Hydrodynamic Aspects of Spouted Beds at Elevated Temperatures

References

• Altwicker , E. R. , Konduri , R. K. N. V., and Milligan , M. S. ( 1989 ). Spouted bed combustor for the study of heterogeneous hazardous waste incineration, AIChE Summer National Meeting , Philadelphia , Paper No. 82c .
   Google Scholar
• Altwicker , E. R. , Schonberg , J. A. , and Konduri , R. K. N. V. ( 1990 ). Formation of polychlorodibenzo‐p‐dioxins and polychlorodibenzofurans during heterogeneous combustion, Emissions From Combustion Processes: Origin, Measurement, Control , Clement , R. and Kagel , R (eds.), Lewis Publishers, Chapter 2.
   Google Scholar
• Arbib , H. A. , Sawyer , R. F. , and Weinberg , F. J. ( 1981 ). The combustion characteristics of spouted beds, 18th Symp. (Int.) on Combustion , The Combustion Institute, pp. 223 .
   Google Scholar
• Arbib , H. A. , and Levy , A. ( 1982 a). Combustion of low heating value fuels and wastes in the spouted bed , Can. J. Chem. Eng. , 60 , ( 8 )
   Google Scholar
• Arbib , H. A. and Levy , A. ( 1928 b). The reverse‐flow spouted bed combustor , Comb. Sci. and Tech . 29 , 83 ‐ 6 .
   Web of Science ®Google Scholar
• Becker , H. A. ( 1961 ). An investigation of laws governing the spouting of coarse particles , Chem. Eng. Sci. , 13 , 245 .
   Web of Science ®Google Scholar
• Botterill , J. S. M. and Teoman , Y. ( 1980 ). Fluidization , Edited by Grace and Matson, Plenum Press, NY , 93 ‐ 00 .
   Google Scholar
• Botterill , J. S. M. ( 1989 ). Fluidized bed behaviour at high temperatures and pressures, Transport Processes in Fluidized Beds , L. K. Doraiswamy , A. S. Majumdar (eds.), Elsevier, NY . Chandnani , P. P. ( 1984 ). Gas spouting of fine particles, M.A.Sc. thesis. University of British Columbia, Vancouver. Canada, Chapter 2 .
   Google Scholar
• Ghosh , B. ( 1965 ). The spouted bed—a theoretical analysis , Indian Chem. Eng. , 7 , 16 ‐ 9 .
   Google Scholar
• Gishler , P. E. ( 1983 ). The spouted bed technique—discovery and early studies at NRC , Can. J. Chem. Eng. , 61 , 267 ‐ 68 .
   Web of Science ®Google Scholar
• Keller , J. O. , Bramletto , T. T. , Dec , J. E. , and Westbrook , C. K. ( 1989 ). Pulse combustion: the importance of characteristic times , Comb, and Flame , 75 , 33 ‐ 4 .
   Web of Science ®Google Scholar
• Khoe , G. K. and Weve , D. ( 1983 ). Visual observations of spouted bed gas combustion modes and their flow regimes , Can. J. Chem. Eng. , 61 , No. 3 , 460 .
   Web of Science ®Google Scholar
• Khoshnoodi , M. and Weinberg , F. J. ( 1978 ). Comb, and Flame , 33 , 11 .
   Web of Science ®Google Scholar
• Konduri , R. K. N. V. ( 1989 ). Hydrodynamic and combustion parameters for the characterization of a spouted bed combustor, M.S. thesis, Rensellaer Polytechnic Institute, Troy , NY .
   Google Scholar
• Konduri , R. K. N. V. and Altwicker , E. R. ( 1992 ). Manuscript in preparation.
   Google Scholar
• Kumpinsky , K. , and Amundson , N. R. ( 1984 ), Reactor assessment for the combustion of char in spouted beds of sand , Ind. Eng. Chem. Process Des. Dev. , 23 , 784 ‐ 94 .
   Web of Science ®Google Scholar
• Lefroy , G. A. and Davidson , J. F. ( 1969 ). The mechanics of spouted beds , Transl Inst. Chem. Engrs. , 47 ,( 5 ) TI20–T128 .
   Google Scholar
• Lipstein , N. J. ( 1962 ). Low velocity sudden expansion pipe flow , ASHRAE J. , July , 43 ‐ 7 .
   Google Scholar
• Littman , H. e , [a-z] al. ( 1977 ). A theory for predicting the maximum spoutable height in a spouted bed , Can.J. Chem. Eng. , 55 , ( 5 ) 497 ‐ 01 .
