References
- M. C. Giuffrida, and G. Spoto, Integration of isothermal amplification methods in microfluidic devices: recent advances, Biosens. Bioelectron. 90, 174 (2017). DOI: 10.1016/j.bios.2016.11.045.
- T. A. Balbino et al., Integrated microfluidic devices for the synthesis of nanoscale liposomes and lipoplexes, Colloids Surf B Biointerfaces 152, 406 (2017). DOI: 10.1016/j.colsurfb.2017.01.030.
- H. H. Kim et al., Design and modeling of piezoelectric pump for microfluid devices, Ferroelectrics 378 (1), 92 (2009).
- A. Kecskemeti et al., Development of an enzymatic reactor applying spontaneously adsorbed trypsin on the surface of a PDMS microfluidic device, Anal. Bioanal. Chem. 409 (14), 3573 (2017). DOI: 10.1007/s00216-017-0295-9.
- S. Puza et al., Fabrication of cyclo olefin polymer microfluidic devices for trapping and culturing of yeast cells, Biomed. Microdevices 19, 40 (2017).
- N. Tottori, T. Hatsuzawa, and T. Nisisako, Separation of main and satellite droplets in a deterministic lateral displacement microfluidic device, RSC Adv. 7 (56), 35516 (2017).
- C. Eid, S. S. Branda, and R. J. Meagher, A rapidly-prototyped microfluidic device for size-based nucleic acid fractionation using isotachophoresis, Analyst 142 (12), 2094 (2017).
- N. P. Macdonald et al., Comparing microfluidic performance of three-dimensional (3D) printing platforms, Anal. Chem. 89 (7), 3858 (2017). DOI: 10.1021/acs.analchem.7b00136.
- S. Kipper et al., Control and automation of multilayered integrated microfluidic device fabrication, Lab Chip. 17 (3), 557 (2017). DOI: 10.1039/c6lc01534d.
- K. T. Wu et al., Transition from turbulent to coherent flows in confined three-dimensional active fluids, Science 355 (6331), eaal1979 (2017).
- J. R. Anderson et al., Fabrication of topologically complex three-dimensional microfluidic systems in PDMS by rapid prototyping, Anal. Chem. 72 (14), 3158 (2000). DOI: 10.1021/ac9912294.
- H. Liu, and R. M. Crooks, Three-dimensional paper microfluidic devices assembled using the principles of origami, J. Am. Chem. Soc. 133 (44), 17564 (2011). DOI: 10.1021/ja2071779.
- A. W. Martinez, S. T. Phillips, and G. M. Whitesides, Three-dimensional microfluidic devices fabricated in layered paper and tape, Proc. Natl. Acad. Sci. 105 (50), 19606 (2008). DOI: 10.1073/pnas.0810903105.
- M. Mullenborn, H. Dirac, and J. W. Petersen, Three-dimensional nanostructurres by direct laser etching of Si, Appl. Surf. Sci. 86, 568 (1995).
- K. Abe, K. Suzuki, and D. Citterio, Inkjet-printed microfluidic multianalyte chemical sensing paper, Anal. Chem. 80 (18), 6928 (2008). DOI: 10.1021/ac800604v.
- X. Li, D. R. Ballerini, and W. Shen, A perspective on paper-based microfluidics: Current status and future trends, Biomicrofluidics 6 (1), 11301 (2012). DOI: 10.1063/1.3687398.
- K. Abe et al. , Inkjet-printed paperfluidic immuno-chemical sensing device , Anal. Bioanal. Chem. 398 (2), 885 (2010). DOI: 10.1007/s00216-010-4011-2.
- J. L. Delaney et al., Electrogenerated chemiluminescence detection in paper-based microfluidic sensors, Anal. Chem. 83 (4), 1300 (2011). DOI: 10.1021/ac102392t.
- L. W. Dong et al., Splitting droplets in a channel by help of surface acoustic wave, Ferroelectrics 502 (1), 19 (2016).
- U. Toyokazu, S. Takayuki, and S. Showko, Investigation of acoustic streaming excited by surface acoustic waves, in IEEE Ultrasonics Symposium, New York, NY, 7–10 Nov. 1995, pp. 1081–1084.