References
- Y. Sun et al., Enhanced machinability of Ti-5553 alloy from cryogenic machining: Comparison with MQL and flood-cooled machining and modeling, J. Procedia Cirp 31, 477 (2015). DOI: https://doi.org/10.1016/j.procir.2015.03.099.
- I. S. Jawahir et al., Surface integrity in material removal processes: Recent advances, J. CIRP Ann. 60 (2), 603 (2011). DOI: https://doi.org/10.1016/j.cirp.2011.05.002.
- S. Sartori et al., Surface integrity analysis of Ti6Al4V after semi-finishing turning under different low-temperature cooling strategies, J. Mater. Eng. Perform. 27 (9), 4810 (2018). DOI: https://doi.org/10.1007/s11665-018-3598-x.
- M. Dhananchezian and M. P. Kumar, Cryogenic turning of the Ti–6Al–4V alloy with modified cutting tool inserts, J. Cryog. 51 (1), 34 (2011). DOI: https://doi.org/10.1016/j.cryogenics.2010.10.011.
- E. G. Plaza and P. J. N. López, Application of the wavelet packet transform to vibration signals for surface roughness monitoring in CNC turning operations, J. Mech. Syst. Signal Process. 98, 902 (2018). DOI: https://doi.org/10.1016/j.ymssp.2017.05.028.
- S. Arfaoui, F. Zemzemi, and Z. Tourki, A numerical-analytical approach to predict white and dark layer thickness of hard machining, Int. J. Adv. Manuf. Technol. 96 (9-12), 3355 (2018). DOI: https://doi.org/10.1007/s00170-018-1831-2.
- C. H. Che-Haron, Tool life and surface integrity in turning titanium alloy, J. Mater. Process. Technol. 118 (1-3), 231 (2001). DOI: https://doi.org/10.1016/S0924-0136(01)00926-8.
- G. Rotella et al., The effects of cooling conditions on surface integrity in machining of Ti6Al4V alloy, Int. J. Adv. Manuf. Technol. 71 (1-4), 47 (2014). DOI: https://doi.org/10.1007/s00170-013-5477-9.
- J. I. Hughes, A. R. C. Sharman, and K. Ridgway, The effect of cutting tool material and edge geometry on tool life and workpiece surface integrity, J. Proc. Inst. Mech. Eng. 220 (2), 93 (2006). DOI: https://doi.org/10.1243/095440506X78192.
- F. Zhang et al., Effects of cutting conditions on the microstructure and residual stress of white and dark layers in cutting hardened steel, J. Mater. Process. Technol. 266, 599 (2019). DOI: https://doi.org/10.1016/j.jmatprotec.2018.11.038.
- A. R. C. Sharman, J. I. Hughes, and K. Ridgway, An analysis of the residual stresses generated in Inconel 718TM when turning, J. Mater. Process. Technol. 173 (3), 359 (2006). DOI: https://doi.org/10.1016/j.jmatprotec.2005.12.007.
- A. L. Mantle and D. K. Aspinwall, Surface integrity of a high speed milled gamma titanium aluminide, J. Mater. Process. Technol. 118 (1-3), 143 (2001). DOI: https://doi.org/10.1016/S0924-0136(01)00914-1.
- D. A. Axinte and R. C. Dewes, Surface integrity of hot work tool steel after high speed milling-experimental data and empirical models, J. Mater. Process. Technol. 127 (3), 325 (2002). DOI: https://doi.org/10.1016/j.cirp.2011.05.002.
- G. Dong et al., Investigation on ultrasonic elliptical vibration boring of deep holes with large depth–diameter ratio for high-strength steel 18Cr2Ni4WA, Int J Adv Manuf Technol 108 (5-6), 1527 (2020). DOI: https://doi.org/10.1007/s00170-020-05531-3.