References
- H. W. Kim et al., Piezoelectric energy harvesting under high pre-stressed cyclic vibrations, J. Electroceram. 15 (1), 27 (2005). DOI: 10.1007/s10832-005-0897-z.
- S. Priya, Advances in energy harvesting using low profile piezoelectric transducers, J. Electroceram. 19 (1), 167 (2007). DOI: 10.1007/s10832-007-9043-4.
- K. Tang et al., Power performance of circular piezoelectric diaphragm generators, Front. Mech. Eng. China 3 (4), 434 (2008). DOI: 10.1007/s11465-008-0069-3.
- H. Song et al., Multilayer piezoelectric energy scavenger for large current generation, J. Electroceram. 23 (2-4), 301 (2009). DOI: 10.1007/s10832-008-9439-9.
- M. S. Woo et al., Study on the strain effect of a piezoelectric energy harvesting module, Ferroelectrics 449 (1), 33 (2013). DOI: 10.1080/00150193.2013.822765.
- Z. W. Zhang, H. J. Xiang, and Z. F. Shi, Theoretical modeling on piezoelectric energy harvesting from bridges considering roadway surface irregularities, Transportation Research Congress, 673 (2018). DOI: 10.1061/9780784481240.067.
- G. Ding et al., Effect of subgrade on piezoelectric energy harvesting under traffic loads, Int. J. Pavement Eng. 19 (8), 661 (2018). DOI: 10.1080/10298436.2017.1413241.
- C. Wang et al., Optimization design and experimental investigation of piezoelectric energy harvesting devices for pavement, Appl. Energ. 229, 18 (2018). DOI: 10.1016/j.apenergy.2018.07.036.
- X. Xu et al., Application of piezoelectric transducer in energy harvesting in pavement, Int. J. Pavement Res. Technol. 11 (4), 388 (2018). DOI: 10.1016/j.ijprt.2017.09.011.
- C. Wang et al., Preparation and performance research of stacked piezoelectric energy-harvesting units for pavements, Energ. Buildings 183, 581 (2019). DOI: 10.1016/j.enbuild.2018.11.042.
- H. Lee et al., Design of a piezoelectric energy-harvesting shock absorber system for a vehicle, Integr. Ferroelectr. 141 (1), 32 (2013). DOI: 10.1080/10584587.2013.778724.
- H. Zhao, L. Qin, and J. Ling, Test and analysis of bridge transducers for harvesting energy from asphalt pavement, Int. J. Transp. Sci. Technol. 4 (1), 17 (2015). DOI: 10.1260/2046-0430.4.1.17.
- L. Guo and Q. Lu, Numerical analysis of a new piezoelectric-based energy harvesting pavement system: lessons from laboratory-based and field-based simulations, Appl. Energ. 235, 963 (2019). DOI: 10.1016/j.apenergy.2018.11.037.
- Y. Niu et al., Prototype modeling of pile-type piezoelectric transducer for harvesting energy from vehicle load, Transportation Research Congress, 374 (2018). DOI: 10.1061/9780784481240.039.
- Z. Zhang, H. Xiang, and Z. Shi, Modeling on piezoelectric energy harvesting from pavements under traffic loads, J. Intel. Mat. Syst. Str. 27 (4), 567 (2016). DOI: 10.1177/1045389x15575081.
- W. Hwang et al., Watts-level road-compatible piezoelectric energy harvester for a self-powered temperature monitoring system on an actual roadway, Appl Energ. 243, 313 (2019). DOI: 10.1016/j.apenergy.2019.03.122.
- J. Y. Cho et al., A multifunctional road-compatible piezoelectric energy harvester for autonomous driver-assist LED indicators with a self-monitoring system, Appl. Energ. 242, 294 (2019). DOI: 10.1016/j.apenergy.2019.03.075.
- G. Ding, J. Wu, and J. Wang, Experimental study on vibration reduction by using soilbag cushions under traffic loads, Geosynth. Int. 25, 1 (2018). DOI: 10.1680/jgein.18.00010.