. Inst. 29 (2):2803–08. doi:https://doi.org/10.1016/S1540-7489(02)80342-X.
- Grandin, B. and Denbratt, I. 2002. The effect of knock on heat transfer in SI engines. SAE Technical Paper 2002-01-0238. doi:https://doi.org/10.4271/2002-01-0238.
- Gu, X. J., D. R. Emerson, and D. Bradley. 2003. Modes of reaction front propagation from hot spots. Combust.Flame 133 (1–2):63–74. doi:https://doi.org/10.1016/S0010-2180(02)00541-2.
- Jung, D., K. Sasaki, and N. Iida. 2017. Effects of increased spark discharge energy and enhanced in-cylinder turbulence level on lean limits and cycle-to-cycle variations of combustion for SI engine operation. Appl. Energy 205:1467–77. doi:https://doi.org/10.1016/j.apenergy.2017.08.043.
- Kim, M., Y. Kim, J. Kim, and H. H. Song. 2019. Development of quasi-dimensional turbulence model for spark-ignition engine with physical analysis of tumble: Energy-based tumble model focusing on energy intake and turbulence production. Appl. Energy 252:113455. doi:https://doi.org/10.1016/j.apenergy.2019.113455.
- Koszarowski, T. 2015. Effects of the injection strategy on the mixture formation and combustion characteristics in a DISI (direct injection spark ignition) optical engine. Energy 93:1758–68. doi:https://doi.org/10.1016/j.energy.2015.10.058.
- Kuroki, T., Shima, Y., Ono, Y., and Serizawa, T. 2019. Evaluation of cycle variation of SWACER-like knocking using 3D SI combustion simulation. SAE Technical Paper 2019-01-2208. doi:https://doi.org/10.4271/2019-01-2208.
- Lattimore, T., C. Wang, H. Xu, M. L. Wyszynski, and S. Shuai. 2016. Investigation of EGR Effect on Combustion and PM Emissions in a DISI Engine. Appl. Energy 161:256–67. doi:https://doi.org/10.1016/j.apenergy.2015.09.080.
- Li, T., Y. Gao, J. Wang, and Z. Chen. 2014. The miller cycle effects on improvement of fuel economy in a highly boosted, high compression ratio, direct-injection gasoline engine: EIVC vs. LIVC. Energ. Convers. Manage 79:59–65. doi:https://doi.org/10.1016/j.enconman.2013.12.022.
- Lim, G., S. Lee, C. Park, Y. Choi, and C. Kim. 2014. Effect of ignition timing retard strategy on NOx reduction in hydrogen-compressed natural gas blend engine with increased compression ratio. Int. J. Hydrogen Energy 39 (5):2399–408. doi:https://doi.org/10.1016/j.ijhydene.2013.11.131.
- Liu, Y.-D., M. Jia, M.-Z. Xie, and B. Pang. 2012. Enhancement on a skeletal kinetic model for primary reference fuel oxidation by using a semidecoupling methodology. Energy & Fuels 26 (12):7069–83. doi:https://doi.org/10.1021/ef301242b.
- Luong, M. B., G. H. Yu, S. H. Chung, and C. S. Yoo. 2017. Ignition of a lean PRF/air mixture under RCCI/SCCI conditions: Chemical aspects. Proc. Combust. Inst. 36 (3):3587–96. doi:https://doi.org/10.1016/j.proci.2016.06.076.
- Marseglia, G., M. Costa, F. Catapano, P. Sementa, and B. M. Vaglieco. 2017. Study about the link between injection strategy and knock onset in an optically accessible multi-cylinder GDI engine. Energ. Convers. Manage 134:1–19. doi:https://doi.org/10.1016/j.enconman.2016.12.012.
- Menon, S., and W. H. Calhoon, 1996. Subgrid mixing and molecular transport modeling in a reacting shear layer. Symposium (International) on Combust. 26, 59–66, Pittsburgh.
- Misdariis, A., O. Vermorel, and T. Poinsot. 2015. LES of knocking in engines using dual heat transfer and two-step reduced schemes. Combust. Flame 162 (11):4304–12. doi:https://doi.org/10.1016/j.combustflame.2015.07.023.
- Pedrozo, V. B., and H. Zhao. 2018. Improvement in high load ethanol-diesel dual-fuel combustion by Miller cycle and charge air cooling. Appl. Energy 210:138–51. doi:https://doi.org/10.1016/j.apenergy.2017.10.092.
- Qi, C., P. Dai, H. Yu, and Z. Chen. 2017. Different modes of reaction front propagation in n-heptane/air mixture with concentration non-uniformity. Proc. Combust. Inst. 36 (3):3633–41. doi:https://doi.org/10.1016/j.proci.2016.06.086.
- Qi, C., and Z. Chen. 2017. Effects of temperature perturbation on direct detonation initiation. Proc. Combust. Inst. 36 (2): 2743-2751. doi:https://doi.org/10.1016/j.proci.2016.06.093.
- Robert, A., S. Richard, O. Colin, L. Martinez, and L. D. Francqueville. 2015a. LES prediction and analysis of knocking combustion in a spark ignition engine. Proc. Combust. Inst. 79 (3):59–65. doi:https://doi.org/10.1016/j.proci.2014.05.154.
- Robert, A., S. Richard, O. Colin, and T. Poinsot. 2015b. LES study of deflagration to detonation mechanisms in a downsized spark ignition engine. Combust.Flame 162 (7):2788–807. doi:https://doi.org/10.1016/j.combustflame.2015.04.010.
