Reference
- N. Chen et al., A piezoelectric impact-induced vibration cantilever energy harvester from speed bump with a low-power power management circuit, Sens. Actuators, A 254, 134 (2017). DOI: https://doi.org/10.1016/j.sna.2016.12.006.
- L. Gu, Low-frequency piezoelectric energy harvesting prototype suitable for the MEMS implementation, Microelectron. J. 42 (2), 277 (2011). DOI: https://doi.org/10.1016/j.mejo.2010.10.007.
- M. Zhou et al., Piezoelectric wind energy harvesting device based on the inverted cantilever beam with leaf-inspired extensions, AIP Adv. 9 (3), 035213 (2019). DOI: https://doi.org/10.1063/1.5082811.
- E. L. Pradeesh and S. Udhayakumar, Investigation on the geometry of beams for piezoelectric energy harvester, Microsyst. Technol. 25 (9), 3463 (2019). DOI: https://doi.org/10.1007/s00542-018-4220-8.
- E.L. Pradeesh, S. Udhayakumar, M.G. Vasundhara, V. Vadivel Vivek, Vibration Based Piezoelectric Energy Harvesting - A Review, IOP Conf. Series: Materials Science and Engineering 995, 012007 (2020). DOI:https://doi.org/10.1088/1757-899X/995/1/012007.
- K. A. Cook-Chennault et al., Powering MEMS portable devices—a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems, Smart Mater. Struct. 17 (4), 043001 (2008). DOI: https://doi.org/10.1088/0964-1726/17/4/043001.
- J. Granstrom et al., Energy harvesting from a backpack instrumented with piezoelectric shoulder straps, Smart Mater. Struct. 16 (5), 1810 (2007). DOI: https://doi.org/10.1088/0964-1726/16/5/036.
- M. H. Ansari and M. A. Karami, Experimental investigation of fan-folded piezoelectric energy harvesters for powering pacemakers, Smart Mater. Struct. 26 (6), 065001 (2017). DOI: https://doi.org/10.1088/1361-665X/aa6cfd.
- S. D. Psoma et al., A practical application of energy harvesting based on piezoelectric technology for charging portable electronic devices, in Materials Today: Proceedings (Hoboken, New Jersey, Elsevier Ltd., 2017), Vol. 4, pp. 6771–6785. DOI: https://doi.org/10.1016/j.matpr.2017.07.004.
- Y. Li et al., Vibration energy harvesting in vehicles by gear segmentation and a virtual displacement filtering algorithm, Int. J. Energy Res. 42 (4), 1702 (2018). DOI: https://doi.org/10.1002/er.3975.
- P. J. Cornwell et al., Enhancing power harvesting using a tuned auxiliary structure, J. Intell. Mater. Syst. Struct. 16 (10), 825 (2005). DOI: https://doi.org/10.1177/1045389X05055279.
- L. M. Miller et al., Integration of a low frequency, tunable MEMS piezoelectric energy harvester and a thick film micro capacitor as a power supply system for wireless sensor nodes, In 2009 IEEE Energy Conversion Congress and Exposition, ECCE 2009, 2009, pp. 2627–2634. DOI: https://doi.org/10.1109/ECCE.2009.5316243.
- M. G. Vasundhara et al., A distributed parametric model of Brinson shape memory alloy based resonant frequency tunable cantilevered PZT energy harvester, Int. J. Mech. Mater. Des. 15 (3), 555 (2019). DOI: https://doi.org/10.1007/s10999-018-9429-2.
- M. G. Vasundhara et al., A distributed parametric model of shape memory alloy-based resonant frequency tunable cantilevered PZT energy harvester with tip mass, ISSS J. Micro Smart Syst. 8 (1), 13 (2019). DOI: https://doi.org/10.1007/s41683-019-00034-0.
- M. Senthilkumar et al., Electromechanical analytical model of shape memory alloy based tunable cantilevered piezoelectric energy harvester, Int. J. Mech. Mater. Des. 15 (3), 611 (2019). DOI: https://doi.org/10.1007/s10999-018-9413-x.
- X. Wu and D. W. Lee, Miniaturized piezoelectric energy harvester for battery-free portable electronics, Int. J. Energy Res. 43 (6), 2402 (2019). DOI: https://doi.org/10.1002/er.4431.
- G. Min, Power supply sources for smart textiles, in Smart Clothes and Wearable Technology (Southfield, Michigan, Elsevier Ltd., 2009), pp. 214–231. DOI: https://doi.org/10.1533/9781845695668.2.214.
- Y. C. Rx Gao, Vibration-based sensor powering for manufacturing process monitoring, Trans. North Am. Manuf. Res. Inst. SME 33, 335 (2005).
- E. L. Pradeesh and S. Udhayakumar, Effect of placement of piezoelectric material and proof mass on the performance of piezoelectric energy harvester, Mech. Syst. Sig. Process. 130, 664 (2019). DOI: https://doi.org/10.1016/j.ymssp.2019.05.044.
- E. L. Pradeesh et al., Investigation on various beam geometries for piezoelectric energy harvester with two serially mounted piezoelectric materials, SN Appl. Sci. 1 (12), 1 (2019). DOI: https://doi.org/10.1007/s42452-019-1709-4.
- H. A. Sodano et al., Comparison of piezoelectric energy harvesting devices for recharging batteries, J. Intell. Mater. Syst. Struct. 16 (10), 799 (2005). DOI: https://doi.org/10.1177/1045389X05056681.