References
- Amari, M., and P. Donati. 2012. “Occupational LBP of Seated Drivers: Field Measurements of Combined Exposure to WBV and Body Postures.” Proceedings of the 47th United Kingdom Conference on Human Responses to Vibration, University of Southampton, Southampton, England.
- Bongers, P. M., and H. C. Boshuizen. 1990. Back Disorders and Whole-Body Vibration at Work. Netherlands: Proefschrift Universiteit van Amsterdam.
- Bovenzi, M., I. Pinto, and N. Stacchini. 2002. “Low Back Pain in Port Machinery Operators.” Journal of Sound and Vibration 253 (1): 3–20.
- Bovenzi, M., F. Rui, C. Negro, F. D'Agostin, G. Angotzi, S. Bianchi, L. Bramantib, G. Festab, S. Gattib, I. Pintob, L. Rondinab, and N. Stacchini. 2006. “An Epidemiological Study of Low Back Pain in Professional Drivers.” Journal of Sound and Vibration 298 (3): 514–539.
- Chaffin, D. B., G. Andersson, and B. J. Martin. 1984. Occupational Biomechanics (pp. 14–52). New York: Wiley.
- Donati, P., M. Schust, J. Szopa, J. Starck, L. G. Iglesias, L. P. Senovilla, S. Fischer, E. Flaspöler, D. Reinert, and R. O. de Beeck. 2008. “Workplace Exposure to Vibration in Europe: An Expert Review.” In European Agency for Safety and Health at Work, European Risk Observatory Report EN7: 1–100. Bilbao, Spain: European Agency for Safety and Health at Work.
- Eger, T., J. Stevenson, J. P. Callaghan, and S. Grenier. 2008. “Predictions of Health Risks Associated with the Operation of Load-Haul-Dump Mining Vehicles: Part 2 – Evaluation of Operator Driving Postures and Associated Postural Loading.” International Journal of Industrial Ergonomics 38 (9): 801–815.
- Ellegast, R., I. Hermanns, and C. Schiefer. 2009. “Workload Assessment in Field Using the Ambulatory CUELA System.” In Digital Human Modelling, HCII 2009, edited by V. G. Duffy. LNCS 5620, 221–226. Berlin: Springer.
- European Normalisation. 2005. “Safety of Machinery. Human Physical Performance. Part 4: Evaluation of Working Postures and Movements in Relation to Machinery.”
- Fairley, T. E., and M. J. Griffin. 1989. “The Apparent Mass of the Seated Human Body: Vertical Vibration.” Journal of Biomechanics 22 (2): 81–94.
- Griffin, M. J. 2012. Handbook of Human Vibration. London: Academic press.
- Hermanns, I., N. Raffler, R. P. Ellegast, S. Fischer, and B. Göres. 2008. “Simultaneous Field Measuring Method of Vibration and Body Posture for Assessment of Seated Occupational Driving Tasks.” International Journal of Industrial Ergonomics 38 (3): 255–263.
- Hignett, S., and L. McAtamney. 2000. “Rapid Entire Body Assessment (REBA).” Applied Ergonomics 31 (2): 201–205.
- International Organization for Standardization. 1992. “Mechanical Vibration. Laboratory Method for Evaluating Vehicle Seat Vibration. Basic Requirements.” International Standard, ISO 10326-1.
- International Organization for Standardization. 1997. “Mechanical Vibration and Shock – Evaluation of Human Exposure to Whole-Body Vibration – Part 1: General Requirements.” International Standard, ISO 2631-1.
- International Organization for Standardization. 2008. “Earth-Moving Machinery – Laboratory Evaluation of Operator Seat Vibration.” International Standard, ISO 7096.
- International Organization for Standardization. 2000. “Ergonomics – Evaluation of Working Postures.” International Standard, ISO 11226.
- International Organization for Standardization. 2005. “Human Response to Vibration – Measuring Instrumentation.” International Standard, ISO 8041.
- International Organization for Standardization. 2012. “Mechanical Vibration – Description and Determination of Seated Postures with Reference to Whole-Body Vibration.” International Standard, ISO∖TR 10687.
