References
- Alexander, M., L. J. Connell, and A. B. Presley. 2005. “Clothing Fit Preferences of Young Female Adult Consumers.” International Journal of Clothing Science and Technology 17 (1): 52–64. doi:https://doi.org/10.1108/09556220510577961.
- Castellucci, Héctor, Carlos Viviani, Pedro Arezes, Johan F.M. Molenbroek, Marta Martínez, Verónica Aparici, and I. Dianat. 2020. “Applied Anthropometry for Common Industrial Settings Design: Working and Ideal Manual Handling Heights.” International Journal of Industrial Ergonomics 78: 102963. doi:https://doi.org/10.1016/j.ergon.2020.102963.
- Chiu, C. Y., D. L. Pease, and R. H. Sanders. 2016. “Effect of Different Standing Poses on Whole Body Volume Acquisition by Three-Dimensional Photonic Scanning.” IET Science, Measurement & Technology 10 (6): 553–556. doi:https://doi.org/10.1049/iet-smt.2015.0252.
- Chowdhary, U. 1991. “Clothing and Self-Esteem of the Institutionalized Elderly Female: Two Experiments.” Educational Gerontology 17 (6): 527–541. doi:https://doi.org/10.1080/0360127910170601.
- Connell, Lenda Jo., Pamela V. Ulrich, Evelyn L. Brannon, Marina Alexander, and Ann Beth Presley. 2006. “Body Shape Assessment Scale: instrument Development for Analyzing Female Figures.” Clothing and Textiles Research Journal 24 (2): 80–95. doi:https://doi.org/10.1177/0887302X0602400203.
- Dianat, I., J. Molenbroek, and H. I. Castellucci. 2018. “A Review of the Methodology and Applications of Anthropometry in Ergonomics and Product Design.” Ergonomics 61 (12): 1696–1720. doi:https://doi.org/10.1080/00140139.2018.1502817.
- Dziuban, C D., and E. C. Shirkey. 1974. “When is a Correlation Matrix Appropriate for Factor Analysis? Some Decision Rules.” Psychological Bulletin 81 (6): 358–361. doi:https://doi.org/10.1037/h0036316.
- Fan, Hao, Suihuai Yu, Jianjie Chu, Mengcheng Wang, Dengkai Chen, Shuai Zhang, Wenzhong Wang, Tong Wu, and Ning Wang. 2019. “Anthropometric Characteristics and Product Categorization of Chinese Auricles for Ergonomic Design.” International Journal of Industrial Ergonomics 69: 118–141. doi:https://doi.org/10.1016/j.ergon.2018.11.002.
- Garneau, C. J., and M. B. Parkinson. 2016. “A Survey of Anthropometry and Physical Accommodation in Ergonomics Curricula.” Ergonomics 59 (1): 143–154. doi:https://doi.org/10.1080/00140139.2015.1052853.
- Gu, B., G. Liu, and B. Xu. 2017. “Individualizing Women’s Suit Patterns Using Body Measurements from Two-Dimensional Images.” Textile Research Journal 87 (6): 669–681. doi:https://doi.org/10.1177/0040517516636001.
- Hamad, Balkiss, Moez Hamad, Sebastien Thomassey, and Pascal Bruniaux. 2018. “3D Adaptive Morphotype Mannequin for Target Population.” Journal of Ergonomics 08 (02): 9. doi:https://doi.org/10.4172/2165-7556.1000229.
- Hammond, Peter, Tim J. Hutton, Judith E. Allanson, Linda E. Campbell, Raoul C M. Hennekam, Sean Holden, Michael A. Patton, Adam Shaw, I Karen Temple, Matthew Trotter, Kieran C. Murphy, and Robin M. Winter. 2004. “3D Analysis of Facial Morphology.” American Journal of Medical Genetics. Part A 126A (4): 339–348. doi:https://doi.org/10.1002/ajmg.a.20665.
- Han, H., and Y. Nam. 2011. “Automatic Body Landmark Identification for Various Body Figures.” International Journal of Industrial Ergonomics 41 (6): 592–606. doi:https://doi.org/10.1016/j.ergon.2011.07.002.
- Hsiao, Hongwei, Jennifer Whitestone, Michael Wilbur, J. Roger Lackore, and J. Gordon Routley. 2015. “Seat and Seatbelt Accommodation in Fire Apparatus: Anthropometric Aspects.” Applied Ergonomics 51: 137–151. doi:https://doi.org/10.1016/j.apergo.2015.04.004.