- Senecal, P., Pomraning, E., Richards, K., Briggs, T. et al. 2003. Multi-dimensional modeling of direct-injection diesel spray liquid length and flame lift-off length using CFD and parallel detailed chemistry. SAE Technical Paper 2003-01-1043. doi:https://doi.org/10.4271/2003-01-1043.
- Su, J., M. Xu, T. Li, Y. Gao, and J. Wang. 2014. Combined effects of cooled EGR and a higher geometric compression ratio on thermal efficiency improvement of a downsized boosted spark-ignition direct-injection engine. Energy Convers. Manage. 78:65–73. doi:https://doi.org/10.1016/j.enconman.2013.10.041.
- Talei, M., and E. R. Hawkes. 2015. Ignition in compositionally and thermally stratified n-heptane/air mixtures: A direct numerical simulation study. Proc Combust Inst 35 (3):3027–35. doi:https://doi.org/10.1016/j.proci.2014.09.006.
- Teodosio, L., D. Pirrello, F. Berni, V. De Bellis, R. Lanzafame, and A. D’Adamo. 2018. Impact of intake valve strategies on fuel consumption and knock tendency of a spark ignition engine. Appl. Energy 216:91–104. doi:https://doi.org/10.1016/j.apenergy.2018.02.032.
- Wang, C., F. Zhang, E. Wang, C. Yu, H. Gao, B. Liu, Z. Zhao, and C. Zhao. 2019. Experimental study on knock suppression of spark-ignition engine fuelled with kerosene via water injection. Appl. Energy 242:248–59. doi:https://doi.org/10.1016/j.apenergy.2019.03.123.
- Wang, C., S. Zeraati-Rezaei, L. Xiang, and H. Xu. 2017a. Ethanol blends in spark ignition engines: RON, octane-added value, cooling effect, compression ratio, and potential engine efficiency gain. Appl. Energy 191:603–19. doi:https://doi.org/10.1016/j.apenergy.2017.01.081.
- Wang, Y., H. Wei, L. Zhou, X. Zhang, and L. Zhong. 2020b. Effects of reactivity inhomogeneities on knock combustion in a downsized spark-ignition engine. Fuel 278:118317. doi:https://doi.org/10.1016/j.fuel.2020.118317.
- Wang, Y., Wei, H., Zhou, L., Li, Y. et al. 2020. Effect of injection strategy on the combustion and knock in a downsized gasoline engine with large eddy simulation. SAE Technical Paper 2020-01-0244. doi:https://doi.org/10.4271/2020-01-0244.
- Wang, Z., F. Li, and Y. Wang. 2017b. A generalized kinetic model with variable octane number for engine knock prediction. Fuel 188:489–99. doi:https://doi.org/10.1016/j.fuel.2016.10.067.
- Wang, Z., H. Liu, and R. D. Reitz. 2017c. Knocking combustion in spark-ignition engines. Progress in Energy and Combustion Science 61:78–112. doi:https://doi.org/10.1016/j.pecs.2017.03.004.
- Wang, Z., X. U. Yaqi, and J. X. Wang. 2014. Suppression of super-knock in TC-GDI engine using two-stage injection in intake stroke(TSII). Science China Technological Sciences 57 (1):80–85. doi:https://doi.org/10.1007/s11431-013-5374-3.
- Wei, H., A. Shao, J. Hua, L. Zhou, and D. Feng. 2018. Effects of applying a Miller cycle with split injection on engine performance and knock resistance in a downsized gasoline engine. Fuel 214:98–107. doi:https://doi.org/10.1016/j.fuel.2017.11.006.
- Wei, H., T. Zhu, G. Shu, L. Tan, and Y. Wang. 2012. Gasoline engine exhaust gas recirculation – A review. Appl. Energy 99:534–44.
- Yoo, C. S., Z. Luo, T. Lu, H. Kim, and J. H. Chen. 2013. A DNS study of ignition characteristics of a lean iso -octane/air mixture under HCCI and SACI conditions. Proc. Combust. Inst. 34 (2):2985–93. doi:https://doi.org/10.1016/j.proci.2012.05.019.
- Yoshizawa, A., and K. Horiuti. 1985. A statistically-derived subgrid-scale kinetic energy model for the large-eddy simulation of turbulent flows.Journal of the Physical Society of Japan. 54:2834–39.
- Yu, H., and Z. Chen. 2015. End-gas autoignition and detonation development in a closed chamber. Combust.Flame 162 (11):4102–11. doi:https://doi.org/10.1016/j.combustflame.2015.08.018.
- Zeldovich, Y. B. 1980. Regime classification of an exothermic reaction with nonuniform initial conditions. Combust.Flame 39 (2):211–14. doi:https://doi.org/10.1016/0010-2180(80)90017-6.
- Zhen, X., Y. Wang, S. Xu, and Y. Zhu. 2013a. Study of knock in a high compression ratio spark-ignition methanol engine by multi-dimensional simulation. Energy 50:150–59. doi:https://doi.org/10.1016/j.energy.2012.09.062.
- Zhen, X., Y. Wang, and Y. Zhu. 2013b. Study of knock in a high compression ratio SI methanol engine using LES with detailed chemical kinetics. Energ. Convers. Manage. 75:523–31. doi:https://doi.org/10.1016/j.enconman.2013.07.001.