OPTIMAL ECONOMIC TOOL REGRINDING WITH TAGUCHI'S QUALITY LOSS FUNCTION

REFERENCES

• Abdel-Malek , L. L. , “ The effect of metaj cutting economics on the throughput of flexible manufacturing systems ” Production Planning and Control , Vol. 2 , No. 3 , 1991 . 265 – 272 .
   Google Scholar
• Albert , M. , “ Tool management for a ten-year old FMS ” Modern Machine Shop , March , 1987 , 54 – 62 .
   Google Scholar
• Boolhroyd , G. and Rusek , P. , “ Maximum rate of profit criteria in machining ” Journal of Engineering for Industry , February , 1976 .
   Google Scholar
• Boucher Thomas O. , “ The choice of cost parameters in machining cost models ” The Engineering Economist , Vol. 32 , No. 3 , 1987 , 217 – 229
   Google Scholar
• Cherpakov , B.I. , “ Group replacement of tools in automatic lines ” Soviet Engineering Research , Vol. 54 , Issue 10 , 1983 , 6 – 7 ,
   Google Scholar
• Hitomi , K. , Manufacturing Systems Engineering , London Taylor & Francis Ltd. , 1979 , 165 .
   Google Scholar
• ISO 1980 , Technical drawings geometrical tolerancing ; tolerances of form, orientation, location and run-outs, generalities, definitions, symbols, indications of drawings, ISO-DIS 1101 .
   Google Scholar
• Jacobs , H.-J. , Hentschel B. and Stange B. , “ Intelligent tool monitoring for machining ” International Journal of Production Research , Vol. 26 , No. 10 , 1988 , 1579 – 1592 .
   Web of Science ®Google Scholar
• Kendall L.A. , and Bayoumi , A. , “ Automatic tool-wear monitoring and tool changing using intelligent supervisory control ” International Journal of Production Research , Vol. 26 . No. 10 , 1988 , 1619 - 1928 .
   Web of Science ®Google Scholar
• Kordysh L.M. , “A method for detennining the time of automatic change of tools and workpieces” Soviet Engineering Research , Vol. 58 . Issue 4 , 1987 , 9 – 11 .
   Google Scholar
• LaCommare , U. , LaDiega , S.N. and Passannati , A. , “ Optimal tool replacement policies with penality cost for unforseen tool failure ” International Journal of Machine Tool Design Research , 23 , 1983 , 237 – 243 .
   Web of Science ®Google Scholar
• Leung , L.C. and Khator , S.K. , “ Tool handling in automated manufacturing ” in Book in Transportation and Storage in Manufacturing , ed. by J.M.A. Tanchoco , Chapman & Hill ( Forthcoming ).
   Google Scholar
• Loktev , A.D. , “ More efficient use of cutting tools an integrated approach ” Soviet Engineering Research , Vol. 54 , Issue 7 , 1983 , 14 – 16 .
   Google Scholar
• McCartney J. and Hinds B.K. , “ Tooling economics in integrated manufacturing systems ” International Journal of Production Research , Vol. 20 , No. 20 , 1982 , 493 – 505 .
   Google Scholar
• Ramalingam , S. , and Watson , J. D. , “ Tool life distributions, Part 4 minor phases in work material and multiple-injury tool failure ” Journal of Engi~ neeringfor Industry, Transaction of the ASME , 100 , 1978 , 519 – 522 .
   Google Scholar
• Ramalingam , S. , Peng , Y.I. , and Watson , J.D. , “ Tool life distributions, Part 3 Mechanism of single injury tool failure and tool life distribution in interrupted cut ” ASME Paper No. 77-WA/PRod 39 , 1977 .
   Google Scholar
• Ramalingam , S. , Ramalingam , S. , and Watson , J.D. , “ Tool life distributions. Part 1 single injury tool-life model ” Journal of Engineering for Industry, Transaction of the ASME 99 . 1977 , p519 -522 p.
   Google Scholar
• Ramalingam , S. , “ Tool life distributions, Part 2 Multiple-injury tool-life model ” Journal of Engineering for Industry, Transaction of the ASME , 99 , 1977 . 523 – 531 .
   Web of Science ®Google Scholar
• Rosetto , S. , and Levi , R. ,“ Fracture and wear as factors affecting stochastic tool-life models and machining economics ” Journal of Engineering for Industry, Transaction of the ASME , 73 , 1977 , 281 – 285 .
   Google Scholar
• SchaLl S.O. , and Cbandra , J. , “ Optimal tool inspection intervals using a process control approach ” International Journal of Production Research , Vol. 25 , No. 5 , 1990 , 841 – 851 .
   Google Scholar
• Shiekh , A. K. , Kendall , L.A. , and Pandit , S. M. , “ Probabilistic optimization of multitool machining operations ” Journal of Engineering for Industry, Transaction of the ASME , 102 , 1980 , 239 – 246 .
   Google Scholar
• Taguchi , G. , Quality Evaluation for Quality Assurance , American Supplier Institute , 1984 .
   Google Scholar
• Tagucbi , G. , Elsayed , E. , Hsiang , T. , Quality Engineering in Production Systems , McGraw-Hill , 1989 .
   Google Scholar
• Taha , H. , “ A policy for determining the oplitnal cycle length for a cutting tool. ” Journal of Industrial Engineering , 17 , 1966 , 157 – 162 .
   Web of Science ®Google Scholar
• Wagner , J.G. and Barash , M. M. , “ Study of the distribution of the life of HSS tools ” Journal of Engineering for Industry, Transaction of the ASME , 73 , 1977 . 1044 – 1049 .
   Google Scholar