References
- Andrews , J. G. and Atthey , D. R. ( 1975 ) Analytical and numerical techniques for ablation problems . Moving Boudary Problems in Heat Flow and Diffusion , Clarendon Press , Oxford , p. 38 .
- Asaithambi , N. S. ( 1988 ) On a variable time-step method for the one-dimensional Stefan problem . Compo Meth. in App. Mech. Eng. , 71 , p. 1 .
- Atreya , A. and Wichman , I. S. ( 1989 ) Heat and mass transfer during piloted ignition of cellulosic solids . Trans ASME J. Heat Transfer , 111 , p. 719 .
- Bamford , C. H. , Crank , J. and Malan , D. H. ( 1946 ) The burning of wood . Proc. Cambridge Phil Soc. , 42 , p. 166 .
- Batchelor , G. K. ( 1987 ) An introduction to fluid dynamics . Cambridge University Press .
- Billings , M. J. , Warren , L. and Wilkins , R. ( 1971 ) Thermal erosion of electrical insulating materials . IEEE Trans.on Elect.Ins. , 6 ( 2 ), p. 82 .
- Deepak , D. and Drysdale , D. D. ( 1983 ) Flammability of solids: an apparatus to measure the critical mass flux at firepoint . Fire Safety Journal , 5 , p. 167 .
- Delichatsios , M. A. and Chen , Y. ( 1993 ) Asymptotic, approximate and numerical solutions for the heatup and pyrolisis of materials including reradiation losses . Comb. and Flame , 92 , p. 292 .
- Di Hlasi , C. and Wichman , I. S. ( 1995 ) Effects of solid-phase properties on flames spreading over composite materials . Comb. lind Flame , 102 , p. 229 .
- Elliot , P. J. , Whiteley , R. H. and Staggs , J. E. J. ( 1995 ) Steady state analysis of cone calorimeter data . Proc. Fire & Materials 4th. Int. Conf., November 1995, Crystal City VA , p. 35 .
- Houser , T. J. ( 1966 ) Kinetics of polymer pyrolysis from surface regression rates . J. Chern. Phys. , 45 ( 3 ), p. 1031 .
- Janssens , M. ( 1991 ) Piloted ignition of wood: a review . Fire and Materials , 15 , p. 151 .
- Kashiwagi , T. ( 1994 ) Polymer combustion and flammability- role of the condensed phase . 25th, Symp. (Int.) on Combustion , The Combustion Institute , p. 1423 .
- Landau , H. G. ( 1950 ) Heat conduction in a melting solid . Quart. J. Appl. Math. , 8 , p. 81 .
- Martin , S. Il. ( 1965 ) Diflusion-controlled ignition of cellulosic materials by intense radiant energy . 10th Symp. (Int.) on Combustion , The Combustion Institute , Pittsburgh , p. 887 .
- Melnick , A. M. and Nolan , E. J. ( 1971 ) The design and development of a high-heating-rate thermogravimetric analyzer suitable for use with ablative plastics. In “Ablative Plastics” , Marcel Dekker Inc. , p. 315 .
- Mikkola , E. and Wichman , I. S. ( 1989 ) On the thermal ignition of combustible materials . Fire and Materials , 14 , p. 87 .
- Nelson , M. I. , Brindley , J. and Mcintosh , A. ( 1995 ) The dependence of critical heat flux on fuel and additive properties: a critical mass flux model . Fire Safety Journal , 24 , p. 107 .
- Ohlerniller , T. and Shields , J. ( 1993 ) One- and two-sided burning of thermally thin materials . Fire and Materials , 17 , p. 103 .
- Parker , W. J. ( 1985 ) Ph.D. Thesis . NBSIR 85-3163 .
- Parker , W. J. and Filipczak , R. ( 1993 ) Modelling the heat release rate of aircraft cabin panels . NIST report DOT/FAA/CT-92/3 .
- Rasbash , D. J. , Drysdale , D. D. and Deepak , D. ( 1986 ). Critical heat and mass transfer at pilot ignition and extinction of a material . Fire Sofety Journal , 10 , p. 1 .
- Rastegar , S. , Motamedi , M. , Welch , A. J. and Hayes , L. J. ( 1989 ) A theoretical study of the effect of optical properties in laser ablation of tissue . IEEE Trans. all Biomed. Eng. , 36 ( 12 ), p. 1180 .
- Ricci , R. ( 1990 ) Travelling wave solutions of the Stefan and the ablation problems . SIAM J. Math. Anal. , 21 ( 6 ), p. 1386 .
- Rychly , J. and Costa , L. ( 1995 ) Modelling of polymer ignition and burning adopted for cone calorimeter measurements: the correlation between rate of heat release and oxygen index . Fire & Minerials , 19 , p. 215 .
- Simms , D. L. ( 1963 ) On the pilot ignition of wood by radiation . Comb. and Flame , 7 p. 253 .
- Smith , G. D. ( 1985 ) Numerical Solution of Partial Differential Equations . Oxford .
- Staggs , J. E. J. ( 1996 ) A discussion of modelling idealised ablative materials with particular reference to fire testing . To appear in the Fire Safety Journal .
- Staggs , J. E. J. and Whiteley , R. H. ( 1996 ) Modelling the combustion of solid-phase fuels in Cone calorimeter experiments . Interfiam '96. 7th. Int. Fire Science & Eng. Conf. Interscience Communication . p. 103 .
- Tcwarson , A. ( 1982 ) Experimental evaluation of flammability parameters of polymeric materials . In Flame Retardent Polymeric Materials , 3 , ed. Sm M. Atlas & E. M. Pearce , Plenum Press , New York and London p. 97 .
- Thomson , H. E. and Drysdale , D. D. ( 1989 ) Flammability of plastics II. Critical mass flux at the firepoint . Fire Safety Journal . 14 , p. 179 .
- Vovelle , C. , Delfau , J. and Reuillon , M. ( 1987 ) Experimental and numerical study of thermal degradation of PMMA . Comb. Sci & Tech. , 53 , p. 187 .
- Whiteley , R. H. ( 1993 ) Some comments on the measurement of ignitability and on the calculation of ‘Critical Heat Flex’ . Fire Safety Journal , 21 , p. 177 .
- Whiting , P. , Dowden , J. M. , Kapadia , P. D. and Davis , M. P. ( 1992 ) A one-dimensional mathematical model of laser induced thermal ablation of biological tissue . Lasers in Med. Sci. , 7 , p. 357 .
- Wichman , I. S. and Atreya , A. ( 1987 ) A simplified model for the pyrolysis of charring materials . Comb. & Flame , 68 , p. 231 .