- Karhu, O., P. Kansi, and I. Kuorinka. 1977. “Correcting Working Postures in Industry: A Practical Method for Analysis.” Applied Ergonomics 8 (4): 199–201.
- Keyserling, W. M., L. Punnett, and L. J. Fine. 1988. “Trunk Posture and Back Pain: Identification and Control of Occupational Risk Factors.” Applied Industrial Hygiene 3 (3): 87–92.
- Kitazaki, S., and M. J. Griffin. 1997a. “A Modal Analysis of Whole-Body Vertical Vibration, Using a Finite Element Model of the Human Body.” Journal of Sound and Vibration 200 (1): 83–103.
- Kitazaki, S., and M. J. Griffin. 1997b. “Resonance Behaviour of the Seated Human Body and Effects of Posture.” Journal of Biomechanics 31 (2): 143–149.
- Kittusamy, N. K., and B. Buchholz. 2004. “Whole-Body Vibration and Postural Stress Among Operators of Construction Equipment: A Literature Review.” Journal of Safety Research 35 (3): 255–261.
- Magnusson, M. L., and M. H. Pope. 1998. “A Review of the Biomechanics and Epidemiology of Working Postures (It Isn't Always Vibration Which Is to Blame!).” Journal of Sound and Vibration 215 (4): 965–976.
- Mansfield, N. J. 2005. “Impedance Methods (Apparent Mass, Driving Point Mechanical Impedance and Absorbed Power) for Assessment of the Biomechanical Response of the Seated Person to Whole-Body Vibration.” Industrial Health 43 (3): 378–389.
- Mansfield, N. J., and M. J. Griffin. 2000. “Non-Linearities in Apparent Mass and Transmissibility During Exposure to Whole-Body Vertical Vibration.” Journal of Biomechanics 33 (8): 933–941.
- Mansfield, N. J., and M. J. Griffin. 2002. “Effects of Posture and Vibration Magnitude on Apparent Mass and Pelvis Rotation During Exposure to Whole-Body Vertical Vibration.” Journal of Sound and Vibration 253 (1): 93–107.
- McAtamney, L., and E. Nigel Corlett. 1993. “RULA: A Survey Method for the Investigation of Work-Related Upper Limb Disorders.” Applied Ergonomics 24 (2): 91–99.
- Morgan, L. J., and N. J. Mansfield. 2014. “A Survey of Expert Opinion on the Effects of Occupational Exposures to Trunk Rotation and Whole-body Vibration.” Ergonomics 57 (4): 563–574.
- Raffler, N., B. Göres, D. Sayn, and J. Rissler. 2013. “Occupational Posture Analysis Among Whole-Body Vibration Exposed Crane Operators.” Proceedings of the 5th International Conference on Whole Body Vibration Injuries, Academic Medical Center, Amsterdam, Netherlands.
- Raffler, N., I. Hermanns, D. Sayn, B. Goeres, R. Ellegast, and J. Rissler. 2010. “Assessing Combined Exposures of Whole-body Vibration and Awkward Posture – Further Results from Application of a Simultaneous Field Measurement Methodology.” Industrial Health 48 (5): 638–644.
- Rehn, B., I. A. Bergdahl, C. Ahlgren, C. From, B. Järvholm, R. Lundström, T. Nilsson, and G. Sundelin. 2002. “Musculoskeletal Symptoms Among Drivers of All-Terrain Vehicles.” Journal of Sound and Vibration 253 (1): 21–29.
- Rimell, A. N., and N. J. Mansfield. 2007. “Design of Digital Filters for Frequency Weightings Required for Risk Assessments of Workers Exposed to Vibration.” Industrial Health 45 (4): 512–519.
- Tiemessen, I. J., C. T. Hulshof, and M. H. Frings-Dresen. 2008. “Two Way Assessment of Other Physical Work Demands While Measuring the Whole Body Vibration Magnitude.” Journal of Sound and Vibration 310 (4): 1080–1092.
- Wilder, D. G., and M. H. Pope. 1996. “Epidemiological and Aetiological Aspects of Low Back Pain in Vibration Environments – An Update.” Clinical Biomechanics 11 (2): 61–73.