References
- Bradley, D., C. Morley, X. Gu, and D. Emerson. 2002. Amplified pressure waves during autoignition: Relevance to CAI engines. SAE Transactions, 2679–90.
- Chen, L., J. Pan, H. Wei, L. Zhou, and J. Hua. 2019. Numerical analysis of knocking characteristics and heat release under different turbulence intensities in a gasoline engine. Appl. Therm. Eng. 159:113879. doi:https://doi.org/10.1016/j.applthermaleng.2019.113879.
- Dahnz, C., and U. Spicher. 2010. Irregular combustion in supercharged spark ignition engines–pre-ignition and other phenomena. Int. J. Eng. Res. 11:485–98. doi:https://doi.org/10.1243/14680874JER609.
- Dec, J. E. 2009. Advanced compression-ignition engines—understanding the in-cylinder processes. Proc. Combust. Inst. 32:2727–42. doi:https://doi.org/10.1016/j.proci.2008.08.008.
- Goldsborough, S. S., S. Hochgreb, G. Vanhove, M. S. Wooldridge, H. J. Curran, and C.-J. Sung. 2017. Advances in rapid compression machine studies of low-and intermediate-temperature autoignition phenomena. Prog. Energy Combus. Sci. 63:1–78. doi:https://doi.org/10.1016/j.pecs.2017.05.002.
- Gu, X., D. Emerson, and D. Bradley. 2003. Modes of reaction front propagation from hot spots. Combust. Flame 133:63–74. doi:https://doi.org/10.1016/S0010-2180(02)00541-2.
- Guibert, P., A. Keromnes, and G. Legros. 2007. Development of a turbulence controlled rapid compression machine for HCCI combustion. SAE Technical Paper.
- Hill, H., C.-P. Ding, E. Baum, B. Böhm, A. Dreizler, and B. Peterson. 2019. An application of tomographic PIV to investigate the spray-induced turbulence in a direct-injection engine. Int. J. Multiph. Flow 121:103116. doi:https://doi.org/10.1016/j.ijmultiphaseflow.2019.103116.
- Hultqvist, A., M. Christensen, B. Johansson, M. Richter, J. Nygren, J. Hult, and M. Aldén. 2002. The HCCI combustion process in a single cycle—high-speed fuel tracer LIF and chemiluminescence imaging. SAE Transactions, 913–27.
- Lavoie, G. A., E. Ortiz-Soto, A. Babajimopoulos, J. B. Martz, and D. N. Assanis. 2013. Thermodynamic sweet spot for high-efficiency, dilute, boosted gasoline engines. Int. J. Eng. Res. 14:260–78. doi:https://doi.org/10.1177/1468087412455372.
- Lodier, G., C. Merlin, P. Domingo, L. Vervisch, and F. Ravet. 2012. Self-ignition scenarios after rapid compression of a turbulent mixture weakly-stratified in temperature. Combust. Flame 159:3358–71. doi:https://doi.org/10.1016/j.combustflame.2012.07.006.
- Ma, X., Z. Wang, C. Jiang, Y. Jiang, H. Xu, and J. Wang. 2014. An optical study of in-cylinder CH2O and OH chemiluminescence in flame-induced reaction front propagation using high speed imaging. Fuel 134:603–10. doi:https://doi.org/10.1016/j.fuel.2014.06.002.
- Martz, J., H. Kwak, H. Im, G. Lavoie, and D. Assanis. 2011. Combustion regime of a reacting front propagating into an auto-igniting mixture. Proc. Combust. Inst. 33:3001–06. doi:https://doi.org/10.1016/j.proci.2010.07.040.
- Martz, J. B., G. A. Lavoie, H. G. Im, R. J. Middleton, A. Babajimopoulos, and D. N. Assanis. 2012. The propagation of a laminar reaction front during end-gas auto-ignition. Combust. Flame 159:2077–86. doi:https://doi.org/10.1016/j.combustflame.2012.01.011.
- Mittal, G., and C.-J. Sung. 2006. Aerodynamics inside a rapid compression machine. Combust. Flame 145:160–80. doi:https://doi.org/10.1016/j.combustflame.2005.10.019.
- Mittal, G., and C.-J. Sung*. 2007. A rapid compression machine for chemical kinetics studies at elevated pressures and temperatures. Combust. Sci. Technol. 179:497–530. doi:https://doi.org/10.1080/00102200600671898.
- Pan, J., Z. Hu, H. Wei, M. Pan, X. Liang, G. Shu, and L. Zhou. 2019. Understanding strong knocking mechanism through high-strength optical rapid compression machines. Combust. Flame 202:1–15. doi:https://doi.org/10.1016/j.combustflame.2019.01.004.
- Pan, J., and C. Sheppard. 1994. A theoretical and experimental study of the modes of end gas autoignition leading to knock in SI engines. SAE Transactions, 1925–47.
- Pan, J., Z. Zheng, H. Wei, M. Pan, G. Shu, and X. Liang. 2020. An experimental investigation on pre-ignition phenomena: Emphasis on the role of turbulence. Proceedings of the Combustion Institute.
