References
- M. S. Khan, D. Fon, X. Li, J. F. Tian, J. Forsythe, G. Garnier, and W. Shen, Biosurface engineering through ink jet printing. Colloid Surf. B-Biointerfaces 75, 441–447 (2010).
- D. Radulescu, S. Dhar, C. M. Young, D. W. Taylor, H. J. Trost, D. J. Hayes, and G. R. Evans, Tissue engineering scaffolds for nerve regeneration manufactured by ink-jet technology. Mater. Sci. Eng. C-Biomimetic Supramol. Syst. 27, 534–539 (2007).
- N. Caro, E. Medina, M. Diaz-Dosque, L. Lopez, L. Abugoch, and C. Tapia, Novel active packaging based on films of chitosan and chitosan/quinoa protein printed with chitosan-tripolyphosphate-thymol nanoparticles via thermal ink-jet printing. Food Hydrocolloids 52, 520–532 (2016).
- C. M. Magin, D. L. Alge, and K. S. Anseth, Bio-inspired 3d microenvironments: A new dimension in tissue engineering. Biomed. Mater. 11, 12 (2016).
- Y. T. Kwon, Y. I. Lee, K. J. Lee, Y. M. Choi, and Y. H. Choa, A novel method for fine patterning by piezoelectrically induced pressure adjustment of inkjet printing. J. Electron. Mater. 44, 2608–2614 (2015).
- R. Lesyuk, W. Jillek, Y. Bobitski, and Kotlyarchuk, B, Low-energy pulsed laser treatment of silver nanoparticles for interconnects fabrication by ink-jet method. MiEng. 88, 318–321 (2011).
- H. S. Yang, B. J. Kang, and J. H. Oh, Control of evaporation behavior of an inkjet-printed dielectric layer using a mixed-solvent system. JEMat 45, 755–763 (2016).
- K. Ryu, Y. J. Moon, K. Park, J. Y. Hwang, and S. J. Moon, Electrical property and surface morphology of silver nanoparticles after thermal sintering. JEMat 45, 312–321 (2016).
- D. L. Kabir, I. Mejia, M. R. Perez, J. C. Ramos-Hernandez, and M. A. Quevedo-Lopez, Optimization of inkjet-printed 6,13-bis(triisopropylsilylethynyl) pentacene using photolithography-defined structures. JEMat 44, 490–496 (2015).
- L. Jacot-Descombes, M. R. Gullo, V. J. Cadarso, M. Mastrangeli, O. Ergeneman, C. Peters, P. Fatio, M. A. Freidy, C. Hierold, and B. J. Nelson, et al., Inkjet printing of high aspect ratio superparamagnetic su-8 microstructures with preferential magnetic directions. Micromachines 5, 583–593 (2014).
- V. J. Cadarso, G. Smolik, V. Auzelyte, L. Jacot-Descombes, and Brugger, J, Heterogeneous material micro-transfer by ink-jet print assisted mould filling. MiEng 98, 619–622 (2012).
- H. M. El-Hennawi, A. A. Shahin, and M. Rekaby, A. A. Ragheb, Ink jet printing of bio-treated linen, polyester fabrics and their blend. Carbohydr. Polym. 118, 235–241 (2015).
- H. S. Lee, I. Park, K. S. Jeon, and E. H. Lee, Fabrication of micro-lenses for optical interconnection using micro ink-jetting technique. Microelectron. Eng. 87, 1447–1450 (2010).
- Y. F. Liu, M. H. Tsai, Y. F. Pai, and W. S. Hwang, Control of droplet formation by operating waveform for inks with various viscosities in piezoelectric inkjet printing. Appl. Phys. A-Mater. Sci. Process. 111, 509–516 (2013).
- L. Basirico, P. Cosseddu, A. Scida, B. Fraboni, G. G. Malliaras, and Bonfiglio, A, Electrical characteristics of ink-jet printed, all-polymer electrochemical transistors. Org. Electron. 13, 244–248 (2012).
- I. Kim, Y. A. Song, H. C. Jung, J. W. Joung, S. S. Ryu, and Kim, J, Effect of microstructural development on mechanical and electrical properties of inkjet-printed ag films. JEMat 37, 1863–1868 (2008).
