References
- J. Wu, D. Xiao, and J. Zhu, Potassium-sodium niobate lead-free piezoelectric materials: past, present, and future of phase boundaries, Chem. Rev. 115 (7), 2559 (2015). DOI: https://doi.org/10.1021/cr5006809.
- N. Ledermann et al., {100}-Textured, piezoelectric Pb(ZrxTi1-x)O3 thin films for MEMS: integration, deposition and properties, Sens. Actuat. A 105 (2), 162 (2003). DOI: https://doi.org/10.1016/S0924-4247(03)00090-6.
- R. Guo et al., Origin of the high piezoelectric response in PbZr1-xTixO3, Phys. Rev. Lett. 84 (23), 5423 (2000). DOI: https://doi.org/10.1103/PhysRevLett.84.5423.
- L. Bellaiche, A. Garcia, and D. Vanderbilt, Finite-temperature properties of Pb(Zr1-xTi(x))O3 alloys from first principles , Phys. Rev. Lett. 84 (23), 5427 (2000). DOI: https://doi.org/10.1103/PhysRevLett.84.5427.
- T. Zheng et al., Recent development in lead-free perovskite piezoelectric bulk materials, Prog. Mater. Sci. 98 (1), 552 (2018). DOI: https://doi.org/10.1016/j.pmatsci.2018.06.002.
- G. A. Smolenskii, New ferroelectrics of complex composition IV, Phys. Solid State 2 (11), 2651 (1961).
- Y. Saito et al., Lead-free piezoceramics, Nature 432 (7013), 84 (2004). DOI: https://doi.org/10.1038/nature03028.
- Y. Xu et al., Fabrication of (K, Na)NbO3 lead-free piezoceramic microrod arrays by sol-gel processing with micromachined silicon templates, J. Am. Ceram. Soc. 91 (9), 2844 (2008). DOI: https://doi.org/10.1111/j.1551-2916.2008.02582.x.
- H. Gu et al., Synthesis of (K, Na) (Nb, Ta)O3 lead-free piezoelectric ceramic powders by high temperature mixing method under hydrothermal conditions, Ceram. Int. 38 (3), 1807 (2012). DOI: https://doi.org/10.1016/j.ceramint.2011.10.003.
- J. Liu et al., Effects of CuO doping on the electrical properties of 0.98K0.5Na0.5NbO3-0.02BiScO3 lead-free piezoelectric ceramics, Mater. Lett. 65 (6), 948 (2011). DOI: https://doi.org/10.1016/j.matlet.2010.12.058.
- T. Bongkarn et al., Excellent piezoelectric and ferroelectric properties of KNLNTS ceramics with Fe2O3 doping synthesized by the solid-state combustion technique, J. Alloys Compd. 682 (1), 14 (2016). DOI: https://doi.org/10.1016/j.jallcom.2016.04.285.
- Y. Zhao et al., Domain evolution and corresponding piezoelectricity of lead-free In2O3-doped K0.5Na0.5NbO3 ceramics together with improved fatigue resistance and temperature stability, J. Mater. Sci. Eng. B 243 (1), 141 (2019). DOI: https://doi.org/10.1016/j.mseb.2019.04.010.
- X. Vendrell et al., Improving the functional properties of (K0.5Na0.5)NbO3 piezoceramics by acceptor doping, J. Eur. Ceram. Soc. 35 (1), 125 (2015). DOI: https://doi.org/10.1016/j.jeurceramsoc.2014.08.033.
- C. Long et al., Li-substituted K0.5Na0.5NbO3-based piezoelectric ceramics: Crystal structures and the effect of atmosphere on electrical properties, J. Alloys Compd. 658 (1), 839 (2016). DOI: https://doi.org/10.1016/j.jallcom.2015.10.245.
- R. Zhao et al., Phase structure regulation and enhanced piezoelectric properties of Li-doped KNN-based ceramics, Mater. Chem. Phys. 245 (1), 122806 (2020). DOI: https://doi.org/10.1016/j.matchemphys.2020.122806.