- Qi, Y., Z. Wang, J. Wang, and X. He. 2015. Effects of thermodynamic conditions on the end gas combustion mode associated with engine knock. Combust. Flame 162:4119–28. doi:https://doi.org/10.1016/j.combustflame.2015.08.016.
- Renaud, A., C.-P. Ding, S. Jakirlic, A. Dreizler, and B. Bohm. 2018. Experimental characterization of the velocity boundary layer in a motored IC engine. Int. J. Heat Fluid Flow 71:366–77. doi:https://doi.org/10.1016/j.ijheatfluidflow.2018.04.014.
- Rothe, M., T. Heidenreich, U. Spicher, and A. Schubert. 2006. Knock behavior of SI-engines: Thermodynamic analysis of knock onset locations and knock intensities. SAE Technical Paper.
- Sarli, V. D., and A. D. Benedetto. 2013. Effects of non-equidiffusion on unsteady propagation of?hydrogen-enriched methane/air premixed flames. Int. J. Hydrog. Energy 38:7510–7518. 9–551. doi:https://doi.org/10.1016/j.ijhydene.2013.03.126.
- Sarli, V. D., A. D. Benedetto, E. J. Long, and G. K. Hargrave. 2012a. Time-resolved particle image velocimetry of dynamic interactions between hydrogen-enriched methane/air premixed flames and toroidal vortex structures. Int. J. Hydrog. Energy 37:16201–13. doi:https://doi.org/10.1016/j.ijhydene.2012.08.061.
- Sarli, V. D., A. D. Benedetto, and G. Russo. 2010. Sub-grid scale combustion models for large eddy simulation of unsteady premixed flame propagation around obstacles. J. Hazard. Mater. 180:71–78. doi:https://doi.org/10.1016/j.jhazmat.2010.03.006.
- Sarli, V. D., A. D. Benedetto, and G. Russo. 2012b. Large Eddy Simulation of transient premixed flame–vortex interactions in gas explosions. Chem. Eng. Sci. 71:53. doi:https://doi.org/10.1016/j.ces.2011.11.034.
- Tanoue, K., T. Jimoto, T. Kimura, M. Yamamoto, and J. Hashimoto. 2017. Effect of initial temperature and fuel properties on knock characteristics in a rapid compression and expansion machine. Proc. Combust. Inst. 36:3523–31. doi:https://doi.org/10.1016/j.proci.2016.08.036.
- Taylor, A. M. 2008. Science review of internal combustion engines. Energy Policy 36:4657–67. doi:https://doi.org/10.1016/j.enpol.2008.09.001.
- Wang, W., L. Yu, Y. Feng, Y. Qian, D. Ju, and X. Lu. 2020. Autoignition study of methyl decanoate using a rapid compression machine. Fuel 266:117060. doi:https://doi.org/10.1016/j.fuel.2020.117060.
- Wang, Z., Y. Qi, X. He, J. Wang, S. Shuai, and C. K. Law. 2015. Analysis of pre-ignition to super-knock: Hotspot-induced deflagration to detonation. Fuel 144:222–27. doi:https://doi.org/10.1016/j.fuel.2014.12.061.
- Weber, B. W., C.-J. Sung, and M. W. Renfro. 2015. On the uncertainty of temperature estimation in a rapid compression machine. Combust. Flame 162:2518–28. doi:https://doi.org/10.1016/j.combustflame.2015.03.001.
- Wei, H., A. Shao, J. Hua, L. Zhou, and D. Feng. 2018. Effects of applying a Miller cycle with split injection on engine performance and knock resistance in a downsized gasoline engine. Fuel 214:98–107. doi:https://doi.org/10.1016/j.fuel.2017.11.006.
- Wei, H., C. Chen, H. Zhou, W. Zhao, and Z. Ren. 2016. Effect of turbulent mixing on the end gas auto-ignition of n-heptane/air mixtures under IC engine-relevant conditions. Combust. Flame 174:25–36. doi:https://doi.org/10.1016/j.combustflame.2016.09.011.
- Yousefian, S., N. J. Quinlan, and R. F. Monaghan. 2018. Simulation of turbulent flow in a rapid compression machine: Large Eddy Simulation and computationally efficient alternatives for the design of ignition delay time experiments. Fuel 234:30–47. doi:https://doi.org/10.1016/j.fuel.2018.06.117.
- Zel’dovich, Y. B. 1980. Classification of regimes of exothermic reaction in accordance with initial conditions. Combust. Flame 39:211–14. doi:https://doi.org/10.1016/0010-2180(80)90017-6.
- Zhang, T., W. Sun, L. Wang, and Y. Ju. 2019. Effects of low-temperature chemistry and turbulent transport on knocking formation for stratified dimethyl ether/air mixtures. Combust. Flame 200:342–53. doi:https://doi.org/10.1016/j.combustflame.2018.12.001.
- Zhen, X., Y. Wang, S. Xu, Y. Zhu, C. Tao, T. Xu, and M. Song. 2012. The engine knock analysis–An overview. Appl. Energy 92:628–36. doi:https://doi.org/10.1016/j.apenergy.2011.11.079.