- Huang, C. Y. 2014. “Study on Classification of Body Shape and Size Grading on Young Women of Quanzhou District.” Advanced Materials Research 989–994: 5319–5322. doi:https://doi.org/10.4028/www.scientific.net/AMR.989-994.5319.
- ISO/TR 10652. 1991. Standard Sizing Systems for Clothes. Geneva: ISO.
- Japanese Industrial Standards Committee. 2001. Sizing Systems for Men’s Garments JIS L 4004 2001 JATRA/JSA.
- Juanfeng, Jin, Pang Chengfang, Chen Weijie, Ye Xiaolu, and Zou Fengyuan. 2016. “Study on Subdivision of Young Male’s Shoulder Shapes and Cross-Section Curve.” Journal of Textile Research 37 (08): 100–106.
- Khadem, M. M., and M. A. Islam. 2014. “Development of Anthropometric Data for Bangladeshi Male Population.” International Journal of Industrial Ergonomics 44 (3): 407–412. doi:https://doi.org/10.1016/j.ergon.2014.01.007.
- Kim, M., M. O. Kim, and S. Park. 2014. “Comparison and Analysis of Men’s Classic-Fit and Slim-Fit Shirt Patterns-Utilizing the 3D Virtual Try-on System.” The Research Journal of the Costume Culture 22 (2): 209–224. doi:https://doi.org/10.7741/rjcc.2014.22.2.209.
- Lee, H. Y., K. Hong, and E. A. Kim. 2004. “Measurement Protocol of Women’s Nude Breasts Using a 3D Scanning Technique.” Applied Ergonomics 35 (4): 353–359. doi:https://doi.org/10.1016/j.apergo.2004.03.004.
- Lee, Y. C., and M. J. Wang. 2015. “Taiwanese Adult Foot Shape Classification Using 3D Scanning Data.” Ergonomics 58 (3): 513–523. doi:https://doi.org/10.1080/00140139.2014.974683.
- Lei, J., X. You, and M. Abdel-Mottaleb. 2016. “Automatic Ear Landmark Localization, Segmentation, and Pose Classification in Range Images.” IEEE Transactions on Systems, Man, and Cybernetics: Systems 46 (2): 165–176. doi:https://doi.org/10.1109/TSMC.2015.2452892.
- Li, Z., Y. Zhan, and W. Zhang. 2011. “Analysis of Related Factors of Armhole Curve Based on Donghua Basic Block.” Journal of Tianjin Polytechnic Univerfsity 30 (5): 30–34.
- Liu, Kaixuan, Jianping Wang, Chun Zhu, and Yan Hong. 2016. “Development of Upper Cycling Clothes Using 3D-to-2D Flattening Technology and Evaluation of Dynamic Wear Comfort from the Aspect of Clothing Pressure.” International Journal of Clothing Science and Technology 28 (6): 736–749. doi:https://doi.org/10.1108/IJCST-02-2016-0016.
- Liu, Kaixuan, Jianping Wang, Xuyuan Tao, Xianyi Zeng, Pascal Bruniaux, and Edwin Kamalha. 2016. “Fuzzy Classification of Young Women’s Lower Body Based on Anthropometric Measurement.” International Journal of Industrial Ergonomics 55: 60–68. doi:https://doi.org/10.1016/j.ergon.2016.07.008.
- Liu, Kaixuan, Xianyi Zeng, Jianping Wang, Xuyuan Tao, Jun Xu, Xiaowen Jiang, Jun Ren, Edwin Kamalha, Tarun-Kumar Agrawal, and Pascal Bruniaux. 2018. “Parametric Design of Garment Flat Based on Body Dimension.” International Journal of Industrial Ergonomics 65: 46–59. doi:https://doi.org/10.1016/j.ergon.2018.01.013.
- Lu, J. M., and M. J. J. Wang. 2008. “Automated Anthropometric Data Collection Using 3D Whole Body Scanners.” Expert Systems with Applications 35 (1–2): 407–414. doi:https://doi.org/10.1016/j.eswa.2007.07.008.
