50
Views
22
CrossRef citations to date
0
Altmetric
Original Articles

Oxidation of the Piston Crevice Hydrocarbon During the Expansion Process in a Spark Ignition Engine

&
Pages 307-326 | Received 13 Jun 1994, Accepted 20 Mar 1995, Published online: 17 Apr 2007

References

  • Adamczyk , A. A. , Kaiser , E. W. and Lavoie , G. A. ( 1983 ). A Combustion Bomb Study of the Hydrocarbon Emissions from Engine Crevices. Combust. Sci. Tech. , 33 , 261 .
  • Boam , D. J. , Finlay , I. C. , Biddulph , T. W. , Ma , T. , Lee , R. , Richardson , S. H. , Bloomfield , J. , Green , J. A. , Wallace , S. , Woods , W. A. and Brown , P. ( 1992 ). The Sources of Unburnt Hydrocarbon Emissions from Spark Ignition Engines During Cold Starts and Warm-up . I. Mech. E. , C448/664.
  • Cheng , W. K. , Galliot , F. and Collings , N. ( 1989 ). On the Time Delay in Continuous in-Cylinder Sampling from IC Engines , SAE paper no. 890579, The Society of Automotive Engineers .
  • Cheng , W. K. , Hamrin , D. , Heywood , J. B. , Hochgreb , S. , Min , K. and Norris , M. ( 1993 ) An Overview of Hydrocarbon Emissions Mechanisms in Spark-Ignition Engines . SAE paper no. 932708, The Society of Automotive Engineers.
  • Dagaul , P. , Cathonnet , M. and Boettner , J. C. ( 1987 ). Kinetics Modeling of Propane Oxidation . Combust. Sci. Tech. , 56 , 23 .
  • Drobot , K. , Cheng , W. K. , Trinker , F. H. , Kaiser Siegl , W. O. , Cotton D. F. and Underwood , J. ( 1994 ). Hydrocarbon Oxidation in the Exhaust Port and Runner of a Spark Ignition Engine. Combust, and Flame , 99 , 422 .
  • Fox , J. W. , Cheng , W. K. and Heywood , J. B. ( 1993 ). A Model for Predicting Residual Gas Fraction in Spark-Ignition Engines. SAE paper no. 931025, The Society of Automotive Engineers .
  • Kaplan , J. A. ( 1992 ). Modeling the Spark Ignition Engine Warm-up Process to Predict Component Temperatures. M.Sc. Thesis , Department of Mechanical Engineering , MIT .
  • Lucht , R. P. , Dunn-Rankin , D. , Walter , T. , Dreier , T. and Bopp , S. C. ( 1991 ). Heat Transfer in Engines Comparison of CARS Thermal Boundary Layer Measurements and Heat Flux Measurements . SAE paper no. 910722, The Society of Automotive Engineers .
  • Lyford-Pike , E. J. and Heywood , J. B. ( 1984 ). Thermal Boundary Layer Thickness in the Cylinder of a Spark-Ignition Engine. Int. J. Heat Transfer , 27 ( 10 ), 1873 – 1878 .
  • Min , K. ( 1994 ), The Effects of Crevices on the Engine-Out Hydrocarbon Emissions in Spark Ignition Engines . Ph.D. Thesis , Department of Mechanical Engineering , MIT .
  • Min , K. , Cheng , W. K. and Heywood , J. B. ( 1994 ). The Effects of Crevices on the Engine-Out Hydrocarbon Emissions in SI Engines. SAE paper no. 940306, The Society of Automotive Engineers .
  • Namazian , M. , Hansen , S. , Lyford-Pike , E. , Sanchez-Barsse , J. , Heywood , J. B. and Rife , J. ( 1980 ). Schlieren Visualization of the Flow and Density Fields in the Cylinder of a Spark-Ignition Engine . SAE paper no. 800044, The Society of Automotive Engineers .
  • Namazian , M. and Heywood , J. B. ( 1982 ). Flow in the Piston-Cylinder-Ring Crevices of a Spark-Ignition Engine Effect on Hydrocarbon Emissions , Efficiency and Power. SAE paper no. 820088, The Society of Automotive Engineers .
  • Reitz , R. D. and Kuo , T. W. ( 1989 ) Modeling of HC Emissions Due to Crevice Flows in Premixed-Charge Engines . SAE paper no. 892085, The Society of Automotive Engineers .
  • Wentworth , T. J. ( 1968 ). The Piston Crevice Volume Effect on Exhaust Hydrocarbon Emissions. Combust. Sci. Tech. , 4 , 97 .
  • Corresponding author. 31-165 MIT, Cambridge, MA 02139-7430; Tel: (617)253-4531; Fax: (617)-253-9453.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.