   Web of Science ®Google Scholar
• Littman , H. and Morgan , M. H. , III ( 1979 ). Prediction of Hm and the average spout to inlet diameter tube diameter ratio in spouted beds of spherical particles , Can. J. Chem. Eng. , 57 , 684 ‐ 94 .
   Web of Science ®Google Scholar
• Littman , H. , and Morgan , M. H., III ( 1983 ). A general correlation for the minimum spouting velocity. Can. J. Chem. Eng. , 61 , ( 3 ) 269 ‐ 73 .
   Web of Science ®Google Scholar
• Littman , H. , and Morgan , M. H. , III ( 1989 ). The measurements, prediction and correlation of the Ums,δPm, Hm, and dx, in spouted beds of coarse particles. Transport Processes in Fluidized Beds , L. K. Doraiswamy , A. S. Majumdar (eds.) Chapter 7 , Elsevier, NY .
   Google Scholar
• Mamuro , T. and Hattori , H. ( 1968 ). Flow pattern of fluid in spouted beds , J. Chem. Eng., Japan , 1 ,( 1 ) 1 ‐ 02 .
   Google Scholar
• Mathur , K. B. and Gishler , P. E. ( 1955 ). A technique for contracting gases with coarse solid particles , AIChEJ. , 1 , 157 ‐ 64 .
   Web of Science ®Google Scholar
• Mathur , K. B. and Epstein , N. ( 1974 ). Spouted beds. , Academic Press. NY .
   Google Scholar
• McNab , G. S. ( 1972 ). Prediction of spout diameter , Brit. Chem. Eng. and Proc. Tech. , 17 , 532 .
   Web of Science ®Google Scholar
• Morgan , M. H. , III and Littman, H. ( 1980 ). General relationships for the minimum spouting pressure drop ratio (δpms/δpmf spout voidage distribution, stability and particlecirculation rates in spouted beds of coarse particles I. Theory, Chem. Eng. Sci. , 40 , ( 8 ) 1367 ‐ 377 .
   Web of Science ®Google Scholar
• Morgan , M. H., III ( 1986 ). Analytic expressions for the spout/annulus pressure drop and pressure gradient in spouted beds of coarse particles, Proc. of 5th Eng. Foundation Conference on Fluidization Elsinore , Denmark , pp. 249 ‐ 56 .
   Google Scholar
• Ohtake , K. , Hart , J. R. , and Sawyer , R. F. ( 1984 ). Combustion and flow in a two‐dimensional spouted bed , 20th Symp. (Int.) on Cumbustion , The Combustion Institute.
   Google Scholar
• Poinzy , B. and Wojcicki , S. ( 1984 ). On modelling of pulse combustors, 20th Symp. (Int.) on Combustion , The Combustion Institute, 2019 ‐ 024 .
   Google Scholar
• Raleigh , Lor , [a-z] ( 1878 ). Nature , 18 , 319 .
   Google Scholar
• Richardson , J. F. and Zaki , W. N. ( 1954 ). Sedimentation and fluidization: Part 1 , Trans. Inst. Chem. Engrs. , 32 , 35 .
   Google Scholar
• Rovero , G. , et al. ( 1983 ). Gas flow distribution in conical base spouted beds , Can. J. Chem. Eng. , 61 , ( 3 ) 289 ‐ 96 .
   Web of Science ®Google Scholar
• Tessandier , R. G. and Wilson , M. P. ( 1974 ). An analysis of flow through sudden enlargement in pipes , J.Fluid Mech. , 64 , Part 1 , 85 ‐ 5 .
   Web of Science ®Google Scholar
• Thorley , B. , Sanby , J. B. , Mathur , K. B. , and Osberg , G. L. ( 1959 ). An analysis of air and solid flow in a spouted wheat bed , Can. J. Chem. Eng. , 37 , 184 ‐ 92 .
   Google Scholar
• Wen , C. Y. and Yu , Y. H. ( 1966 ). A generalized method for predicting the minimum f liuidizing velocity. AIChEJ. , 12 , 610 ‐ 12 .
   Web of Science ®Google Scholar
• Weinberg , F. et at. ( 1988 ). Partial oxidation of fuel rich mixture in a spouled bed combustor , Comb. and Flame , 72 , 235 ‐ 39 .
   Web of Science ®Google Scholar
• Wu , W. M. S. , Lim , C. J. , and Epstein , N. ( 1987 ). Hydrodynamics of spouted beds at elevated temperatures , Chem. Eng. Commun. , 62 , 251 ‐ 68 .
   Web of Science ®Google Scholar