- S. Yotthuan et al., Effect of firing conditions on phase formation, microstructure, and electrical properties of (K0.5Na0.5)(Nb0.7Ta0.3)O3 ceramics synthesized by solid-state combustion method, J. Electron. Mater. 40 (10), 6143–6155 (2020). DOI: https://doi.org/10.1007/s11664-020-08374-6.
- B. Chen et al., Ultrahigh storage density achieved with (1-x)KNN-xBZN ceramics, J. Eur. Ceram. Soc. 40 (8), 2936 (2020). DOI: https://doi.org/10.1016/j.jeurceramsoc.2020.03.003.
- J. T. Zeng, K. W. Kwok, and H. L. W. Chan, KxNa1-xNbO3 powder synthesized by molten-salt process, Mater. Lett. 61 (2), 409 (2007). DOI: https://doi.org/10.1016/j.matlet.2006.04.083.
- M. Sindhu et al., Rietveld refinement and impedance spectroscopy of calcium titanate, Curr. Appl. Phys. 12 (6), 1429 (2012). DOI: https://doi.org/10.1016/j.cap.2012.03.034.
- Y. Cheng et al., Investigation of high piezoelectric properties of KNNSb-SrxBNZ ceramics, J. Alloys Compd. 815 (1), 152252 (2020). DOI: https://doi.org/10.1016/j.jallcom.2019.152252.
- S. Dwivedi, T. Pareek, and S. Kumar, Structure, dielectric, and piezoelectric properties of K0.5Na0.5NbO3-based lead-free ceramics, RSC Adv. 8 (43), 24286 (2018). DOI: https://doi.org/10.1039/C8RA04038A.
- P. R. Bueno et al., Sintering and mass transport features of (Sn, Ti)O2 polycrystalline ceramics, J. Eur. Ceram. Soc. 23 (6), 887 (2003). DOI: https://doi.org/10.1016/S0955-2219(02)00234-0.
- M. A. Rafiq et al., Defects and charge transport in Mn-doped K0.5Na0.5NbO3 ceramics, Phys. Chem. Chem. Phys. 17 (37), 24403 (2015)., DOI: https://doi.org/10.1039/C5CP02883C.
- J. K. Lee et al., Electrical properties of [Li0.04(K0.5Na0.5)0.96-xAgx](Nb1-ySby)O3 ceramics, Ceram. Int. 38 (5), s339 (2012). DOI: https://doi.org/10.1016/j.ceramint.2011.04.115.
- P. Kumar, and M. Pattanail, Sonia, Synthesis and characterizations of KNN ferroelectric ceramics near 50/50 MPB, Ceram. Int. 39 (1), 65 (2013). DOI: https://doi.org/10.1016/j.ceramint.2012.05.093.
- H. Dai et al., Structural and electric properties of polycrystalline Bi1-xErxFeO3 ceramics, Ceram. Int. 39 (5), 5373 (2013). DOI: https://doi.org/10.1016/j.ceramint.2012.12.043.
- X. P. Jiang et al., Effects of MnO doping on properties of 0.97K0.5Na0.5NbO3-0.03(Bi0.5K0.5)TiO3 piezoelectric ceramics, J. Alloys Compd. 506 (1), 323 (2010). DOI: https://doi.org/10.1016/j.jallcom.2010.06.200.
- F. Fu et al., Electrical properties of Li doped sodium potassium niobate thick films prepared by a tape casting process, J. Alloys Compd. 509 (25), 7130 (2011). DOI: https://doi.org/10.1016/j.jallcom.2011.04.029.
- R. Mahdi et al., High-performance (K, Na)NbO3-based binary lead-free piezoelectric ceramics modified with acceptor metal oxide, Ceram. Int. 46 (13), 21762 (2020). DOI: https://doi.org/10.1016/j.ceramint.2020.05.287.