- Marklin, Richard W., Kyle A. Saginus, Patricia Seeley, and Stephen H. Freier. 2010. “Comparison of Anthropometry of US Electric Utility Field-Workers with North American General Populations.” Human Factors 52 (6): 643–662. doi:https://doi.org/10.1177/0018720810383012.
- Martin, R., and K. Saller. 1966. Lehrbuch Der Anthropologie. Stuttgart: Fischer, 1957.
- Mashiko, Miyoshi. 2006. Clothing Modelling Learning: Theory. Translated by Zheng Rong. Beijing: China Textile&Apparel Press.
- Olds, Tim, Nathan Daniell, John Petkov, and Arthur David Stewart. 2013. “Somatotyping Using 3D Anthropometry: A Cluster Analysis.” Journal of Sports Sciences 31 (9): 936–944. doi:https://doi.org/10.1080/02640414.2012.759660.
- Park, J., and K. Langseth-Schmidt. 2016. “Anthropometric Fit Evaluation of Firefighters’ Uniform Pants: A Sex Comparison.” International Journal of Industrial Ergonomics 56: 1–8. doi:https://doi.org/10.1016/j.ergon.2016.08.011.
- Peres, S. C., R. K. Mehta, and P. Ritchey. 2017. “Assessing Ergonomic Risks of Software: Development of the SEAT.” Applied Ergonomics 59 (Pt A): 377–386. doi:https://doi.org/10.1016/j.apergo.2016.09.014.
- Song, H. K., and S. P. Ashdown. 2011. “Categorization of Lower Body Shapes for Adult Females Based on Multiple View Analysis.” Textile Research Journal 81 (9): 914–931. doi:https://doi.org/10.1177/0040517510392448.
- Stewart, A., R. Ledingham, and H. Williams. 2017. “Variability in Body Size and Shape of UK Offshore Workers: A Cluster Analysis Approach.” Applied Ergonomics 58: 265–272. doi:https://doi.org/10.1016/j.apergo.2016.07.001.
- Sung, M., and H. Makabe. 2004. “A Comparison of the Body Type Between Korean and Japanese Young Female Adults-Mainly on Determined Values.” Journal-Japan Research Association for Textile End USES 45 (6): 28–35.
- The State Administration of Quality Supervision, Inspection and Quarantine of the PRC. 2009. The People’s Republic of China’s National Standard Clothing Size Men: Clothing Size Men. China Standard Press.
- Thomassey, S., and P. Bruniaux. 2013. “A Template of Ease Allowance for Garments Based on a 3D Reverse Methodology.” International Journal of Industrial Ergonomics 43 (5): 406–416. doi:https://doi.org/10.1016/j.ergon.2013.08.002.
- Vuruskan, Arzu, and Ender Bulgun. 2011. “Identification of Female Body Shapes Based on Numerical Evaluations.” International Journal of Clothing Science and Technology 23 (1): 46–60. doi:https://doi.org/10.1108/09556221111096732.
- Wang, C. C. L., T. K. K. Chang, and M. M. F. Yuen. 2003. “From Laser-Scanned Data to Feature Human Model: A System Based on Fuzzy Logic Concept.” Computer-Aided Design 35 (3): 241–253. doi:https://doi.org/10.1016/S0010-4485(01)00209-3.
- Wuhrer, S., Z. B. Azouz, and C. Shu. 2010. “Semi-Automatic Prediction of Landmarks on Human Models in Varying Poses.” 2010 Canadian Conference on Computer and Robot Vision, IEEE, 136–142. doi:https://doi.org/10.1109/CRV.2010.25.
- Yan, G. E., and L. I. U. Guolian. 2007. “Study on Photogrammetric Measurement of Body in Apparel Industry.” Journal of Textile Research 28 (10): 78–81.
- Zhang, Jun, Noriaki Innami, Kyoung Ok Kim, and Masayuki Takatera. 2015. “Upper Garment 3D Modeling for Pattern Making.” International Journal of Clothing Science and Technology 27 (6): 852–869. doi:https://doi.org/10.1108/IJCST-01-2015-0003.
- Zhou, Xiaojing, Jinxiang Chen, Guohua Chen, Zhengxu Zhao, and Yong Zhao. 2016. “Anthropometric Body Modeling Based on Orthogonal-View Images.” International Journal of Industrial Ergonomics 53: 27–36. doi:https://doi.org/10.1016/j.ergon.2015.10.007.