Study on the microstructure and anisotropy of (Fe,Cr)₇C₃/Fe surface gradient composite produced by solid reaction process

References

• J. Hu et al., Effect of forging on microstructure and mechanical properties of titanium matrix composites reinforced by TiC particulates, Mater. Sci. Eng. Powder Metall. 17 (6), 735 (2012).
   Google Scholar
• F. Ye et al., Microstructure, microhardness and wear resistance of VCp/Fe surface composites fabricated in situ, Appl. Surf. Sci. 280 (8), 297 (2013). DOI: 10.1016/j.apsusc.2013.04.152.
   Google Scholar
• F. Ye et al., Volume fraction effect of V8C7 particulates on impact toughness and wear performance of V8C7/Fe monolithic composites, J. Mater. Eng. Perform. 23 (4), 1402 (2014). DOI: 10.1007/s11665-013-0853-z.
   Web of Science ®Google Scholar
• Q. Li, Y. Lei, and H. Fu, Growth characteristics and reinforcing behavior of in-situ NbCp in laser cladded Fe-based composite coating, J. Mater. Sci. Technol. 31 (7), 766 (2015). DOI: 10.1016/j.jmst.2014.06.012.
   Web of Science ®Google Scholar
• Q. Li, Y. Lei, and H. Fu, Laser cladding in-situ NbC particle reinforced Fe-based composite coatings with rare earth oxide addition, Surf. Coat. Technol. 239, 102 (2014). DOI: 10.1016/j.surfcoat.2013.11.026.
   Web of Science ®Google Scholar
• N. Zhao, Y. Xu, and Y. Fu, Mechanical properties of one-step in situ synthesized NbC-Fe composite coating, Surf. Coat. Technol. 309 (15), 1105 (2017). DOI: 10.1016/j.surfcoat.2016.08.075.
   Google Scholar
• N. Zhao et al., Microstructure and wear properties of niobium carbide particulates gradient-distribution composite layer fabricated in situ, Ceram. Int. 42 (16), 18507 (2016). DOI: 10.1016/j.ceramint.2016.08.188.
   Web of Science ®Google Scholar
• X. Cai et al., Investigation of the adhesion strength and deformation behaviour of insitu fabricated NbC coatings by scratch testing, Surf. Coat. Technol. 299, 135 (2016). DOI: 10.1016/j.surfcoat.2016.05.004.
   Web of Science ®Google Scholar
• X. B. Liu et al., Study on microstructure and wear resistance of plasma jet clad γ/Cr7C3 composite coating, T. Mater. Heat Treat. 27 (6), 114 (2006).
   Google Scholar
• F. X. Ye et al., (Fe,Cr)7C3/Fe surface gradient composite: microstructure, microhardness, and wear resistance, Mater. Chem. Phys. 147 (3), 823 (2014). DOI: 10.1016/j.matchemphys.2014.06.026.
   Web of Science ®Google Scholar
• L. Niu, Y. Xu, and X. Wang, Fabrication of WC/Fe composite coating by centrifugal casting plus in-situ synthesis techniques, Surf. Coat. Technol. 205 (2), 551 (2010). DOI: 10.1016/j.surfcoat.2010.07.031.
   Web of Science ®Google Scholar
• L. Niu, M. Hojamberdiev, and Y. Xu, Preparation of in situ-formed WC/Fe composite on gray cast iron substrate by a centrifugal casting process, J. Mater. Pro. Technol. 210 (14), 1986 (2010). DOI: 10.1016/j.jmatprotec.2010.07.013.
   Web of Science ®Google Scholar
• S. Zhou, and X. Zeng, Growth characteristics and mechanism of carbides precipitated in WC-Fe composite coatings by laser induction hybrid rapid cladding, J. Alloy. Compd. 505 (2), 685 (2010). DOI: 10.1016/j.jallcom.2010.06.115.
   Web of Science ®Google Scholar
• K. Hirota et al., Simultaneous synthesis and consolidation of chromium carbides (Cr3C2, Cr7C3 and Cr23C6) by pulsed electric-current pressure sintering, Mater. Sci. Eng. A 399 (1–2), 154 (2005). DOI: 10.1016/j.msea.2005.02.062.
   Web of Science ®Google Scholar
• S. J. Hao, High-Chromium Wear Resistant Cast Iron (Coal Industry Press, China, 1992), p. 86.
   Google Scholar
• A. Kootsookos, and J. D. Gates, The role of secondary carbide precipitation on the fracture toughness of a reduced carbon white iron, Mater. Sci. Eng. A 490 (1–2), 313 (2008). DOI: 10.1016/j.msea.2008.01.036.
   Web of Science ®Google Scholar
• A. Wiengmoon et al., Microstructural and crystallographical study of carbides in 30wt.% Cr cast irons, Acta Mater. 53 (15), 4143 (2005). DOI: 10.1016/j.actamat.2005.05.019.
   Web of Science ®Google Scholar
• C. M. Chang et al., Microstructure and wear characteristics of hypereutectic Fe-Cr-C cladding with various carbon contents, Surf. Coat. Technol. 205 (2), 245 (2010). DOI: 10.1016/j.surfcoat.2010.06.021.
   Web of Science ®Google Scholar
• H. Liu et al., Effects of cryogenic treatment on microstructure and abrasion resistance of CrMnB high-chromium cast iron subjected to sub-critical treatment, Mater. Sci. Eng. A 478 (1–2), 324 (2008). DOI: 10.1016/j.msea.2007.06.012.
   Web of Science ®Google Scholar
• P. Fox et al., Interface interactions between porous titanium/tantalum coatings produced by Selective Laser Melting (SLM) on a cobalt-chromium alloy, Surf. Coat. Technol 202 (20), 5001 (2008). DOI: 10.1016/j.surfcoat.2008.05.003.
   Web of Science ®Google Scholar
• Y. F. Liu et al., Microstructure and dry-sliding wear resistance of PTA clad (Cr, Fe)7C3/γ-Fe ceramal surface composites, Appl. Surf. Sci. 252 (20), 7539 (2006). DOI: 10.1016/j.apsusc.2005.09.008.
   Web of Science ®Google Scholar