- H. C. Jung, S. H. Cho, J. W. Joung, and Y. S. Oh, Studies on inkjet-printed conducting lines for electronic devices. JEMat 36, 1211–1218 (2007).
- E. Fribourg-Blanc, D. M. T. Dang, and C. M. Dang, Characterization of silver nanoparticle based inkjet printed lines. Microsyst. Technol. 19, 1961–1971 (2013).
- D. H. Lee, K. T. Lim, E. K. Park, J. M. Kim, and Y. S. Kim, Optimized ink-jet printing condition for stable and reproducible performance of organic thin film transistor. MiEng 111, 242–246 (2013).
- B. Ando, and Marletta, V, An all-inkjet printed bending actuator with embedded sensing feature and an electromagnetic driving mechanism. Actuators 5, 11 (2016).
- http://www.industrialij.com/ (2016.11.10),
- Wijshoff, H. The dynamics of the piezo inkjet printhead operation. PhR 491, 77–177 (2010).
- K. Li, J. Liu, W. Chen, L. Ye, and Zhang, L, A novel bearing lubricating device based on the piezoelectric micro-jet. Applied Sciences 6, 38 (2016).
- M. H. Tsai, and W. S. Hwang, Effects of pulse voltage on the droplet formation of alcohol and ethylene glycol in a piezoelectric inkjet printing process with bipolar pulse. Mater. Trans. 49, 331–338 (2008).
- K. Rahman, A. Khan, N. M. Nam, K. H. Choi, and D. S. Kim, Study of drop-on-demand printing through multi-step pulse voltage. Int. J. Precis. Eng. Manuf. 12, 663–669 (2011).
- Y. J. Kim, S. Kim, J. Hwang, and Y. J. Kim, Drop-on-demand hybrid printing using a piezoelectric mems printhead at various waveforms, high voltages and jetting frequencies. JMiMi 23, 8 (2013).
- K. Li, J.-k. Liu, W.-s. Chen, and L. Zhang, Effects of pulse voltage on piezoelectric micro-jet for lubrication. Microsystem Technologies 1–9 (2016).
- H. C. Wu, T. R. Shan, W. S. Hwang, and H. J. Lin, Study of micro-droplet behavior for a piezoelectric inkjet printing device using a single pulse voltage pattern. Mater. Trans. 45, 1794–1801 (2004).
- H. J. Lin, H. C. Wu, T. R. Shan, and W. S. Hwang, The effects of operating parameters on micro-droplet formation in a piezoelectric inkjet printhead using a double pulse voltage pattern. Mater. Trans. 47, 375–382 (2006).
- H. C. Wu, H. J. Lin, Y. C. Kuo, and W. S. Hwang, Simulation of droplet ejection for a piezoelectric inkjet printing device. Mater. Trans. 45, 893–899 (2004).
- M. Rosello, G. Maitrejean, and D. C. D. Roux, Jay, P, Numerical investigation of the influence of gravity on the rayleigh-plateau jet instability. FlDyR 48, 13 (2016).
- T. Lim, J. Jeong, J. Chung, and J. T. Chung, Evaporation of inkjet printed pico-liter droplet on heated substrates with different thermal conductivity. Journal of Mechanical Science and Technology 23, 1788–1794 (2009).
- P. Ferraro, S. Coppola, S. Grilli, M. Paturzo, and V. Vespini, Dispensing nano-pico droplets and liquid patterning by pyroelectrodynamic shooting. Nature Nanotechnology 5, 429–435 (2010).
- V. Vespini, S. Coppola, M. Todino, M. Paturzo, V. Bianco, S. Grilli, and P. Ferraro, Forward electrohydrodynamic inkjet printing of optical microlenses on microfluidic devices. LChip 16, 326 (2015).
- K. Li, J.-k. Liu, W.-s. Chen, L. Ye, and Zhang, L, Research on the injection performance of a novel lubricating device based on piezoelectric micro-jet technology. JEMat 45, 4380–4389 (2016).
- O. Gennari, L. Battista, B. Silva, S. Grilli, L. Miccio, V. Vespini, S. Coppola, P. Orlando, L. Aprin, and P. Slangen, et al., Investigation on cone jetting regimes of liquid droplets subjected to pyroelectric fields induced by laser blasts. Appl. Phys. Lett. 106, 054103 (2015).