References
- H. Q. Zhang et al., Effect of PEG6000 on magnetic properties of the Mn-Zn ferrite nanoparticles, J. Magn. Magn. Mater. 439, 245 (2017). DOI: 10.1016/j.jmmm.2017.04.089.
- R. Arulmurugan et al., Effect of zinc substitution on Co–Zn and Mn–Zn ferrite nanoparticles prepared by co-precipitation, J. Magn. Magn. Mater. 288, 470 (2005). DOI: 10.1016/j.jmmm.2004.09.138.
- A. Zapata, and G. Herrera, Effect of zinc concentration on the microstructure and relaxation frequency of Mn–Zn ferrites synthesized by solid state reaction, Ceram. Int. 39 (7), 7853 (2013). DOI: 10.1016/j.ceramint.2013.03.046.
- S. F. Wang et al., Effects of additives on the loss characteristics of Mn–Zn ferrite, J. Magn. Magn. Mater. 365, 119 (2014). DOI: 10.1016/j.jmmm.2014.04.043.
- V. Tsakaloudi, and V. Zaspalis, Synthesis of a low loss Mn–Zn ferrite for power applications, J. Magn. Magn. Mater. 400, 307 (2016). DOI: 10.1016/j.jmmm.2015.07.064.
- M. L. Li et al., Synthesis and characterization of MnZn ferrite nanoparticles with improved saturation magnetization, J. Supercond. Nov. Magn. 30 (8), 2275 (2017). DOI: 10.1007/s10948-017-4013-9.
- M. L. Li et al., Synthesis and characterization of nanosized MnZn ferrites via a modified hydrothermal method, J. Magn. Magn. Mater. 439, 228 (2017). DOI: 10.1016/j.jmmm.2017.04.015.
- H. Mohseni et al., Magnetic and structural studies of the Mn-doped Mg–Zn ferrite nanoparticles synthesized by the glycine nitrate process, J. Magn. Magn. Mater. 324 (22), 3741 (2012). DOI: 10.1016/j.jmmm.2012.06.009.
- A. Huang et al., Study on electromagnetic properties of MnZn ferrites with Fe-poor composition, Mater. Chem. Phys. 105 (2–3), 303 (2007). DOI: 10.1016/j.matchemphys.2007.04.067.
- E. Peng et al., Ferrite-based soft and hard magnetic structures by extrusion free-forming, RSC Adv. 7 (43), 27128 (2017). DOI: 10.1039/C7RA03251J.
- L. Gorjan et al., Kinetics and equilibrium of Eco-debinding of PZT ceramics shaped by thermoplastic extrusion, J. Eur. Ceram. Soc. 37 (16), 5273 (2017). DOI: 10.1016/j.jeurceramsoc.2017.04.063.
- F. G. Harold, M. M. Eldridge, and R. W. John, Extrusion: The Definitive Processing Guide and Handbook Plastics Design Library (William Andrew, Norwich, NY, 2007), pp. 291.
- D. E. Crawford et al., Continuous multi-step synthesis by extrusion–telescoping solvent-free reactions for greater efficiency, Chem. Commun. 53 (97), 13067 (2017). DOI: 10.1039/C7CC06010F.
- G. P. Jiang, and J. F. Yang, Extrusion of highly porous silicon nitride ceramics with bimodal pore structure and improved gas permeability, J. Am. Ceram. Soc. 101 (2), 520 (2018). DOI: 10.1111/jace.15265.
- A. Ghazanfari et al., Mechanical characterization of parts produced by ceramic on‐demand extrusion process, Int. J. Appl. Ceram. Technol. 14 (3), 486 (2017). DOI: 10.1111/ijac.12665.
- A. Mat et al., Investigation of micro-tube solid oxide fuel cell fabrication using extrusion method, Int. J. Hydro. Energy. 41 (23), 10037 (2016). DOI: 10.1016/j.ijhydene.2015.12.203.
- J. Qu et al., Fabrication and properties of PZT piezoelectric ceramic tubes with large length–diameter ratio, Ceram. Int. 40 (8), 13019 (2014). DOI: 10.1016/j.ceramint.2014.04.165.
- Y. Fujishiro et al., Challenge for the development of micro SOFC manufacturing technology, Synth. Eng. Ed. 4 (1), 45 (2011). DOI: 10.5571/syntheng.4.45.
- L. F. Xu et al., Fabrication of niobium doped Pb (Zr, Ti) O3 fibers by viscous polymer processing, Trans. Nonfer. Metals Soc. Chin. 16, 29 (2006).